• 건축역사연구
• /
• 제20권4호
• /
• pp.61-80
• /
• 2011

This study estimated the prototype of Yangjindang at the time of its foundation by putting together the literature and discovered data and historical research on family related to Sangju Yangjindang, and looked at its architectural characteristics. These are summarized as follows: First, Yangjindang is an office building which was completed in three years [1629] after its start of construction when Keomgan Jojeong was at the age of 72 [1626] in his latter days and it was used for performing ancestral rites for Jojeong's forefathers of the head family of Pungyang Jo by family origin. Yangjindang was founded as a base of utopia for putting ancestral rites & commemoration, harmoniousness of a tribe, and educational idea into practice together with Ojakdang. Such a movement can be judged to interpret and apply the circumstances of the times realistically and flexibly where they tried to pursue the promotion of Confucianism & studies of the proprieties as well as the consciousness of practice, and to bring a tribe into harmony after the war through the retirement of Toegye School. Second, it is located at a topographically ideal spot on the edge of the Jangcheon-a tributary of Nakdong with a good physiology and landscape and its location was also the lot for a house of Jojeong's ancestor, which was burned down by war. Behind such a location and planning of Yangjindang, it is presumed, though not certain that it was modelled after Naeap village at Andong- Jojeong's parents-in-low's home. Third, as for its foundation size, it's a head house as much as about more than 100-kan, and its structure is composed of Samyo, Bonche, and Yangjindang. In addition, arrangements of buildings and its composition system and renovation procedures followed Chu-tzu Garyoe. Composition of Samyo can be restored to Yangjindang, Jugo, Woesammun, and Samyo; however, there has been no case of existence in case of Jugo building composition & arrangement takes on an aspect of a compromise between Gamyojido and Sandangjido of Garoe, which seems to be the result from flexibly interpreting and applying the rituals and studies of the proprieties of Toegye School in keeping with locational topography and realistic circumstances while making it a principle for them to observe by Toegye School. There exists a difference between Bonche and its counterpart of the upper class housing at Sangju district in that Bonche[main building] is a squre-shaped 'Ttuljip' typical of Andong setting a family ancestral ritual as a main function. Fourth, there existed a lot of hardships in raising money to cover repairs in time of doing repairs to this structure after 180 years since its establishment. In case of the repair work on Bonche, the level of renovation was limited to the replacement of old materials for rafters, doorpost, roof members and railings with new materials, together with partial alterations in case of window system. It is estimated that Yangjindang was renovated in 1808, and afterwards it was renamed Okryujeong after being re-built at another site. Through the repairs, the floor was expanded for the clan's meeting, and angle rafters and roof members were mended as well. Especially, the plane and structure of Okryujeong which was re-built at another site are expected to give clues to its restoration due to the resemblance to original appearance of Yangjindang at the time of its renovation in 1808.

