• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.237-243
• /
• 2015

This paper presented the design of wireless power transfer (WPT) system using electromagnetic induction techniques and analysed WPT efficiency. Also, we presented the optimum coil condition by measuring the efficiency variation according to some receiving coil parameter changes. Voltage change is measured by receiving coil position for the designed transmitting and receiving circuit. Voltage change according to inductance variation at the same position and charging time are compared at the same environment by using a developed application program to realize an optimum WPT system. Developed wireless power transfer system using electromagnetic induction techniques uses 125 kHz. It takes 16 minutes by using wired charger, and 23 minutes by using wireless charger for charging from 50% to 60% charging status.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.713-722
• /
• 2017

In the future battlefield, the role of the unmanned vehicle is very important. Currently, charging and management systems for unmanned vehicles are all wired. However, for convenience and stability, it is desirable that the charging of the unmanned vehicle uses wireless power transfer system. In this paper, we have studied the application of wireless power transfer system to the charging of unmanned vehicles. Considering the size of the unmanned vehicle and the required power, the transmission coil and the receiving coil are designed through the finite element analysis based magnetic field simulation. The coil was made according to the simulation results and the circuit simulation was performed through the measured parameter values. Finally, we show that wireless power transmission can be applied to unmanned mobile charging through actual experiments.

• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.371-383
• /
• 2008

Application of network coding in wireless two-way relay channels (TWRC) has received much attention recently because its ability to improve throughput significantly. In traditional designs, network coding operates at upper layers above (including) the link layer and it requires the input packets to be correctly decoded. However, this requirement may limit the performance and application of network coding due to the unavoidable fading and noise in wireless networks. In this paper, we propose a new wireless network coding scheme for TWRC, which is referred to as soft network coding (SoftNC), where the relay nodes applies symbol-by-symbol soft decisions on the received signals from the two end nodes to come up with the network coded information to be forwarded. We do not assume further channel coding on top of SoftNC at the relay node (channel coding is assumed at the end nodes). According to measures of the soft information adopted, two kinds of SoftNC are proposed: amplify-and-forward SoftNC (AF-SoftNC) and soft-bit-forward SoftNC (SBF-SoftNC). We analyze the both the ergodic capacity and the outage capacity of the two SoftNC schemes. Specifically, analytical form approximations of the ergodic capacity and the outage capacity of the two schemes are given and validated. Numerical simulation shows that our SoftNC schemes can outperform the traditional network coding based two-way relay protocol, where channel decoding and re-encoding are used at the relay node. Notable is the fact that performance improvement is achieved using only simple symbol-level operations at the relay node.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1104-1113
• /
• 2007

As there have recently been a rapid development in a supercomputer network infrastructure and an increase in the use of wireless terminals such as a PDA and cellular phone, people realize that it is highly required that they develope a various types of application services to integrate wireless network and engage them. On top of that, because current appliances are being converted into digital domestic appliances, and network and such appliances react upon each other, domestic appliances are now evolving to Internet appliances. Thus, people eager to establish a home network, which can offer a various sorts of services to customers because such appliances can share and send the data when such appliances are connected to power lines, telephone wires, and IEEE1394. Along with this, people are also enthusiastically conducting a study on Internet Application, which monitor and control the internet appliances triggered by connecting home network and supercomputer network. This study focuses on designing and developing an integrated wireless home server by effectively integrating wire and wireless network: It can approach and control each internet appliance connected with the home network inside and outside the house. In this study we also test it with an internet appliance simulator.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.672-678
• /
• 2013

In this paper, with the development of Information technology, application service between IT and traditional industry has been on the rise. And there are many on-going discussions actively regarding the Air quality system based on wireless sensor network which monitor and control the aircraft environment automatically and manually with the application service of detecting harmful gas. In this paper, operation program constitute the administrator monitoring device, which collects data from sensor node of wireless sensor network and sensor node and transmits environment information to display and server. Also for remote monitoring, user operation program constitutes based on PC/smartphone. Under this, the harmful gas which is made in aircraft life is measured. Real time monitoring system based on wireless sensor network is designed and realized.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.271-279
• /
• 2014

In this paper, the two design techniques of the embedded system which provides a wireless image observation with temporary ad-hoc network are proposed and developed. The first method is based on the embedded system design technique for a nearly real-time wireless short observation application, having a specific remote monitoring node with a built-in image processing function, and having the maximum rate of 1 fps (frame per second) wireless image transmission capability of a $160{\times}128$size image. The second technique uses the embedded system for a general wireless long observation application, consisting of the main node, the remote monitoring node, and the system controller with built-in image processing function, and the capability of the wireless image transmission rate of 1/3 fps. The proposed system uses the wireless ad-hoc network which is widely accepted as a short range, low power, and bidirectional digital communication, the hardware are consisted of the general developed modules, a small digital camera, and a PC, and the embedded software based upon the Zigbee stack and the user interface software are developed and tested on the implemented module. The wireless environment analysis and the performance results are presented.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.228-232
• /
• 2014

The magnetic field generated by the feeding line of a wireless power transfer system induces voltage on the rail of a railway system. The induced voltage of the rail can have a bad influence on the track circuit and on safety. This paper simulated three feeding lines to study the relation between the feeding lines and the induced voltage of the rail; it also proposed magnetic field distribution of the feeding line to reduce the induced voltage.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.11-20
• /
• 2008

An inevitable trend in the next generation wireless network environments is coexistence of different wireless access networks in a complementary, manner. In addition, mobile devices equipped with multiple air interfaces simultaneously executing diverse applications have been emerging, In such network environment, It is required that a solution for mobile users to seamlessly roam between different access networks as well as to satisfy QoS requirements of each application by efficiently utilizing coexisting various wireless access networks. In this paper, therefore, we propose a mobility management platform based on per-application end-to-end mobility management and cross-layer handover controls. Four core functional modules composing the proposed platform for end user devices are defined: Monitoring Agents, Profile Database, Decision Engine, and IP Agent. We show through simulations that the presented platform provides an improved QoS as it selectively utilizes the best available networks.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.503-508
• /
• 2019

In recent years, among the IoT products that are used in various ways in everyday life, motorized products are increasing. This study aims to develop a microcontroller unit that can easily control multiple motors and develop an application that makes use of this microcontroller unit. The basis of the hardware developed by the research was the Arduino board, and to it, the Bluetooth module, Zigbee module, and a motor driver were connected. To control the device, an application was designed. The final microcontroller unit and its application may be applied to electric curtains, electric blinds, robots, and other various IoT products. Further research will lead to hardware development that can control various types of motors other than stepping motors.