• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2267-2273
• /
• 2016

In this paper, WiMedia Distributed-MAC protocol is adopted for development of an OSMU (One Source Multi Use) N-screen wireless multicast service. But, when considering wireless communication environment where channel error rate is time-variant, N-screen high-speed data is vulnerable to be lost. For this problem, a multicast relay scheme is proposed by analyzing Distributed-MAC protocol. In proposed multicast relay scheme, Multicast-free DRP Availability IE is combined and the relay node suitable for N-screen multicast transmissions is selected. Through this operation, it can avoid wireless channel with high errors and can transmit N-screen high-speed data. In simulation results, the proposed multicast relay scheme is compared with conventional Distributed-MAC multicast scheme in view points of throughput and energy consumption according to various numbers of multicast nodes and BER (Bit Error Rate) values in wireless channel. Through simulation results, it is explained that proposed multicast relay scheme should be adopted in WiMedia Distributed-MAC protocol to realize OSMU N-screen wireless multicast services.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.143-152
• /
• 2022

The ongoing adoption of 5G will increase the data traffic, throughput, multimedia services, and power consumption for future wireless applications and services, including sensor and mobile networks. Multipath fading on wireless channels also reduces the system performance and increases energy consumption. To address these issues, device-to-device (D2D) and cooperative communications have been proposed. In this study, we propose two inter-clustering models using the relay selection method to improve system performance and increase energy efficiency in cooperative D2D networks. We develop two inter-clustering models and present their respective algorithms. Subsequently, we run a computer simulation to evaluate each model's outage probability (OP) performance, throughput, and energy efficiency. The simulation results show that inter-clustering model II has the lowest OP, highest throughput, and highest energy efficiency compared with inter-clustering model I and the conventional inter-clustering-based multirelay method. These results demonstrate that inter-clustering model II is well-suited for use in 5G overlay D2D and cellular communications.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.640-652
• /
• 2012

Many studies have investigated the smart grid architecture and communication models in the past few years. However, the communication model and architecture for a smart grid still remain unclear. Today's electric power distribution is very complex and maladapted because of the lack of efficient and cost-effective energy generation, distribution, and consumption management systems. A wireless smart grid communication system can play an important role in achieving these goals. In this paper, we describe a smart grid communication architecture in which we merge customers and distributors into a single domain. In the proposed architecture, all the home area networks, neighborhood area networks, and local electrical equipment form a local wireless mesh network (LWMN). Each device or meter can act as a source, router, or relay. The data generated in any node (device/meter) reaches the data collector via other nodes. The data collector transmits this data via the access point of a wide area network (WAN). Finally, data is transferred to the service provider or to the control center of the smart grid. We propose a wireless cooperative communication model for the LWMN.We deploy a limited number of smart relays to improve the performance of the network. A novel relay selection mechanism is also proposed to reduce the relay selection overhead. Simulation results show that our cooperative smart grid (coopSG) communication model improves the end-to-end packet delivery latency, throughput, and energy efficiency over both the Wang et al. and Niyato et al. models.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.72-76
• /
• 2012

In this paper, the capacity criteria have been proposed in order to select a cooperative relay node in WSNs, under the environment where direct path has a poor link gain. This process may ensure the efficiency improvement of signal transfer between source and destination and reduction of energy consumption as well. Two criteria are incorporated to select a cooperative relay node. Firstly, calculate the energy gain ratio between the relay path and the direct path. Secondly, investigate the effects of relay node's usage in WSNs through the simulation in terms of energy consumption. In the simulation, the relationship between energy consumption and direct path gain, uniformly generated in the certain range and its positive effects have been identified.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.558-568
• /
• 2011

In this paper, we propose an efficient macrodiversity handover (MDHO) technique for time-division-based interference-limited IEEE 802.16j multihop wireless relay networks. In the proposed MDHO, when the diversity set members of the mobile station (MS) are a base station (BS) and relay station (RS), the MS receives the signal transmitted by the BS in the first phase. During the second phase, it also receives the simultaneous transmissions of the BS and RS. Furthermore, when the diversity set members are two RSs or two BSs, the MS receives only the simultaneous transmissions of the diversity set members. The superiority of the proposed MDHO is validated using analytical and simulation results. The performance analysis metrics are the average downlink (DL) carrier to interference and noise ratio (CINR), the average DL spectral efficiency, and the average service outage probability. Evaluation results show that the proposed MDHO significantly outperforms the conventional MDHO. The CINR gain achieved using the proposed MDHO is 4.71 dB compared to the conventional MDHO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.198-201
• /
• 2015