• 복식
• /
• 제2권
• /
• pp.73-88
• /
• 1978

This article is an attempt to explain, at least in part, the contemporary Korean women's consciousness of Western Dreasses. As time changes, the role of clothing undergoes varisous transitions, while values and ways of life are constantly in change. It is, therefore, proper and appropriate to recognize as among the major aspects of social psychology such phenomenon as interests, understanding of clothing, the choice of a dress, and attitudes toward clothing, etc. The purpose of this study is to discover problems concerning and their clothing and their solutions, by means of a surveying approach. The method of research used is based upon questionares distributed to parents of first-year pupils in elementary schools and to female clerks working in offices, covering the period from August through October, 1976. The number of the questionares distrubuted totalled 600, and 526 were returned to the research to be utilized for analysis. The contents of the survey included such things as values concerning clothing, kinds of clothing and their practical use, the selection of clothing and the method of purchase, fashions, etc. The classification of aquisition are self-made clothing, clothing made to order and ready-made materials. It is composed of 25 items, including affirmative reasons as well as negative ones. The processing of the material returned was made by using the computer, and based upon classifications such as ages, monthly income, occupations; thus diagraming the result in percentages. The conclusion made and the improvements proposed are as follows: 1. The values of clothing were placed on the expression of the wearer's personality (32.7) and on eauty(28. 6%). The lower age group places is stress upon the expression of personality, while the higher age group stresses beauty. About 50% of wearers are contented with their clothing, their clothing, the rest of whom them indicating their dissatisfaction with what they wear. As to designs at the time of selection, about 46% indicated their preference of personal expression, 31.8% on usefulness. In selecting material, practicality is emphasized; in selecting patterns, single color is preferred. In short, personal expression and esthetic values are primary, with consideration of practicality in mind. 2. The classification of clothing according to their uses indicates the highest numbers in normal wear (home wears) and clothings to be worn outside home. As to evening dresses, (party dress) only one or two articles were checked by many, and no such article was clamed to be possessed by most. The highest ratio of wearing was shown in the case of home wear (47.3%) and clothing to be worn outside the home, which is 55.8%. The budget for one article of clothing was greatest in the case of home wear, and clothing worn outside the home. Many used both kinds of articles for the same purpose. It is desirable, therefore, that the kinds of clothing should be varied according to the purpose for which they are worn, and that clothing appropriate for that purpose should be worn. 3. The motivation for purchasing clothing was highly chosen in the item of seasonal change, which was 55.7%; Clothing deliberately made was indicated by 45.2%. In the mothods of purchasing clothing, clothing made to order and ready-made was indicated by 44.4%, which is the highest; Clothing made to order was 25.4%, and self-sewing was 1.1%, which is the lowest. (1) In the case of self-sewing, "I like it but it is very hard," was checked by 43.6%; "It is so difficult that I cannot wear such clothing" was checked by 13.3%. From these, we can conclude that the questionees are willing to make clothing by themselves, but techniques involved in sewing and at her problems involved in the skill are complicated but when those problems are eliminated there is a possibility for practice. The response checked by questionees concerning the self-sewing was, "It's economical", which is a clear indication that many questionees are positive for self-sewing. It is generally believed that ready-made clothing is cheaper, but it is not necessarily so. In consideration of the quality of clothing, self-sewing is a necessity, and it is desirable that it should be encouraged. (3) Problems involved in ready-made clothing, such as designs, skills, size (fitting) should be eliminated. When these problems are scientifically gotten rid of, it is possible that affirmative returns will be expected. Affirmative responses such as "Ready-made clothing is economical," "You can select there on the spot," are good signs that many women expect to wear ready-made clothing. It is in this sense that the prospect for ready-made clothing is brighter when much development for ready-made clothing is on the way. 4. Much concern for fashion are checked in such item of questions as "Fashionable clothing in the show window," "Clothes worn by women." The first item was checked by 50.1 %, and the second was checked by 48.6%. The reason for following fashion is "Because many people wear them," which was indicated by 30.4%. The reason for not following fashion is "It is too expensive," which was checked by 29.6%. The 26.2% of the answers indicated that "Fashionable clothing is devoid of personality," The influences of fashion over the development of fashion over the development of clothing are two-fold: Esthetic and active. It is not to be deniable that people follow fashion more or less. 1978.9>

