• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2002

In order to examine the directional suitability of the axis direction of the fishing gear against the current, the experiments were carried out at the bamboo weir in Samchunpo water area from January, 2000 to September, 2001 The results of the study are as follows: In the experimental fishing gear constructed in the "V" shape, the range between two reference piles located at the entrance was 2.5m. The direction of bamboo weir′s axis was 355.5$^{\circ}$ The length of the left wing and those from the reference pile to the starting point of a curve were 106.0m, 7.5m, respectively. The length of the right wing and those from the reference pile to the starting point of a curve were 79.0m, 10.0m, respectively. Depths around the left and right stone wall that drove the steel pile were 5.0~6.5m and 6.5~9.5m, respectively. Also, depths on the bamboo weir′s axis and around the sack were 7.0~8.0m and about 8.0m, respectively. The maximum height of stone walls at the point of the left wing, the right wing and around the sack on the bamboo weir\` axis were 3.0m, 4.7m and 4.0m, respectively, Widths of stone walls at the point of both of the wings and around the sack on the bamboo weir\`s axis were 10.0~l4.0m, 22.0~25.0m, respectively. The averaging current direction on ebb tide was measured two times and it was 169.2$^{\circ}$ but the direction had about a 6.3$^{\circ}$ difference from the bamboo weirs axis. The maximum current speed appeared two to three hours later from the time of high tide and the current speed over 80.0cm/s lasted during about two Hours on the ebb tide In the case of a straight type wing In the bamboo weir, the eddy out of the left wing was comparatively big and the current on the right side from the bamboo weir′s axis had a tendency in turning to the right wing side. But in the case of a curve type wing, the eddy and tendency reduced significantly. It was thought that the experimental fishing gear was set suitably from the result of this simulation.

• Journal of the Korean housing association
• /
• v.8 no.2
• /
• pp.1-15
• /
• 1997

This study is purpose to analyze and adjust structure and composition methodology for Loft of korean traditional houses and than studying correlation about housing plan, according to middle-story structure like Loft form housing architecture. The Loft is composited to level by condition of location, using a rise of stair by expanding of span by function. We can divide to condition of location flatland and slant. In the flatland case, Loft is so heating that the kitchen floor make a lowly and in the slant case, Loft is composited a part of wing using height attitude of floor when the house build type and ㅁ type. Through this study. the Loft is various form of this structural forming then is affect the house facade. The composite of wall is come with the existence of Loft and the wall divided by the lintel and wall line.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.7
• /
• pp.536-541
• /
• 2008

The Flow characteristics of a ship's propulsion mechanism of Weis-Fogh type, in which a airfoil(NACA0010) moves reciprocally in a channel, were investigated by the PIV. Velocity vectors and velocity profiles around the operating and stationary wings were observed at opening angles of ${\alpha}=15^{\circ}$ and $30^{\circ}$, velocity ratios of $V/U=0.5{\sim}1.5$ and Reynolds number of $Re=0.52{\times}104{\sim}1.0{\times}104$. As the results the fluid between wing and wall was inhaled in the opening stage and was jet in the closing stage. The wing in the translating stage accelerated the fluid in the channel. And the flow fields of this propulsion mechanism were unsteady and complex, but those were clarified by flow visualization using the PIV.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.7
• /
• pp.1036-1043
• /
• 2008

The Flow fields of a ship's propulsion mechanism of Weis-Fogh type were investigated by the PIV. Velocity vectors and velocity profiles around the operating and stationary wings were observed at opening angles of ${\alpha}=15^{\circ} and $30^{\circ}$, velocity ratios of V/U=$0.5{\sim}1.5$ and Reynolds number of Re=$0.52{\times}10^4{\sim}1.0{\times}10^4$. As the results the fluid between wing and wall was inhaled in the opening stage and was jet in the closing stage. The wing in the translating stage accelerated the fluid in the channel. And the flow fields of this propulsion mechanism were unsteady and complex, but those were clarified by flow visualization using the PIV.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.783-786
• /
• 2002

The unsteady turbulent flow characteristics of NACA4406 airfoil at close proximity to the pound are numerically investigated, especially focused on the noise generation mechanism near the blunt trailing edge. The unsteady two-dimensional compressible Wavier-Stokes equations with a Spalart-Allmaras turbulence closure model are solved by the 6th-order compact scheme and the 4th-order Runge-Kutta scheme. The computation shows a noise generation by a feedback mechanism at the blunt tailing edge, where the acoustic-fluidic coupling occurs between the wall-reflected sound waves and the periodically disturbed turbulent shear layer.

