• 한국건축시공학회지
• /
• 제11권5호
• /
• pp.482-500
• /
• 2011

In apartment housing construction, window frame installation work, which is conducted after the structural framework, is very important, because its completion time directly affects the starting time of successive interior finishing works, as well as the overall construction period. Construction delays in interior finishing works might occur due to problems inherent to the conventional window frame installation method, such as the poor verticality of window frames, and the water leakage around them. The primary objective of this study is to analyze the problems of a 'Gangform integrated PVC window frame pre-installation method' based on its pilot test results. Next, this study proposes an improved conceptual model that enables the end users to enhance the field applicability of this method in terms of productivity, time, and cost. The field applicability of the proposed 'Gangform integrated PVC window frame pre-installation method' was also verified through a survey.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.103-110
• /
• 2011

The aim of this study was to analysis the Heating/cooling performance and Daylighting performance of Solar Window System built in apartments. the solar window is the idea to integrate daylight as a third form of solar energy into a PV/Solar Collector system. The process of this study is as follows: 1)Solar Window system was designed through the investigation of previous paper and work. 2)The simulation program(Lightscape3.2) was used in daylighting performance analysis. the reference model of simulation was made up to analysis daylighting performance on Solar Window system. 3)The simulation program(ESP-r, Therm5.0, Window6.0) was used in energy performance analysis. the reference model of simulation was made up to analysis energy and daylighting performance on Solar Window system. 4)The Size of Simulation model for daylighting and heating/cooling energy analysis was $148.5m^2$ 5)The lighting performance analysis was carried out with various variants, such as the size and installed area of Solar Window system. 6)Energy performance simulation was carried out with various variants, such as Integrated U-value of Solar Window system according to its position, installed angle and insulation thickness. Consequently, When Solar Window system is equipped with balcony window of Apartment, Annual heating and cooling energy of reference model was cut down at the average of $4.1kWh/m^2$ or 4.2%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4977-4996
• /
• 2016

The existence of excessively large and too filled network buffers, known as bufferbloat, has recently gained attention as a major performance problem for delay-sensitive applications. Researchers have made three types of suggestions to solve the bufferbloat problem. One is End to End (E2E) congestion control, second is deployment of Active Queue Management (AQM) techniques and third is the combination of above two. However, these solutions either seem impractical or could not obtain good bandwidth utilization. In this paper, we propose a Transmission Control Protocol（TCP）delayed window update mechanism which uses a congestion detection approach to predict the congestion level of networks. When detecting the network congestion is coming, a delayed window update control strategy is adopted to maintain good protocol performance. If the network is non-congested, the mechanism stops work and congestion window is updated based on the original protocol. The simulation experiments are conducted on both high bandwidth and long delay scenario and low bandwidth and short delay scenario. Experiment results show that TCP delayed window update mechanism can effectively improve the performance of the original protocol, decreasing packet losses and queuing delay while guaranteeing transmission efficiency of the whole network. In addition, it can perform good fairness and TCP friendliness.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.722-725
• /
• 2013

본 연구에서는 열처리를 하지 않은 소자와 열처리 소자의 기본 특성을 비교, 분석하고 온도에 따른 특성 변화를 확인하였다. 사용된 소자는 상부전극이 Pt/Ti(150nm), 하부전극은 Pt(150nm), 산화층은 $HfO_2$(70nm)이고, 열처리 온도는 $500^{\circ}C$, $850^{\circ}C$ 이다. 측정 소자 성능은 Set/Reset 전압, sensing window(저항상태 차이)다. 측정결과 세 종류의 소자의 기본 특성은 열처리별 온도가 높을수록 Set/Reset전압과 sensing window가 증가하였다. 온도에 따른 기본특성 분석 실험 결과 온도가 증가함에 따라 Set/Reset전압과 sensing window가 감소하였다. Set/Reset 전압의 온도에 따른 변화율은 $850^{\circ}C$ 열처리한 소자가 제일 작았고, sensing window의 변화율은 $500^{\circ}C$ 열처리 소자에서 가장 작은 변화율을 보였다. Set/Reset 전압의 변화율 과 sensing window를 고려했을 때 $500^{\circ}C$ 열처리 소자가 좋은 메모리 특성을 보였다.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2298-2305
• /
• 2010

The paper presents the Model Based Design(MBD) method which design and verify control algorithm for safety power window. Safety power window are required to work together with the anti-pinch function and have to meet FMVSS118 S5 requirements and equivalent ECC requirements. To meet the requirements, this paper presents the establishment of SILS and RCP environments. The design process can reduce time and support more performance-assured design. As a result of study, it met the regulations and achieved reaction force that close to common products.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.653-664
• /
• 2021

