• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.93-102
• /
• 2021

In this article, withdrawal resistances of axially loaded self-tapping screws on wood products made by Korean Larch were predicted with existing estimation equation, and compared with experimental test data. The research was required because no design methodology for the withdrawal resistance of self-tapping screw is present in Korean building code (KBC). First, the withdrawal resistance of wood screw was predicted to use the withdrawal design value estimation equation in National Design Specification for Wood Construction (NDS). Second, three types of wood products, solid wood, cross-laminated timber (CLT) and plywood, were utilized for withdrawal test. For decades, various engineered wood products have been developed, especially cross-laminated timber (CLT) and hybrid timber composites such as timber composites of solid wood and plywood. Therefore, CLT and plywood were also investigated in this study as well as solid wood. Finally, the predicted values were compared with experimentally tested values. As the results, the tested values of solid wood and CLT were higher than the predicted values. In contrast, it is inaccurate to predict withdrawal resistance of plywood since prediction was higher than tested values.

• Journal of the Korean Wood Science and Technology
• /
• 제49권2호
• /
• pp.181-190
• /
• 2021

Screw-type fasteners are widely used to make connections between wood members or between wood and steel connectors because they can tolerate the applied loads by withdrawal or shearing. In this study, we evaluated the withdrawal resistances of the screw-type fasteners and analyzed the effects of the lead-hole size, relative grain direction (tangential, radial, and cross-sections) of the wood member, screw diameter, screw type, and species. Two wood species, including domestic larch and imported spruce, and three screw-type fasteners, including domestic lag screws (diameters of 9.46, 7.79, and 6.27 mm), domestic tapping screw (diameter, 6.3 mm), and imported Sherpa screw (diameter, 8.0 mm) were used. To assess the effect of lead-hole size, the lead holes with diameters corresponding to 68.7%, 70.8%, and 74.0% of the shank diameter of the lag screw were predrilled. The lead hole corresponding to 74% of the shank diameter was selected for this study because the smaller lead holes required higher rotational force for installation, which may cause damage in the screw neck, although there was no significant difference in the withdrawal resistance depending on the lead-hole sizes applied in this study. The lag screws installed on the tangential and radial surfaces showed similar withdrawal resistances to each other, which were greater than those installed on the cross-sectional surface. As the lag screw diameter increased from 6.27 mm to 9.46 mm, the withdrawal resistance also increased proportionally. The withdrawal resistance of the tapping screw having a diameter of 6.3 mm was almost 1.6 times higher than that of the lag screw having a similar diameter of 6.27 mm, while that of Sherpa screw having a diameter of 8.0 mm was around 1.4 times higher than that of the lag screw having a similar diameter of 7.79 mm.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.1-8
• /
• 1999

The use of structural wood based panels like plywood, OSB in many applications involves the use of nails, and data on the performance of panel-nail connection are needed for design and comparative purpose. This study was carried out to develop basic information on nail performance(withdrawal, embedding, nailhead push through) with water absorption in plywood and OSB. In withdrawal resistance test, initial stiffness of plywood performed better than OSB in 24hr soaked condition. The soaked condition reduced average nail withdrawal resistance value about 46% (12d mail), 53%(8d nail) in OSB, 17%(12d mail), 24%(8d mail) in plywood. The nail embedding strength of plywood also performed better than that of OSB and retention value(wet strength/dry strength) yielded similar in each nail types. The nail head push through capacity of OSB was higher than that of plywood in dry condition, but equal or lower in soaked condition. Therefore, critical consideration about structural panels is required in moist applications. The average values of nail withdrawal, nail embedding strength and nail head push through resistance of tested materials meet the minimum requirement of various specification and standards.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.18-25
• /
• 2011

This experiment was carried out to investigate the effects of nail diameter, driving distance from end on the nail check length, and the effects of nail diameter, prehole for nail driving, and nail driving slope on the nail withdrawal resistance, by the static test of universal testing machine. The test specimen were Japanese cedar (Cryptomeria japonica D. Don.) boards grown in southern district of Korea, and the nails for test were 2.02～4.82 mm in diameter. After nail driving, the back face checks of test boards were longer than the surface checks. The optimum nail diameter without checks or loss of nail withdrawal resistance were below 10% of board width and the optimum driving distance from end of boards were ten multiple of nail diameter. The relation between nail diameter (x) and withdrawal resistance (y) was linear and the regression formulae for Japanese cedar board was y = 8.66x + 7.6 ($R^2=0.978$). As both of the prehole diameter and driving slope were increased, the withdrawal resistances were significantly decreased.

