• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.37-38
• /
• 2010

For MHz-class high frequency inverter in wireless power transfer applications, the voltage/current surges can be occurred in power stage when driving on the inverter. And also, the high-frequency oscillations can be produced at a high switching frequency due to the parasitic elements. The voltage and current stresses of the switching devices lead to the switching losses. The efficiency of the high frequency inverter will be reduced. And the inverter circuit with the sudden voltage and current fluctuations also generates the noise such as the EMI. Zero voltage, zero current switching technique can be used to reduce the switching loss and the noise. The high power density and high efficiency can be obtained. In this paper, the high-frequency inverter for short-range wireless power transfer applications was discussed. The feasible inverter circuit is analyzed in the circuit operating characteristics and the results are verified by the simulation.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2013

Wearable computer systems use the wireless universal serial bus (WUSB), which refers to USB technology that is merged with WiMedia physical layer and medium access control layer (PHY/MAC) technical specifications. WUSB can be applied to wireless personal area network (WPAN) applications as well as wired USB applications such as PAN. WUSB specifications have defined high-speed connections between a WUSB host and WUSB devices for compatibility with USB 2.0 specifications. In this paper, we focus on an integrated system with a WUSB over an IEEE 802.15.6 wireless body area network (WBAN) for wireless wearable computer systems. Due to the portable and wearable nature of wearable computer systems, the WUSB over IEEE 802.15.6 hierarchical medium access control (MAC) protocol has to support power saving operations and integrate WUSB transactions with WBAN traffic efficiently. In this paper, we propose a low-power hibernation technique (LHT) for WUSB over IEEE 802.15.6 hierarchical MAC to improve its energy efficiency. Simulation results show that the LHT also integrates WUSB transactions and WBAN traffic efficiently while it achieves high energy efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.157-162
• /
• 2007

With the success of wireless technologies in consumer electronics, standard wireless technologies are envisioned for the deployment in industrial environments as well. Industrial applications involving mobile subsystems or just the desire to save cabling make wireless technologies attractive. Nevertheless, these applications often have stringent requirements on reliability and timing. In wired environments, timing and reliability are well catered for by fieldbus systems. When wireless links are included, reliability and timing requirements are significantly more difficult to meet, due to the adverse properties of the radio channels. In this paper, we thus discuss some key issues coming up in wireless fieldbus and wireless industrial communication systems.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.338-344
• /
• 2021

The recently continuous enhancement and development in the biomedical side for the betterment of human life. The Wireless Body Area Networks is a significant tool for the current researcher to design and transfer data with greater data rates among the sensors and sensor nodes for biomedical applications. The core area for research in WBANs is power efficiency, battery-driven devices for health and medical, the Charging limitation is a major and serious problem for the WBANs.this research work is proposed to find out the optimal solution for battery-friendly technology. In this research we have addressed the solution to increasing the battery lifetime with variable data transmission rates from medical equipment as Wireless Endoscopy Capsules, this device will analyze a patient's inner body gastrointestinal tract by capturing images and visualization at the workstation. The second major issue is that the Wireless Endoscopy Capsule based systems are currently not used for clinical applications due to their low data rate as well as low resolution and limited battery lifetime, in case of these devices are more enhanced in these cases it will be the best solution for the medical applications. The main objective of this research is to power optimization by reducing the power consumption of the battery in the Wireless Endoscopy Capsule to make it battery-friendly. To overcome the problem we have proposed the algorithm for "Battery Friendly Algorithm" and we have compared the different frame rates of buffer sizes for Transmissions. The proposed Battery Friendly Algorithm is to send the images on average frame rate instead of transmitting the images on maximum or minimum frame rates. The proposed algorithm extends the battery lifetime in comparison with the previous baseline proposed algorithm as well as increased the battery lifetime of the capsule.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2009

In this paper, a new 1 kW power amplifier with high efficiency and high stability in a RF generator is designed and fabricated for plasma applications. The efficiency of power amplifier is improved by using class-E amplifier that consists of one push-pull MOSFET and high current drive IC instead of class-C amplifier composed of several single ended MOSFET. Switchable damper that allows selecting three different modes of amplifiers for considering efficiency and stability is added into the amplifier for plasma applications. Stable region of an early electronic discharge section is extended to VSWR of 4.5:1 compared to conventional VSWR of 3.8:1 through using switchable damper. The dimension of the amplifier is also reduced to 30 % of conventional amplifier. The 80 % efficiency of power amplifier with switchable damper is obtained the output power of 1 kW in operating frequency of 13.56 MHz. In comparison of conventional power amplifier for plasma applications, 13 % efficiency is improved.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.277-280
• /
• 2005

In this paper, we propose a frequency synthesizer for dualband repeater. The dual-band RF technology for applications to the wireless repeater for CDMA and WCDMA mobile communications has been developed in this paper. The dualband PLL module consisted of dual-band VCO and one PLL IC has been developed. The main technological efforts for the dual-band PLL module is to suppress the intermodulation distortion by applying the miniature ceramic filter using the slow wave characteristics. The dual-band miniature RF module including dual-band PLL module and one MCU controller is very attractive for applications to the miniature dual-band RF mobile repeaters.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.13-24
• /
• 2005

The sensor network is a key component of the ubiquitous computing system which is expected to be widely utilized in logistics control, environment/disaster control, medical/health-care services, digital home and other applications. Nodes in the sensor network are small-sized and exposed to adverse environments. They are demanded to perform their missions with very limited power supply only. Also the sensor network is composed of much more nodes than the wireless ad hoc networks are. In case that some nodes consume up their power capacity, the network topology should change, and rerouting/retransmission is necessitated. Communication protocols studied for conventional wireless networks or ad hoc networks are not suited for the sensor network resultantly. Schemes should be devised to control the efficient usage of node power in the sensor network. This paper proposes a medium access protocol to enhance the efficiency of energy consumption in the sensor network node. Its performance is analyzed by simulation.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.27-30
• /
• 2005

Because of unreplenishable power resources, reducing node energy consumption to extend network lifetime is an important requirement in wireless sensor networks. In addition both path length and path cost are important metrics affecting sensor lifetime. We propose a dynamic clustering scheme based on location in wireless sensor networks. Our scheme can localize the effects of route failures, reduce control traffic overhead, and thus enhance the reachability to the destination. We have evaluated the performance of our clustering scheme through a simulation and analysis. We provide simulation results showing a good performance in terms of approximation ratios.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.195-198
• /
• 2005

UWB is the most spotlighted wireless technology that transmits data at very high rates using low power over a wide spectrum of frequency band. UWB technology makes it possible to transmit data at rate over 100Mbps within 10 meters. To preserve important header information, MBOFDM UWB adopts Reed-Solomon(23,17) code. In receiver, RS decoder needs high speed and low latency using efficient hardware. In this paper, we suggest the architecture of RS decoder for MBOFDM UWB. We adopts Modified-Euclidean algorithm for key equation solver block which is most complex in area. We suggest pipelined processing cell for this block and show the detailed architecture of syndrome, Chien search and Forney algorithm block. At last, we show the hardware implementation results of RS decoder for ASIC implementation.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.