• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.87-92
• /
• 2009

In this paper, we designed and fabricated the active amplification block for the integrated antenna module. The fabricated amplification module have a proper gain and low noise figure in the band of AM/FM band, T-DMB band and GPS band, and show good isolation performance for each band. Manufactured circuits satisfied the gain performance 7 dB in AM band, 11 dB in FM band, 10 dB in T-DMB, and 17 dB in GPS band. The integrated amplification block was realized by 35 mm*35 mm size, and was shown as the same sensitivity performance as compared with a conventional reference antennas.

• Information and Communications Magazine
• /
• v.33 no.10
• /
• pp.10-16
• /
• 2016

IEEE 802.15.7 VLC(Visible Light Communication) 규격 이후에 카메라 기반 ISC(Image Sensor Communication) 관련 개정 필요성이 제기되어서 현재 IEEE 802.15.7m OWC(Optical Wireless Communication) TG가 표준화를 진행 중에 있다. 2016년 5월에 결정된 Baseline Document D0를 기반으로 LiFi(Light Fidelity), OCC(Optical Camera Communication) 및 LED-ID(LED Identification) 기술로 간단하게 분류하고 각 핵심 변조 기법을 소개한다. 5세대 이동통신과 함께 사용될 수 있는 다양한 IoT/ M2M 응용 서비스(LED, 디지털사이니지, 방송, 자동차 안전, 디스플레이 등)들이 포함되어 있다. 국내에서 혁신적인 비즈니스 모델 발굴과 국내 산/학/연/관이 협력하여 가시광, 적외선 및 자외선 분야에서 적극적인 연구개발이 있어야 할 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.891-897
• /
• 2003

In this paper, a circular orthogonal polarizer is newly fabricated and used in a differential detector to reduce the optical noise in a wireless optical interconnection. The orthogonal polarizer is composed of two semicircular polarizers whose transmission axes are orthogonal each other, The orthogonal polarizer is driven by a motor and matched to the signal polarization in order to reduce the optical noise interference. The noise power was reduced by about 20 dB using a differential detector with the orthogonal polarizer.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.367-375
• /
• 2014

In this paper, a novel triple-band circular-ring monopole antenna with a half-circular ring and ground slot for wireless local area network/Worldwide Interoperability of Microwave Access (WLAN/WiMAX) applications is proposed. The proposed antenna consists of one circular ring, a half-circular ring and a rectangular slot in the ground plane. Based on the concept, a prototype of the proposed triple-band antenna was designed, fabricated and tested. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. Furthermore, this paper presents and discusses the 2D radiation patterns and 2D gains according to the results of the experiment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.706-709
• /
• 2009

The informatization of Korea is accompanied by the great growth of new strategic export industry, as of mobile phone or semiconductor LCD. Speaking to the situation of mobile phone, Motorola swept over the American domestic market in the beginning of 1990s, digital mobile communication as CDMA developed swiftly in Korea. In 1996, the first year's CDMA users of Samsung were merely one million, nevertheless, the world's sales in the first half of this year is up to 92 million. In this p aper I design 3D application based on J2ME and implement a freely removable 3D object which happened in a 3D scen e by receiving the keyboard response of mobile device with WTK (Wireless ToolKit) simulator. It contains benefits of improvement of relative speed and high-level functionality such as scene graph, keyframe animation, etc.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.759-766
• /
• 2022

In this paper, we propose a multi-band small antenna with CPW(Coplanar Waveguide) feeding structure WLAN(Wireless Local Area Network) and WiMAX (Worldwide Interoperability for Microwave Access) bands. The proposed antenna is designed two slit in the modified monopole type radiator and FR-4 substrate, which is thickness 1.0 mm, and the dielectric constant is 4.4. The size of proposed antenna is 15.1 mm⨯16.41 mm, and total size of proposed antenna is 17.5 mm⨯16.4 mm. From the fabrication and measurement results, From the fabrication and measurement results, bandwidths of 439 MHz (2.06 to 2.499 GHz), 840 MHz (3.31 to 4.25) and 1,315 MHz (5.23 to 6.545 GHz) were obtained on the basis of -10 dB impedance bandwidth. Also, 3D radiation pattern characteristics of the proposed antenna are displayed and measured gains 2.24 dBi, 2.83 dBi, and 2.0 dBi shown in the three frequency band, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.813-818
• /
• 2015

In this paper, WiMedia Distributed-MAC protocol is adopted for development of a seamless N-screen wireless service. Furthermore, to provide the OSMU (One Source Multi Use) N-screen service through P2P streaming in the seamless D-MAC protocol, a new Multicast-free DRP Availability IE is proposed and analyzed. In this Multicast-free DRP Availability IE, indicating Multicast DRP Owner and Receiver is required. The ACK frame transmissions are not required for Multicast transmissions in P2P N-screen services. Using this property, the Multicast-free DRP Availability IE scheme is proposed to expand the number of time slots available for unicast and multicast DRP reservations. Simulation results show that our Multicast scheme enhances performances in vewpoints of DRP reservation conflict and throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2697-2702
• /
• 2014

In this paper, we demonstrated a Ku-band 2W MMIC power amplifier for satellite communication applications. The device technology used relies on $0.25{\mu}m$ GaAs pseudomorphic high electron mobility transistor (PHEMT) of Wireless Information Networking (WIN) Semiconductor foundry. The 2W MMIC power amplifier has gain of over 29 dB and saturation output power of over 33.4 dBm in the frequency range of 13.75 ~ 14.5 GHz. Power added efficiency (PAE) is a 29 %. To our knowledge, this is the highest power added efficiency reported for any commercial GaAs-based 2W MMIC power amplifier in the Ku-band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.455-468
• /
• 2014

This paper presents seamless hand off implementation suggesting algorithm and Measuring /testing at the tunnel environment in order to derive the ideal value of wireless data transmission in RF-CBTC train control system modeled by Shinbundang Operation System. In addition, it proposes the ideal value(-57dB) for reducing the re-transmission or frequency interference rate and demonstrates frequency optimization which enables highly reliable data communication in Train control system using wireless communications. Based on these result, Shinbundang phase 2 plan to apply to this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1316-1322
• /
• 2004

Recently, the UWB (ultra wide-band) wireless communication technology, which provides high data transmission and is capable of linearly trading between throughput and signal-to-noise ratio (SNR), has drawn much attention for short-range wireless networks. Fully exploiting its notable features and minimizing its interference to coexisting other systems require the knowledge of SNR's at receivers In this paper, we propose an algorithm for estimating the pulse energy to noise ratio Ep/No of UWB signal with utilization of outputs from a correlator at a receiver, and evaluate the performance of the proposed algorithm through computer simulation. According to simulation results, the maximum standard deviation is about 1 13 dB with a block size of 500. Except for Ep/No=O and 2 dB cases with a block size of 500, no errors greater than 3 dB were observed in all the remaining experiments. Generally speaking, it improves as the true Ep/No, increases and as the block size increases A notable feature of the proposed algorithm is that it does not reduce the effective throughput because the estimation process does not require sending additional training signal of any specific format.