• Journal of the Korean Wood Science and Technology
• /
• 제41권3호
• /
• pp.211-220
• /
• 2013

경골목조건축에서 못 접합부는 수평하중을 지지하고 전달하도록 설계되지만, 바람으로 인한 상향력처럼 인발하중에 직면하기도 한다. 본 연구에서는 경골목조건축에서 일반적으로 사용되는 구조재와 덮개로 구성된 못 접합부에 대하여 인발성능과 2면 전단시험을 통해 인발 및 측방하중에 대한 내력성능을 시험하고 설계기준에 부합되는 가를 평가하였다. 인발하중에 대한 내력성능은 부재의 비중에 의해 크게 좌우되었으며 I형장선의 경우 낮은 밀도에도 불구하고 높은 인발성능을 나타내었다. 최대 인발하중은 기준허용 최대 인발하중보다 매우 높게 나타났다. 전단성능도 비중이 큰 낙엽송과 오에스비로 구성된 접합부가 비중이 작은 SPF와 오에스비로 구성된 접합부보다 높은 성능을 나타내었으며 모두 기준설계치보다 높은 성능을 나타내었다. 접합부의 변형은 주로 못의 휨 변형에 의한 것으로 나타났으며 SPF와 오에스비로 구성된 접합부에서의 못의 휨 변형이 현저하게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제7권1호
• /
• pp.8-11
• /
• 1979

못의 보지력(保持力)인 정적인발저항(靜的引拔抵抗)에 관(關)하여 Pinus Koraiensis Sieb. et. Zucc. 재(材)와 Larix leptolepis Gord.재(材)의 두 수종(樹種)에 대하여 못 박은 후(後) 시간별(時間別) 차이(差異), 재(材)의 함수율별(含水率別) 및 Radial, Tangential, Longitudinal, 등(等)의 재(材)의 방향별(方向別)에 대해 실험(實驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 못을 박은 후(后) 인발저항(引拔抵抗)은 Larix leptolepis Gord. 재(材)에서는 Tangential이 최대(最大)였다.(Fig 3.) Pinus koraiensis Sieb. et. Zucc. 재(材)는 Tangential이나 Radial의 인발저항(引拔抵抗)은 차이(差異)가 없다.(Fig 2) 2) Longitudinal의 인발저항(引拔抵抗)은 두 수종(樹種) 모두 최소(最小)이다. (Fig 2, 3.) 3) 일정(一定)한 시간후(時間后)에는 Radial 및 Tangential는 두 수종(樹種)이 모두 감소(減少)한다. 4) 재(材)의 함수율(含水率)이 증가함에 따라 두 수종(樹種)이 인발저항(引拔抵抗)은 직선적(直線的)으로 감소(減少)한다. (Fig 4, 5) 5. Larix leptoleis Gord. 재(材)의 인발저항(引拔抵抗)의 감소상태(減少狀態)은 섬유포화점(纖維飽和点) 부근(附近)에서 변곡점으로 나타났다. (Fig 5)

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권11호
• /
• pp.1604-1608
• /
• 2000