• Journal of the Korean housing association
• /
• v.4 no.1
• /
• pp.5-16
• /
• 1993

This paper tries to find out the characteristics of the vernacular dwellings in Noksan area which has been a part of Kaya cultural realm. Through the analyses of its environments and several practical unit plans. The characteristic of the vernacular dwellings in thes arer are as below. The dwellings has been transfigured form [Omaksari] hut which is generally the smallest house form in Korea. The noticeable vernacular hut in this area is smallest 4-kan double-wing plan which is irregular 전 shape, but they call it single wing and 2-kan plan. Leed which can be obtained easily in thes area is used on roof and in wall. Timbers used in constrution are very slim or rather weak, but they were treated carafully. The chimney form in this area seems the results of minimizing of their being from the invasion of Japanese pirate, but also it seems an effective method of heat control. In conclusion, we cannot deny that the house form of this area seems affected by its exclusive natural and social environments.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.384-391
• /
• 2001

The aerodynamic effects of a 3-dimensional Wing in Ground Effect (WIG) which moves above the free surface has been numerically investigated via finite difference techniques. The air flow field around a WIG is analyzed by a Marker & Cell (MAC) based method, and the interactions between WIG and the free surface are studied by the pressure distributions on the free surface. Waves are generated by the surface pressure distribution, and a Navier-Stokes solver has been employed, to include the nonlinearities in the free surface conditions. The pressure values Cp and lift/drag ratio are reviewed by changing the height/chord ratio. In the present computations a NACA0012 airfoil with a span/chord ratio of 3.0 are treated. Through computational results, it is confirmed that the free surface can be treated as a rigid wavy wall.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2039-2046
• /
• 2003

Storage tank filled with fluid has unique dynamic characteristics compared to general structures, due to the interaction between fluid and structure. The oscillation of the fluid surface caused by external forces is called sloshing, which occurs in moving vehicles with contained liquid masses, such as trucks, railroad cars, aircrafts, and liquid missles. In this study, the evaluation method for the reduction of sloshing, the optimized size and location of wing and diaphragm baffles are suggested based on the experimental results. The experimental device can simulate the translation motion. A rectangular tank and various baffles are fabricated to study on the sloshing characteristics. The forces measured using the load cell at tank wall and those are compared with each other through the Fourier transformation for various conditions. The study of the sloshing of the rectangular tank equipped with baffles is conducted under the same conditions with non-baffled rectangular tank experiment. From the experimental results, the sloshing reduction effect by the baffles is observed. In conclusion in case of diaphragm baffles, the optimized size ratio of the width of baffle to the water height is 0.44 and the installation location has no effect to the damping of sloshing. In case of wing baffles, the optimized size ratio of the width of baffle to the length of a rectangular tank is 0.1 and the optimized location ratio of the baffle to the water height is 0.9.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.11-22
• /
• 2001

The interaction between forward mounted propeller and wing in ground effect, and its aerodynamic performance are analyzed by potential flow approximation. A Vortex Lattice Method(VLM) for the propeller analysis and a potential based panel method for the WIG are used together with an image method by assuming the free surface as a rigid wall. The interaction of propeller and wing in the proximity of the ground is taken into account by an iterative procedure where the boundary conditions are satisfied with the given convergence criteria. The program developed is first checked by comparing its numerical results with the experimental data and other numerical results for the propeller MP101-rudder MR21 system. Then, the propeller-WIG interaction and its performance versus ground clearance are investigated by changing parameters such as propeller position, diameter and speed of revolution. It is shown that the forward mounted propeller increases the lift forces of the wing and also enhances the height stability, depending on the design parameter. Therefore, the appropriate selection of the design parameter such as propeller diameter, revolution, the longitudinal and vertical position of propeller is necessary.