최근 에너지절약형 친환경주택의 건설기준 강화에 따라 고효율 주택의 수요가 증가하며, 창호공사의 비중이 함께 증가하고 있다. 창호는 사용빈도가 높고, 시공 시 특성에 따라 많은 하자가 발생할 가능성이 존재한다. 정부 기관이 공공임대주택에서 발생한 하자 민원을 조사한 바에 따르면, 접수된 민원 중 창호공사의 하자가 가장 높은 비중을 차지하고 있었다. 이에 따라 관련 선행연구를 고찰해보았고, 국내의 기존연구들은 창호공사의 시공 특성과 유지관리의 중요성을 반영한 연구가 부족한 실정이었다. 또한, 기존의 국외 연구들은 비용적 측면을 함께 고려해 시공자와 거주자의 입장을 모두 고려하였으며, 하자와 원인의 관계를 구조화하기 위한 움직임을 보여주었다. 따라서 본 연구는 창호공사의 시공단계에서 발생하는 원인을 분석해 시공 특성을 반영하고, 하자 보수 후 재발생 가능성에 기초한 유지관리의 중요성을 함께 고려해 중점관리요소를 도출할 것이다. 또한, 궁극적으로 하자 유형과 원인의 인과관계를 분석해 직관적 판단이 가능한 하자 유형별 중점관리요소를 선정함으로써 실효성 높은 하자관리 방안을 제시해 시공단계 하자를 예방하고 유지관리 비용을 저감하는 데 기여할 것이다.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.330-341
• /
• 2007

This work analyzes the performance of the parallel packet switch (PPS) with a sliding window (SW) method. The PPS involves numerous packet switches that operate independently and in parallel. The conventional PPS dispatch algorithm adopts a round robin (RR) method. The class of PPS is characterized by deployment of parallel low-speed switches whose all memory buffers run more slowly than the external line rate. In this work, a novel SW packet switching method for PPS, called SW-PPS, is proposed. The SW-PPS employs memory space more effectively than the existing PPS using RR algorithm. Under identical Bernoulli and bursty data traffic, the SW-PPS provided significantly improved performance when compared to PPS with RR method. Moreover, this investigation presents a novel mathematical analytical model to evaluate the performance of the PPS using RR and SW method. Under various operating conditions, our proposed model and analysis successfully exhibit these performance characteristics including throughput, cell delay, and cell drop rate.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.428-431
• /
• 2009

최근 대형, 와이드 모니터 사용이 일반화되면서 모니터의 작업 공간을 효율적으로 사용하고자 하는 사용자들이 늘어나고 있다. 하나의 윈도우만을 띄워놓고 작업하던 일반적인 사용 패턴에서 여러 개의 창을 한꺼번에 놓고 작업하는 사용 패턴으로 변화하고 있다. 본 논문에서는 사용자가 모니터의 작업공간을 효율적으로 사용할 수 있도록 윈도우 배치를 돕는 시스템을 구현하였다. 일반 유틸리티와 달리 미리보기 화면을 통한 배치가 이루어지기 때문에 사용자가 쉽고 간편하게 작업환경의 구성과 변환할 수 있다. 앞으로 대형, 와이드 모니터의 수요에 발맞춰 윈도우를 효율적으로 이용하고자 하는 사용자의 욕구를 만족시키고 일일이 윈도우를 조절해야하는 불편함을 해소시켜 줄 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.337-338
• /
• 2023

As the number of defects in apartments has increased recently, lawsuits and disputes related to defects have also increased. As a result, the loss of time and money is enormous. Therefore, fundamental measures are needed to reduce the occurrence of defects. Therefore, the purpose of this study is to propose a plan to reduce defects, focusing on window construction. To this end, existing studies were reviewed, and data from domestic construction companies were collected and classified to organize the types of defects. Based on the classified data, eight types with a high incidence of window glass were analyzed according to the time of occurrence, and the cause and causal relationship of the defect were schematized. It aims to identify the degree of possibility of recurrence of defects for each of the eight defect types for experts and derive key management elements using the RII method. Therefore, the goal is to select key management elements of window construction that actively reflect the characteristics of the construction stage.

• Journal of Computing Science and Engineering
• /
• 제7권4호
• /
• pp.220-230
• /
• 2013

In recent years, progress in hardware technology has resulted in the possibility of monitoring many events in real time. The volume of incoming data may be so large, that monitoring all individual data might be intractable. Revisiting any particular record can also be impossible in this environment. Therefore, many database schemes, such as aggregation, join, frequent pattern mining, and indexing, become more challenging in this context. This paper surveys the previous efforts to resolve these issues in processing data streams. The emphasis is on specifying and processing sliding window queries, which are supported in many stream processing engines. We also review the related work on stream query processing, including synopsis structures, plan sharing, operator scheduling, load shedding, and disorder control.