• Journal of the Korea Society of Computer and Information
• /
• v.29 no.6
• /
• pp.175-182
• /
• 2024

In wireless sensor networks, batteries limit lifespan, and heavy data transmission around the sink causes the hotspot problem. To address this, data collection amounts are allocated to child nodes to limit transmission. However, this approach has issues with nodes far from the sink having excessive energy and failing to transmit the allocated amount due to data transmission errors. This paper proposes a method to prevent sensor data loss through error recovery via retransmission. The method ensures that each node's retransmission volume stays within its allocated data amount and energy limits, using excess energy for error recovery. Simulations show that this technique effectively recovers data transmission errors, collects data, minimizes energy depletion around the sink, and increases data collection rates.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.870-872
• /
• 2007

Sensor networks have been widely applied for data collection. Due to the energy limitation of the sensor nodes and the most energy consuming data transmission, we should allocate as much work as possible to the sensors, such as data compression and aggregation, to reduce data transmission and save energy. Querying extreme values is a general query type in wireless sensor networks. In this paper, we propose a novel querying method called Two-Level Filter (TLF) for querying extreme values in wireless sensor networks. We first divide the whole sensor network into domains using the Distributed Data Aggregation Model (DDAM). The sensor nodes report their data to the cluster heads using push method. The advantages of two-level filter lie in two aspects. When querying extreme values, the number of pull operations has the lower boundary. And the query results are less affected by the topology changes of the wireless sensor network. Through this method, the sensors preprocess the data to share the burden of the base station and it combines push and pull to be more energy efficient.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1147-1150
• /
• 2006

Stream Control Transmission Protocol (SCTP) uses the 32-bit checksum in the common header, by which a corrupted SCTP packet will be regarded as a lost packet and then discarded. This may result in degradation of SCTP's throughput performance over wireless networks. This paper proposes a new chunk checksum scheme for SCTP, in which each data chunk contains its own checksum field and SACK chunk carry corresponding Transmission Sequence Number (TSN) with timestamp for every corruption event. The proposed chunk checksum scheme is introduced with the following three purposes: 1) to distinguish the chunk corruptions from the chunk losses; 2) to avoid the unnecessary halving of the congestion window (cwnd) in the case of chunk corruption; 3) to avoid the unwanted timeouts which can be induced in conventional SCTP in the case that the retransmitted data chunks are corrupted again in wireless networks. Simulation results show that the proposed chunk checksum scheme could improve the SCTP throughput in the wireless environments with a high bit error rate.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.16-19
• /
• 2012

A modified 4-coil magnetic resonance wireless power transfer (MRWPT) system is proposed. Four coils based on 2-coil system with additional two matching coils were used in this topology. When Tx-Rx distance is changed, the input impedance is changed. However, it can be adjusted by coil parameters of matching coils to maintain impedance matching for maximum efficiency. The equivalent circuit of MRWPT system was analyzed for both transmission function and optimum coupling coefficient of the matching coils. By using four spiral resonant coils, these design considerations was experimentally verified. The measured data agreed well with the calculated data and the transmission function of the proposed system was more efficient than that of conventional 2-coil system.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1519-1526
• /
• 2017

The existing DSRC(Dedicated Short Range Communication) scheme has a limitation in providing various services through short-range wireless communication. Therefore, it is necessary to develop an intelligent WAVE/DSRC hybrid wireless platform that can improve data transmission speed and extend the effective communication range. This paper introduces WAVE/DSRC integrated platform technology using WAVE(Wireless Access in Vehicle Environments) to overcome the disadvantages of DSRC. First, the desinged software configuration of the WAVE/DSRC integrated platform is described. Then each task operation scheme and WAVE software design are described. By applying the WAVE/DSRC integrated platform, we can compensate the shortcomings of DSRC. It can provide more accurate and reliable services.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2015

In this paper, wireless communication from a smart phone to a hearing aid using audible frequency band sound was considered. 1kHz single channel carrier frequency was applied for amplitude shift keying (ASK) binary data modulation, and the result of the transmission and reception was tested. The overall system process was precisely explained and experimentally evaluated. The result will be applied for realizing a digital hearing aid with remote control feature by a smart phone.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.219-221
• /
• 2003

This system is Emergency patient medical examination and treatment way through biosignal transmission to use PDA. Store measured biosignal that is stored to file to database by Application, This system helps doctor's treatment that transmit patient's biosignal data and patient's symptoms use wireless internet. ThenOffer more than safer medical treatment environment to a doctor and patient

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.197-205
• /
• 2018

Nowadays, wireless sensor networks (WSNs) have been widely adopted in structural health monitoring (SHM) systems for social overhead capital (SOC) public infrastructures. Structural health information, environmental disturbances and sudden changes of weather conditions, damage detections, and external load quantizing are among the capabilities required of SHM systems. These information requires an efficient transmission with which an efficient mobility management support for wireless networks can provide. This paper deals with the analysis of mobility management schemes in order to address the real-time requirement of data traffic delivery for critical SHM information. The host-based and network-based mobility management protocols have been identified and the advantages of network mobility (NEMO) enabled Proxy Mobile Internet Protocol version 6 (PMIPv6) have been leveraged in order to address the SHM information transmission needs. The scheme allows an efficient information transmission as it improves the handover performance due to shortened handover latency as well as reduced signaling overhead.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.728-736
• /
• 2014

Due to the recent development of mobile wireless telecommunication, RRHs(Remote Radio Heads) are widely being utilized to expand the cell coverage. Wire-link, an existing connection between DU(Digital Unit) and RRH through fiber cables, is considered to have limitations in relation to cost for a wide range of applications. This paper focuses on replacing the wire-link by wireless transmission using millimeter-wave, and implementing cellular network system through RRH from a remote location. After an influence element analysis on millimeter-wave wireless link transmissions, a comparative analysis between wireless link and an existing fiber link method will be made by utilizing currently commercialized LTE(Long Term Evolution), to prove the compatibility of millimeter-wave wireless link RRH method in replacing fiber link method without a significant decline in data transmission performance.