• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.13-24
• /
• 2003

MPEG-4 is a standard for multimedia applications and provides a set of technologies to satisfy the needs of authors, service providers and end users alike. In this paper, we suggest a Real-time Multiple Circular Buffer (M4RM Buffer) model, which is suitable for streaming these MPEG-4 contents efficiently. M4RM buffer generates each structure of the buffer, which matches well with each object composing an MPEG-4 content, according to the transferred information, and manipulates multiple read/write operations only by its reference. It divides the decoder buffer and the composition buffer, which are described in the standard, by the unit of frame allocated to minimize the range of access. This buffer unit of a frame is allocated according to the object description. Also, it processes the objects synchronization within the buffer and provides APIs for an efficient buffer management to process the real-time user events. Based on the performance evaluation, we show that M4RM buffer model decreases the waiting time in a buffer frame, and so allows the real-time streaming of an MPEG-4 content using the smaller size of the memory block than IM1-2D and Window Media Player.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.19-23
• /
• 2007

The NiSi is very promising candidate for the metallization in 45 nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25\;{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5\;{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process temperature window for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5\;{\Omega}/{\square}$ and $3\;{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.90-102
• /
• 2011

Recently, the grade of users using wireless communication services which transmits and re-transmits to the signal via the broadcasting satellite have a variety. However the ships not preparing of H.264 standard devices should not received the realtime data because the broadcasting stations have transmitted the compressed video data through the satellite communication. Therefore this paper proposes H.264 to MPEG-2 transcoding for the ships using MPEG-2 devices. Proposed method improves a speed and object quality in H.264 to MPEG-2 transcoding by analysis features of macroblock modes in H.264. In the Intra mode of P-frame, it proposes new method by computing coincidence proportion after comparing of Intra mode methods of H.264 and MPEG-2. In the Inter mode, it proposes a PMV(predictive motion vector) considering movement of motion vectors in H.264 decoder. we reuses a PMV directly as like the final MV in MPEG-2 encoder and refinements the MV after coincidence ratio comparing of variable motion vectors of H.264 and these of MPEG-2. The experimental results from proposed method show a considerable reduction in processing time, as much as 70% and 67% respectively, with a small objective quality reduction in PSNR.

• Annals of Clinical Neurophysiology
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2016

Background: Moyamoya disease is characterized by a progressive stenosis or occlusion of the intracranial internal carotid artery and/or the proximal portion of the anterior cerebral artery and middle cerebral artery. Whether the onset time was childhood or adulthood, the bony carotid canal diameter might be different, but reflects the size of internal carotid artery passing through the bony carotid canal. In this study, we aimed to identify the relationship between bony carotid canal diameter and clinical manifestation. Methods: 146 consecutive patients diagnosed with moyamoya disease by brain imaging studies were included. We measured the diameter of a transverse portion of bony carotid canal on bone window of a brain computed tomography(CT) image. Patients were divided into two groups, ischemic or hemorrhagic stroke according to clinical manifestation. As a result, 115 patients were included. The Suzuki stage was used as criteria for disease progression. Results: Bony carotid canal diameter was $3.6{\pm}0.5$ (right) and $3.6{\pm}0.4$ (left) in the hemorrhagic stroke group, and $3.7{\pm}0.4$ (right) and $3.6{\pm}0.4$ (left) in the ischemic stroke group. The bony carotid canal diameter of the moyamoya vessels (3.6 mm) was smaller than the diameter of non-moyamoya vessels (3.8 mm), significantly (p = 0.042). However, there was no difference in the collateral patterns and clinical manifestation in a comparison of both groups. Conclusions: In our study, there was no significant difference of clinical manifestations and collateral patterns depend on the bony carotid canal diameter in patients with moyamoya disease. These findings suggest that the clinical presentations of moyamoya disease are not related to the onset time of the disease.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.753-759
• /
• 2011