The prompt and accurate location determination of the nodes of the wireless indoor shipboard networks is crucial to forming the stable wireless shipboard sensor networks. To this end in this paper it can be achieved through the measurement of the bi-directional channel qualities among the nodes after the locations of the sensor nodes temporarily placed. For the 1st stage the piconet-type sensor networks are considered to measure the channel qualities between a specific node and the cluster node which is the master node. After finishing the 1st stage measurement the nodes needing the relay nodes are selected and the measurement action goes into the 2nd stage. In the 2nd stage the measurement between a candidate relay node and the node needing a relay node starts to begin. After the 2nd stage the relay nodes to connect to the cluster node are fixed and the information delivery paths between a node and the cluster head are established. In this paper the measurement results in the realistic environment are gathered and analysed to show that the measurement procedure can be applied in the wireless indoor shipboard networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3542-3566
• /
• 2018

In this paper, we investigate a buffer-aided wireless powered cooperative communication network (WPCCN), in which the source and relay harvest the energy from a dedicated power beacon via wireless energy transfer, then the source transmits the data to the destination through the relay. Both the source and relay are equipped with an energy buffer to store the harvested energy in the energy transfer stage. In addition, the relay is equipped with a data buffer and can temporarily store the received information. Considering the buffer-aided WPCCN, we propose two buffer-aided relaying protocols, which named as the buffer-aided harvest-then-transmit (HtT) protocol and the buffer-aided joint mode selection and power allocation (JMSPA) protocol, respectively. For the buffer-aided HtT protocol, the time-averaged achievable rate is obtained in closed form. For the buffer-aided JMSPA protocol, the optimal adaptive mode selection scheme and power allocation scheme, which jointly maximize the time-averaged throughput of system, are obtained by employing the Lyapunov optimization theory. Furthermore, we drive the theoretical bounds on the time-averaged achievable rate and time-averaged delay, then present the throughput-delay tradeoff achieved by the joint JMSPA protocol. Simulation results validate the throughput performance gain of the proposed buffer-aided relaying protocols and verify the theoretical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.345-355
• /
• 2011

This paper introduces the coded cooperation protocol in wireless relay network. We propose a two relay based coded cooperation protocol with RCPC codes for wireless networks. The proposed two-relay based system can achieve a diversity of order 4 under slow fading environment. Under fast fading, the diversity order is 2 times of the free distance of the convolutional code. We develop upper bounds on BER and FER for the system under both slow and fast fading with Rayleigh distribution. The effect of various channel conditions on the cooperation is also examined in this work.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.133-142
• /
• 2011

Coded cooperation that integrates channel coding in cooperative transmission has gained a great deal of interest in wireless relay networks. The performance analysis of coded cooperation protocol with multiple relays is investigated in this paper. We show that the diversity order achieved by the coded cooperation in a multi-relay wireless network is not only dependent on the number of cooperating relays but is also dependent on the code-rate of the system. We derive the code-rate bound, which is required to achieve the full diversity gain of the order of cooperating nodes. The code-rate required to achieve full diversity is a linearly decreasing function of the number of available relays in the network. We show that the instantaneous channel state information (CSI)-based relay selection can effectively alleviate this code-rate bound. Analysis shows that the coded cooperation with instantaneous CSI-based relay selection can achieve the full diversity, for an arbitrary number of relays, with a fixed code-rate. Finally, we develop tight upper bounds for the bit error rate (BER) and frame error rate (FER) of the relay selection based on coded cooperation under a Rayleigh fading environment. The analytical upper bounds are verified with simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1580-1588
• /
• 2016

Recently, as the proliferation of mobile smart devices, multimedia content sharing technologies between mobile smart devices have provided. For efficient content sharing in wireless networks, the hierarchical streaming network has been proposed. However, member devices in a network group experience frequent delay while playing multimedia content files because of excessive network resource occupation between a relay and member devices. In this paper, we propose an efficient multimedia streaming relay method using media buffer control to reduce network congestion during streaming from the relay device to the member devices. We also measured the number of buffering and buffering time of the proposed relay engine and compared them with the performance of the existing relay engine.