• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.261-268
• /
• 2008

STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair $acrylic^{(R)}$ and Super-$Bond^{(R)}$ C&$B^{(R)}$ and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block ($Lucitone^{(R)}$199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at $4^{\circ}C$ and $60^{\circ}C$ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&$B^{(R)}$ showed superior dislodging force than Jet denture repair $acrylic^{(R)}$. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&$B^{(R)}$ as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&$B^{(R)}$ was significantly higher than Jet denture repair $acrylic^{(R)}$. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.

• 한국항공우주학회지
• /
• 제41권5호
• /
• pp.342-349
• /
• 2013

무인항공기가 외형손상을 입는 경우, 비행역학 특성이 변하기 때문에 손상 이전 설계된 제어기는 더 이상 안정적인 제어성능을 보장하지 않는다. 본 논문에서는 주익의 손상이 일어난 무인항공기에 대해서도 강건한 제어성능을 보장하는 신경회로망 적응제어기법을 소개한다. 구동기의 특성에 의한 제어기의 성능저하를 방지하기 위해 Pseudo Control Hedging (PCH)를 추가적으로 사용하였다. 기체고정좌표계의 중심이 항공기의 무게중심에 위치하지 않는 비대칭 동역학을 사용하였으며, 전익형 무인기를 대상 비행체로 하였다. 날개가 손상되지 않은 모델과 손상된 모델의 풍동시험을 통해 얻은 공력데이터를 이용하여 시뮬레이션을 수행하였다. 시뮬레이션의 결과를 통해 제안된 제어기법이 주익의 손상이 발생한 항공기에 대해서도 여전히 안정적인 조종성능을 보장하는 제어기법임을 검증하였다.

• 한국전산구조공학회논문집
• /
• 제30권5호
• /
• pp.445-452
• /
• 2017

본 연구에서의 날개 앞전은 날개의 공기역학적인 기능뿐만 아니라 조류 등의 외부의 손상을 줄 수 있는 것으로부터 날개 내부 구성요소를 보호하고 안전한 항공기 운항을 위한 반드시 필요한 구조 요소이다. 복합재 무인기의 날개 경량화를 위한 최적의 제작 모델을 비교 검토하였다. MSC. Patran/Nastran을 이용한 유한요소해석을 통하여 비틀림 하중의 변위 형상을 비교 확인하였으며, 각 모델들의 비틀림 강도 실험을 통하여 적층 유형, 두께 변화 및 형상 적용에 따른 경량화 성능 개선을 확인하므로써 소형 복합재 무인기 최적의 경량화 날개 앞전스킨의 형태를 제시하였다.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.467-474
• /
• 2012

무인항공기의 정찰 및 정보 수집 능력을 효율적으로 수행하기 위해 장기 체공 능력이 요구된다. 분산 추진 장치는 대형 추진 장치를 복수의 소형 추진 장치들로 대체하여 추력을 얻는 장치이다. 날개의 스팬 길이를 따라 넓게 분포하여 효율이 증가하며, 유동의 흡입을 통해 경계층을 제어하고 출구에서 분사되는 흐름이 항공기에 부착되어 흐르기 때문에 양항비가 증가한다. 본 연구에서는 전익기 융합익기와 분산 추진 장치가 장기 체공 성능을 향상시키는 점에 착안하여 연구를 수행하였다. Eppler 337 에어포일 유닛에 추진 장치의 위치 및 입 출구 가로세로비 변화에 따라 나타나는 공력특성을 분석했다. CFD를 사용하여 공력해석을 수행하였고, 빠른 해석 결과를 얻을 수 있도록 팬 영역에 작동판 이론을 적용하였다. 양항비와 모멘트 비교를 통해 추진 장치의 위치 및 형상을 결정하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.697-702
• /
• 1997

This study presents test results of RC beams strengthened by carbon fiber sheet (CFS) or carbon fiber reinforced plastics (CFRP) for increasing shear resistance. Fifteen specimens were tested, and the test was performed with different parameters including the type of strengthening materials (CFS, CFRP), shear-strengthening methods (wing type, jacket type, strip type), strip-spacing, strengthening direction of FRP. The results show that shear-damaged RC beams strengthened by either CFS or CFRP have more improved the shear capacity.

