• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3332-3339
• /
• 1999

TCP protocol is originally designed for the wired network in which the packet loss in mostly caused the network congestion, and thus the performance of protocol can be decreased in mobile Internet environment due to the comparatively high error rate of wireless link. This paper analyzes the influence of retransmission interference that is a major factor to the TCP performance decrease. We first build a model in order to simulate the mobile Internet environment that includes the wireless network, and then we implement a program using PARSEC simulation language and finally executed the program. Based on the simulation results, we suggest a method that reduce the effect of the retransmission interference.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2013

Wearable computer systems use the wireless universal serial bus (WUSB), which refers to USB technology that is merged with WiMedia physical layer and medium access control layer (PHY/MAC) technical specifications. WUSB can be applied to wireless personal area network (WPAN) applications as well as wired USB applications such as PAN. WUSB specifications have defined high-speed connections between a WUSB host and WUSB devices for compatibility with USB 2.0 specifications. In this paper, we focus on an integrated system with a WUSB over an IEEE 802.15.6 wireless body area network (WBAN) for wireless wearable computer systems. Due to the portable and wearable nature of wearable computer systems, the WUSB over IEEE 802.15.6 hierarchical medium access control (MAC) protocol has to support power saving operations and integrate WUSB transactions with WBAN traffic efficiently. In this paper, we propose a low-power hibernation technique (LHT) for WUSB over IEEE 802.15.6 hierarchical MAC to improve its energy efficiency. Simulation results show that the LHT also integrates WUSB transactions and WBAN traffic efficiently while it achieves high energy efficiency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1063-1068
• /
• 2022

The modern society has become entry into the information age after the spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, performance and speed of 2.4 and 5GHz band for Wi-Fi which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 6GHz band for Wi-Fi 6E came to be interested. In this paper, we studied the design and fabrication of microstrip patch antenna to be used in wireless communication systems operating at around 6GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, slot microstrip patch antenna is fabricated using FR-4 of dielectric constant 4.4. The characteristics of fabricated patch type microstrip antenna were analyzed by network analyzer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.916-924
• /
• 2003

Fair queueing has been an important issue in the multimedia networks where resources are shared among nodes both wired and wireless. In most fair queuing algorithms, based on the generalized processor sharing(GPS), emphasizes fairness guarantee while overlooking bounded delay guarantee which is critical to support multimedia services in the networks. In this paper, we propose a new fair queueing scheme, delay guaranteed fair queueing (DGFQ), which guaranteeing bounded delay of flows according to their individual delay requirements for multimedia services in the wireless packet networks.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1206-1218
• /
• 2016

This article proposes a highly reliable power and communication system that guarantees the protection of essential instruments in a nuclear power plant under a severe accident. Both power and communication lines are established with not only conventional wired channels, but also the proposed wireless channels for emergency reserve. An inductive power transfer system is selected due to its robust power transfer characteristics under high temperature, high pressure, and highly humid environments with a large amount of scattered debris after a severe accident. A thermal insulation box and a glass-fiber reinforced plastic box are proposed to protect the essential instruments, including vulnerable electronic circuits, from extremely high temperatures of up to $627^{\circ}C$ and pressure of up to 5 bar. The proposed wireless power and communication system is experimentally verified by an inductive power transfer system prototype having a dipole coil structure and prototype Zigbee modules over a 7-m distance, where both the thermal insulation box and the glass-fiber reinforced plastic box are fabricated and tested using a high-temperature chamber. Moreover, an experiment on the effects of a high radiation environment on various electronic devices is conducted based on the radiation test having a maximum accumulated dose of 27 Mrad.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2024

The modern society has become full-fledged entry into the information age since spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4GHz band which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 5GHz band came to be interested. In this paper, we studied the design and fabrication of u-slot microstrip patch antenna to be used in wireless communication systems operating at around 5GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, u-slot microstrip antenna is fabricated using FR-4 substrate of dielectric constant 4.4. The characteristics of fabricated antenna were analyzed by network analyzer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.102-113
• /
• 2014

Present communication and network environment have been moving rapidly toward wireless and mobile base from existing wired internet base. This change of trend influences greatly on business methods accordingly. Therefore many enterprises are trying hard to adopt mobile business in order to gain competitive edge of their products and they are in need of more effective and stable mobile solutions. However, the method of establishing optimal mobile computing environment and how to handle existing business process and use vast amount of database are still needed. Therefore this paper tries to realize a mobile middleware system as a mobile business establishment supporting tool that could link various computational resource on wired internet with wireless LAN, mobile phone network, and mobile devices. To accomplish that specific goal, this paper provides a powerful tool of mobile and wireless application data access that could expand the line of business already set up in general enterprises easily and rapidly into mobile environment. When this suggested solution is applied in the field of industry, it can economically change legacy business process into mobile environment without having to change existing logic and resources at all.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.548-553
• /
• 2004

Due to the recent advance in wireless communication technology, it is now more demanding to enjoy the high quality of service in the wireless Internal. TCP, which many Internet applications depend on for the end-to-end transport service, is optimized for the wired environment. Consequently, TCP suffers from severe performance degradation in the wireless environment where the bit error rate is relatively high and the burst errors frequently take place. In this paper, we propose a Robust TCP algorithm, which can effectively react against the burst error and significantly improve the TCP performance in wireless Internet. It is shown through the simulations that the Robust TCP performs well in the wireless environment, especially under the burst error condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2006-2013
• /
• 2015

In this paper we propose a multi-protocol gateway system based on low power wireless communications. The proposed multi-protocol gateway system was designed to allow real-time monitoring and control of the on-site situation through wired and wireless networks by gathering information for streetlight power control and environmental monitoring. The sensing data using multi-sensors with composite processing that selectively used wired or wireless communication (e.g., CDMA, Ethernet (TCP/IP), GPS, etc.) were designed to act as intermediaries that transmitted to the main server through ZigBee. Inaddition, they were designed by separating a CPU board and baseboard to ensure low maintenance cost and ease of hardware replacement. The proposed multi-protocol gateway system's power, impact, continuous operation stability, and immunity test results obtained a normal operation success rate of over 95% and normal continuous operation results. Moreover, in the voltage drop test, instantaneous immunity test, and conductive RF electromagnetic field immunity test, it obtained an average rating result of "A".