• Journal of Chest Surgery
• /
• 제41권5호
• /
• pp.568-572
• /
• 2008

배경: 이미 여러 외과 영역에서 내시경수술이 보편화 되었고, 심장외과 영역에서도 그간 무펌프 관상 동맥우회술이나, 최소절개 또는 변형된 흉골절개 등을 이용한 최소침습수술이 꾸준히 시도되어 왔다. 하지만, 시야확보 및 체외순환을 위한 흉골절개의 필요성 때문에 이러한 변화에 둔감했던 것이 사실이다. 최근 로봇을 이용한 내시경 심장수술이 도입되는 것은 환영할 만한 일이나 고가의 장비가 필요하다는 문제가 있다. 이에 저자는 기존의 흉강경을 이용하여 심방중격결손의 폐쇄를 시행하였다 대상 및 방법: 2006년 5월부터 2008년 2월까지 15명의 환자를 대상으로 흉강경을 이용한 심방중격결손의 페쇄를 시행하였다. 수술 시 평균 연령은 $31{\pm}6$세였고 이들 중 2명을 제외하고는 모두 여자였다. 술전 심초음파상 심방중격결손의 평균 크기는 $24{\pm}5mm$였고, 삼첨판을 통한 압력차는 $30{\pm}5$ mmHg로 측정되었다. 삼첨판 페쇄부전은 3명에서는 경-중도였고 나머지에서는 경도 이하였으며, 1명에서 경-중도의 승모판폐쇄부전이 동반되었다. 수술은 우측 내경정맥과 대퇴동-정맥으로 캐뉼라를 삽관하여 체외순환을 시행하고, 유방하구를 따라 $4{\sim}5cm$의 소절개를 한 뒤 제4늑간을 통한 작업창과 흉강경으로 시야를 확보하며 심내교정을 시행하였다. 심방중격결손의 페쇄는 11명에서는 자가심낭을 이용하였고 4명에서는 일차봉합하였다. 관련 술기로는 3예의 삼첨판 성형술과 1예의 승모판 성형술을 시행하였다. 체외순환시간은 $160{\pm}47$분, 대동맥차단시간은 $70{\pm}26$분이었다. 결과: 술 후 사망 또는 주요합병증은 없었다. 3예에서 수혈이 필요하였고, 흉관제거 후 기흉이 관찰된 1예와 창상치유가 지연되었던 1예, 일시적인 부정맥의 1예 외에 별다른 합병증 없이 술 후 $5.9{\pm}1.8$일째 퇴원하였다. 술 후 시행한 심초음파 상 잔여 단락은 없었으며, 삼첨판폐쇄부전은 전예에서 경도 이하였다. 평균 추적관찰 기간은 $10.7{\pm}6.4$개월이었고 3명의 환자가 마지막 외래 방문 시 우측 가슴이나 대퇴부 안쪽의 감각이상을 호소하였으나 그 외 이상소견은 없었다. 결론: 저자들은 기존의 흉강경 장비를 이용한 심방중격결손의 페쇄로 술 후 만족할만한 임상적, 미용적 결과를 얻을 수 있었다. 그러나, 아직까지 수술시간이 많이 소요되며, 완전히 폐쇄된 공간 안에서의 수술이 아니고 작으나마 개흉이 필요하므로 향후 경험과 장비 면에서 보완이 필요하리라 생각된다.

• Clinical and Experimental Reproductive Medicine
• /
• 제15권1호
• /
• pp.40-52
• /
• 1988