• 부모자녀건강학회지
• /
• 제8권2호
• /
• pp.168-181
• /
• 2005

The purpose of this study was to examine the Enneagram personality types of nursing students. Data were collected through self-reported questionnaires from 225 nursing students living in D city from 14, November to 17, November in 2005. The data collected were analyzed using frequency, percent with SPSS. The findings of this study were as follows : In the nine Enneagram personality types, type 9 was highly measured and the next order was type 1, 4, 7, 2, 8, 6, 5, 3. In the triadic center of Enneagram personality types, gut type was highly measured. The next order was heart type and head type. In the wing, 9W1 was highly measured and the next order was 1W9 and 'both wing is equal'. In the disruption and integration, the disruption rather than integration was highly measured. In the disruption and integration according to personality types, the integration rather than disruption was highly measured in type 2, 6, 1. In the disruption and integration according to triadic center, the disruption was highly measured in gut type and the integration was highly measured in heart type and head type. The most development level was level 5. The next order was level 6, 4, 7, 3. There was no one present in level 1, 2, 8, 9. The results of this study suggest that there is need of individual guide considering Enneagram personality types in nursing students. We need to develop various group counseling program related to Enneagram personality types.

• 조명전기설비학회논문지
• /
• 제13권3호
• /
• pp.1-6
• /
• 1999

형광등용 조명기구에 사용되는 경명 반사판의 광학 설계 프로그램을 개발하였다. 이 프로그램은 조명기구 설계시간을 단축시킨다. SpeROD(Specular Reflector Optical Designer)는 2차원적인 조건들을 가지고 계산한다. 반사판 설계를 위해 고려되는 조건들은 목표배광, 반사판 그리고 Tangent Spiral Design 방법등이 있다. 본 논문에서는 SpeROD를 이용하여 지름 26mm(T8)의 형광램프와 폭 150mm의 반사판을 가지는 균일 배광 형태와 Bat-wing 배광형태의 반사판을 설계해보았다. 설계된 반사판의 형태에 대하여 배광에측 프로그램인 FIELD를 통하여 배광을 시뮬레이션 해 본 결과, 배광과 효율 면에서 만족스러운 결과를 얻었다.

• 대한수학회보
• /
• 제49권6호
• /
• pp.1263-1274
• /
• 2012

In the present paper we establish some new Opial-type inequalities involving higher order partial derivatives. The results in special cases yield some of the recent results on Opial's inequality and provide new estimates on inequalities of this type.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.220-223
• /
• 2006

The COMS(Communication, Ocean and Meteorological Satellite) EPS(Electrical Power Subsystem) is derived from an enhanced Eurostar 3000 EPS which is fully autonomous operation in normal conditions or in the event of a failure and provides a high level of reconfiguration capability and flexibility. This paper introduces the COMS EPS preliminary design result. The COMS EPS consists of a battery, a solar array wing, a PSR(Power Supply Regulator), a PRU(Pyrotechnic Unit), a SADM(Solar Array Drive Mechanism) and relay and fuse brackets. This can offer a bus power capability of 3 kW. The solar array is made of a deployable wing with two panels. One type of solar cells is selected as GaAs/Ge triple junction cells. Li-ion battery is base lined with ten series cell module of five cells in parallel. PSR associated with battery and solar array generates a power bus fully regulated 50 V. Power bus is centralised protection and distribution by relay and fuse brackets. PRU provides power for firing actuators devices. The solar array wing is routed by the SADM under control of the AOCS(Attitude Orbit Control Subsystem). The control and monitoring of the EPS especially of the battery, is performed by the PSR in combination with on-board software.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.37-44
• /
• 2017

In this study, in order to prevent cavitation in a variable swash-plate type hydraulic pump, a basic model impeller has been applied to a new pump, and the impeller shape has been optimized through flow analysis. Based on the analysis results, we could propose an impeller shape with high efficiency and low possibility of cavitation in comparison with the basic model. The simplification of the basic shape of the impeller of the hydraulic pump was performed in three parts in the order of hub shape, wing, and curvature, and eight design parameters were defined to satisfy the design requirement. Compared with the initial model of the impeller, when the differential pressure of the optimum model increased, the efficiency was improved. It achieved the goal of design improvement because cavitation did not occur under the rated operating conditions.