Protected crop production has been popular in Korea as well as in other countries. Intensive and continuous monitoring and control of the environment, which is labor- and time-consuming, is critical for stable crop productivity and profitability, otherwise damage could be happened due to unfavorable ambient and soil conditions. In the study, potential utilization of smartphone and remote access application in protected crop production environment was investigated. Tested available remote access applications provided functions of mouse click (left and right buttons), zooming in and out, and screen size and color resolution control. Wi-Fi data communication speeds were affected by signal intensity and user place. Data speeds at high (> -55 dBm), medium (-70~-56 dBm), and low (< -71 dBm) signal intensity levels were statistically different (${\alpha}=0.05$). Means of data communication speed were 6.642, 4.923, and 2.906 Mbps at hot spot, home, and office, respectively, and the differences were significant at a 0.05 level. Smart phone and remote access application were applied successfully to remote monitoring (inside temperature and humidity, and outside precipitation, temperature, and humidity) and control (window and light on/off) of green house environment. Response times for monitoring and control were less than 1 s at all places for high signal intensity (> -55 dBm), but they were increased to 1 ~ 10 s at home and office and to 10 ~ 30 s at hot spot for low signal intensity (< -71 dBm) for Wi-Fi. Results of the study would provide useful information for farmers to apply these techniques for their crop production.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.648-662
• /
• 2004

These days fashion market is overflown with many brands and their identities are not so clear that the advertisement emphasizing the characteristics of the products don＇t seem to be adequate in appealing the customers. Therefore it is required that the sensible image advertisement which appeals to the customers by stimulating their feeling and sensitivity to attract customer＇s interest. At that point, VMD especially of POP advertisement that can be attract direct purchasing plays an important part to build up the accurate image of brand to consumers. Even thought today＇s individualized consumers take much interested in the fresh and original expressions, the visual expressions of fashion advertisements still focus on using photographs. The most advertisement of photograph has a limit that it shows only an immediate fraction, so it can＇t present whole image It can deliver more- imaginations and message than photograph if fashion illustration is used in advertisement. Therefore the purpose of this study was to present the application of fashion illustration for the POP advertisement Twelve pieces of fashion illustrations were produced and classified three parts according to their images and expression techniques. Paper sculpture techniques were applied for fashion image expression, for paper is easily meet daily life and ecological materials. For study procedure and contents, the concept and useful functions of fashion illustration and the concept of paper sculpture were examined as a theoretical background, and various uses and techniques of paper sculpture by analysing a number of paper sculpture art works were also studied. Also the concept, roles and functions of POP advertisement were discussed, and then the examples that the fashion illustration applied in the advertisement were analyzed through case study. The theme of my works was jean fashion brand whose brand image is significant, Twelve pieces of fashion illustrations using paper sculpture techniques were produced and various kinds of paper were used in expressing the paper sculpture technique. Each works were cut out the forms and used a pertinent light for making cubic effect shadow when displayed them. In my works Ⅰand Ⅱ, Ⅰ illustrated jeans in two images of sexy and casual, these were created slightly bigger than actual body size in order to attract consumer＇s gaze at show window or store. In my works Ⅲ, Ⅰ illustrated part or model of a jean product so that it could be used as addition to main display.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2715-2720
• /
• 2014

Median filtering is very effective to remove impulse type noises, so it has been widely used in many signal processing applications. However, due to the time complexity of its non-linearity, median filtering is often used using a small filter window size. A lot of work has been done on devising fast median filtering algorithms, but most of them can be efficiently applied to input data with finite integer values like images. Little work has been carried out on fast 2-d median filtering algorithms that can deal with real-valued 2-d data. In this paper, a fast and simple median 2-d filter is presented, and its performance is compared with the Matlab's 2-d median filter and a heap-based 2-d median filter. The proposed algorithm is shown to be much faster than the Matlab's 2-d median filter and consistently faster than the heap-based algorithm that is much more complicated than the proposed one. Also, a more efficient median filtering scheme for 2-d real valued data with a finite range of values is presented that uses higher-bit integer 2-d median filtering with negligible quantization errors.