• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.29-35
• /
• 2024

TCP is considered as one of the major candidate transport protocols even for constrained IoT networks..In our previous work, we investigated the congestion control mechanism of the uIP TCP. Since the uIP TCP sets the window size to one segment by default, managing the retransmission timer is the primary approach to congestion control. However, the original uIP TCP sets the retransmission timer based on the fixed RTO, it performs poorly when a radio duty cycling mechanism is enabled and the hidden terminal problem is severe. In our previous work, we proposed a TCP retransmission timer adjustment scheme for uIP TCP which adopts the notion of weak RTT estimation of CoCoA, exponential backoffs with variable limits, and dithering. Although our previous work showed that the proposed retransmission timer adjustment scheme can improve performance, we observe that the scheme often causes a node to set the retransmission timer for an excessively too long time period. In this work, we show that slightly modifying the dithering mechanism of the previous scheme is effective for improving TCP fairness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.153-158
• /
• 1991

Recently, demands on light weight, high strength, and low noise or vibration have led to the design of complicated structural systems. Although finite elements [1], mode synthesis [2], and statistical energy analysis [3] can be used to compute the dynamic response of such systems, the structural complexity has made the interpretation of the results of such analysis difficult. Many researchers in dynamic analysis have sought to further develop existing theories or develop alternate methods to obtain greater insight in the behavior of large massive primary systems (P systems) with connected light secondary systems (S systems). Some recent research includes work by Sackman and Kelly [4], Sackman et al.[5], Der Kiureghian et al.[6], and Igusa and Der Kiureghian [7-9] who have combined mode synthesis concepts, matrix algebraic theory, and perturbation methods for characterizing weakly-coupled structural systems. A major limitation of these works are that they are limited to lumped mass S systems. In this paper, the general ideas in the Refs.[4-9] are used to study continuous S systems and the method to reduce the complexity, studied in the works by Igusa, Achenbach, and Min [10,11], is developed into the frequency window method.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.327-350
• /
• 2007

A single window platform must be successfully established by implementing CDM/UCR in WCO and UNeDocs in UN/CEFACT, which is part of the framework of standards for secure and facilitate global trade. Core success factors in single window platform for international trade depend on political innovative capacity, advanced leadership of high ranking officials and departments in charge, effective collaborations between the ministries and offices concerned which are supported by supreme executives, self-controlled coordinations between users, convenience and access availability to users, promotion and marketing, identification on predictive impediments, financial raising and revenue model payable, communication's strategy, valid legal basis etc. To settle a stable ubiquitous e-trade platform, firstly, procedures and practices of customs clearance which different from one another mutually must be standardized globally. Secondly, the international standard electronic data exchanges must be introduced to facilitate and simplify customs clearing procedures by holding administrative informations in common between public institutions. thirdly, cooperative work model must be accepted with enhancing outsourcing business between reference groups (export-import firms and IT service providers).

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.412-418
• /
• 2010

This paper proposes a new algorithm to generate a reference signal for an active power filter using a sliding-window FFT operation to improve the steady-state performance of the active power filter. In the proposed algorithm the sliding-window FFT operation is applied to the load current to generate the reference value for the compensating current. The magnitude and phase-angle for each order of harmonics are respectively averaged for 14 periods. Furthermore, the phase-angle delay for each order of harmonics passing through the controller is corrected in advance to improve the compensation performance. The steady-state and transient performance of the proposed algorithm was verified through computer simulations and experimental work with a hardware prototype. A single-phase active power filter with the proposed algorithm can offer a reduction in THD from 75% to 4% when it is applied to a non-linear load composed of a diode bridge and a RC circuit. The active power filter with the proposed reference generation method shows accurate harmonic compensation performance compared with previously developed methods, in which the THD of source current is higher than 5%.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.43-58
• /
• 1998

Packet switch is a key component in high speed digital networks. This paper investigates congestion phenomena in the packet switching with input buffers. For large value of switch size N, mathematical models have been developed to analyze asymptotic maximum switch throughput under nonuniform traffic. Simulation study has also been done for small values of finite N. The rapid convergence of the switch performance with finite switch size to asymptotic solutions implies that asymptotic analytical solutions approximate very closely to maximum throughputs for reasonably large but finite N. Numerical examples show that non-uniformity in traffic pattern could result in serious degradation in packet switch performance, while the maximum switch throughput is 0.586 when the traffic load is uniform over the output trunks. Window scheduling policy seems to work only when the traffic is relatively uniformly distributed. As traffic non-uniformity increases, the effect of window size on throughput is getting mediocre.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.911-913
• /
• 2008

In this work, nonvolatile memory (NVM) devices for system on panel of flat panel display (FPD) were fabricated using low temperature polycrystalline silicon (LTPS) thin film transistor (TFT) technology with an oxide-nitride-oxynitride (ONOn) stack structure on glass. The results demonstrate that the NVM devices fabricated using the ONOn stack structure on glass have suitable switching characteristics for data storage with a low operating voltage, a threshold voltage window of more than 1.8 V between the programming and erasing (P/E) states after 10 years and its initial threshold voltage window (${\Delta}V_{TH}$) after $10^5$ P/E cycles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.949-957
• /
• 2005

In this paper, the performances of a single-user DS-UWB system applying two simple proposed channel estimation schemes are introduced, according to the newly updated DS-UWB PHY Layer standard from IEEE P802.15.3a. The performances of error control coding, different combining schemes in selective Rake receiver for DS-UWB system are analyzed. Both of the two channel estimation schemes using data-independent structure work well in DS-UWB system with few pilot bits. For the purpose of channel estimation and reduces the number of pilot bits, we apply a pilot symbol spreaded with $2{^8}-1\;or\;2{^9}-1$ periods of m-sequence for different channel estimation schemes.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.133-138
• /
• 2005

This study is about the description method & scope of maintenability in window components which have been applied to the remodelling work in Apartment Housing. Already we did established the maintenability performance index through the preceding research in recent. It is defined as changeability, prefabrication, coordination. and capacity of performance preservation. As the results of analysys on the performance information that is reported by catalog & internet media, the ratio of adaptation as a maintenabilty performance was revealed to percentage of 11(11%). And as the respects of represented content, majority of the performance information only have dealt with advertising-effect, rather than physical performance make easy to change and separat.