Penicillin antibiotics such as penicillin G, ampicillin and amoxicillin have been widely used in the pig industry to control salmonellosis, bacterial pneumonia, and urinary tract infections. Extensive use of antibiotics in veterinary clinics has resulted in tissue residues and bacterial resistance. To prevent unwanted drug residues entering the human food chain, extensive control measures have been established by both government authorities and industries. The demands for reliable, simple, sensitive, rapid and low-cost methods for residue analysis of foods are increasing. In this study, we established a rapid prediction test for the detection of pigs with unacceptable tissue residues of penicillins. The recommended therapeutic doses of three penicillins, penillin G (withdrawal time, 7 days), ampicillin (withdrawal time, 7 days) and amoxicillin (withdrawal time, 14 days), were administered to three groups of 20 pigs each. Blood was sampled before drug administration and during the withdrawal period. The concentration of penicillins in plasma, determined by a semi-quantitative ELISA, were compared to that of internal standard, 4 ppb, which corresponded to the Maximum Residue Limit in milk. The absorbance ratio of internal standard to sample (B/Bs) was employed as an index to determine whether drug residues in pig tissues were negative or positive. That is, a B/Bs ratio less than 1 was considered residue positive, and larger than 1 negative. All 60 plasma samples from pigs were negative to three penicillins at pretreatment. Penicillin G could be detected in the plasma of the treated pigs until day 4 post-treatment and ampicillin until day 2, whereas amoxicillin could be detected until day 10 of its withdrawal period. The present study showed that the semi-quantitative ELISA could be easily adapted to detect residues of penicillin antibiotics (penicillin G, ampicillin and amoxicillin) in live pigs.

• Parasites, Hosts and Diseases
• /
• 제60권2호
• /
• pp.109-116
• /
• 2022

Drug resistance is an important problem hindering malaria elimination in tropical areas. Point mutations in Plasmodium falciparum dihydrofolate reductase (Pfdhfr) and dihydropteroate synthase (Pfdhps) genes confer resistance to antifolate drug, sulfadoxine-pyrimethamine (SP) while P. falciparum chloroquine-resistant transporter (Pfcrt) genes caused resistance to chloroquine (CQ). Decline in Pfdhfr/Pfdhps and Pfcrt mutations after withdrawal of SP and CQ has been reported. The aim of present study was to investigate the prevalence of Pfdhfr, Pfdhps, and Pfcrt mutation from 2 endemic areas of Thailand. All of 200 blood samples collected from western area (Thai-Myanmar) and southern area (Thai-Malaysian) contained multiple mutations in Pfdhfr and Pfdhps genes. The most prevalent haplotypes for Pfdhfr and Pfdhps were quadruple and double mutations, respectively. The quadruple and triple mutations of Pfdhfr and Pfdhps were common in western samples, whereas low frequency of triple and double mutations was found in southern samples, respectively. The Pfcrt 76T mutation was present in all samples examined. Malaria isolated from 2 different endemic regions of Thailand had high mutation rates in the Pfdhfr, Pfdhps, and Pfcrt genes. These findings highlighted the fixation of mutant alleles causing resistance of SP and CQ in this area. It is necessary to monitor the re-emergence of SP and CQ sensitive parasites in this area.

• Composites Research
• /
• 제21권1호
• /
• pp.8-15
• /
• 2008

담지 방법을 통해 유리 기판 위에 단일벽탄소나노튜브 네트워크를 형성하였고, 코팅 공정변수(담지 횟수, 콜로이드 용액의 농도, 기판의 인출 속도)에 따른 탄소나노튜브 네트워크의 전기적 및 광학적 특성 변화를 관찰하였다. 그 결과 네트워크의 면저항 및 투과도는 코팅 공정변수들에 의해 민감하게 조절됨을 확인할 수 있었다. 탄소나노튜브 네트워크는 매우 균일한 면저항을 보이는 동시에, 가시광선 영역에서 우수한 투과도 특성을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.8-14
• /
• 2011

한국 전통 목구조양식에서 뼈대구조인 기둥-보 접합부를 이용하여 현대적인 기법을 적용한 목구조 접합을 개발하기 위하여 낙엽송 집성재를 구조부재로 사용하였다. 집성재를 이용한 전통 접합기술과 드리프트핀 접합으로 구성된 접합부의 부재는 공장에서 프리커트에 의해 가공하였다. 뼈대구조의 전체 성능을 파악하고 향상시키기 위한 기초 연구로서 핀접합부의 인발내력 시험과 각 접합부의 모멘트저항 시험을 행하였다. 본 연구에서 사용된 기둥-보 부재는 본 연구에서 사용된 주각부 및 보단부 접합철물로 이루어진 접합부에서 우수한 모멘트저항성능을 발휘하였다. 핀의 세장비에 따라 초기강성은 세장비가 클수록 다소 높게 나타났으며, 모멘트저항성능인 휨모멘트와 최대모멘트는 세장비가 작을수록 우수함을 알 수 있었다.