Estradiol-17${\beta}$($E_2$) levels in the blood were estimated according to varying the time and amount of the administration of $Clomid^{(R)}$. $Clomid^{(R)}$ were administered on the 2nd, 3rd and 4th menstrual day corresponding to the recruitment period and on the 5th menstrual day corresponding to the selection period of the ovarian follicles, respectively. And $Clomid^{(R)}$ were administered 50 mg, 100 mg and 150 mg/day, repectively. The effects of the sequential HMG to $E_2$ levels in the blood were also estimated. The results were as following : 1. Blood $E_2$ levels according to the day and amount of administration of $Clomid^{(R)}$ were the highest in the group 3(D $2{\sim}6$, 150 mg/day, with HMG) and the lowest in the group 6(D $5{\sim]9$, 50 mg/day, without HMG). $E_2$ levels showed increasing tendency to 0 day. 2. In the cases of the administration of $Clomid^{(R)}$ during the $2nd{\sim}6th$ menstrual day, $E_2$ levels according to the amount were similar among groups and showed increasing tendency daily. 3. In the cases of administration of $Clomid^{(R)}$ during the $2nd{\sim}6th$ menstrual day, $E_2$ levels according to the sequential HMG independent of the amount of $Clomid^{(R)}$ were higher in the with HMG group than without HMG groups. 4. In the case of the administration of $Clomid^{(R)}$ during the $5th{\sim}9th$ menstrual day, $E_2$ levels according to the amount were the highest in the 100 mg/day group and the lowest in the 50mg/day group. 5. In the cases of administration of $Clomid^{(R)}$ independent of the amount during the 5th${\sim}$9th menstrual day, $E_2$ levels according to the sequential HMG were higher in the with HMG group than without HMG group. 6. $E_2$ levels according to the amount independent of the day of the administration of $Clomid^{(R)}$ were the highest in the 100 mg/day group and 150 mg/day, 50 mg/day group in low sequence. 7. $E_2$ levels according to the sequential HMG independent of the day and amount of the administration of $Clomid^{(R)}$ were higher in the with HMG group than the without HMG group. 8. $E_2$ levels according to the day of the administration of $Clomid^{(R)}$ independent of the amount of $Clomid^{(R)}$ and sequential HMG were the highest in the group D 2${\sim}$6 and the lowest in the group D 5${\sim}$9. According to the above results, there were higher $E_2$ levels in the group with sequential HMG than without HMG. Therefore, the hypothesis, postulated initially by the author, was not verified that sequential HMG would not affect the $E_2$ levels which were related to the process of the selection of the ovarian follicle in the connection with 'FSH window'. Because it may be the stimulation after the selection of later predominant follicle. And the highest level of $E_2$ was estimated in the $Clomid^{(R)}$ 150 mg/day group with sequential HMG on the 2nd${\sim}$6th day, and the higher levels were estimated in the 2nd${\sim}$6th day, 3rd${\sim}$7th day and 4th${\sim}$8th day groups than the 5th${\sim}$9th day group. The lower levels were estimated in the $Clomid^{(R)}$ 50 mg/day group without HMG than 100 mg/day and 150 mg/day on the 5th${\sim}$9th day. Therefore, further study will be needed that combines analyses of the E2 levels in the blood according to the various administration of $Clomid^{(R)}$ with or without sequential HMG and determination of the numbers and size of the ovarian follicles by ultrasonogram.

• Journal of Gastric Cancer
• /
• 제7권4호
• /
• pp.213-218
• /
• 2007

목적: 조기위암 수술에 복강경 적용의 용이성 및 종양학적 안정성에 대해서는 많은 연구가 아루어지고 있으나, 복 강경 적용의 또 다른 목적인 '삶와 질' 향상에 대한 연구 는 아직 미흡한 현실이다. 이에 저자들은 위암 수술에 복강경 적용이 '삶의 질' 향상에 미치는 장기적 영향을 평가 하고자 본 연구를 고안하였다. 대상 및 방법: 2003년 1월부터 2004년 12월까지만 2년간 순천향대학병원 외과에서 위 절제 수술 후 위암 1기로 진단된 154명의 환자들을 대상으로 수술 후 1년 이상 경과한 시점에서 설문조사를 시행하였다. EORTC OLQ-C30(3판)과 EORTC QLQ-ST022 한글판을 이용하여 한 명의 전문 간호사에 의해 외래 방문 시 직접 면담 혹은 전화 상담을 통해 설문조사를 시행했으며, 통계처리는 SPSS 12.0 for Windows를 이용하였다. 결과: 전체 대상 환자 154명 중 86명에서 설문 조사가 이루어져 58%의 응답률을 보였으며, 86명(개복군: 57명, 복강경군: 29명)의 평균 연령은 55세였고, 남자가 60명 여자가 26명으로 남녀 비는 2.3 : 1 이었다. 개복 군의 종양 크기는 평균 2.42 cm로 복강경군의 평균 종양 크기 1.8 cm에 비해 유의하게 크기가 컸으며(P=0.003), 평균 획득 림프절 수도 개복 군에서 36개로 유의하게 더 많았다(P=0.000). 그 외 종양관련 인자인 원발암와 침윤도, 림프절 전이 및 TNM 병기에 있어서 양 군 간에 차이는 없었다. 전반적인 건강 상태와 관련된 2 항목의 평균 점수는 개복 군이 57 (${\pm}20.6$), 복강경 군이 60.3 (${\pm}20.4$)으로 양 군 간에 유의한 차이는 없었으며, 기능과 관련된 15 항목과 증상과 관련된 13항목에 있어서도 양군 간에 유의한 차이는 없었다. EORTC QLQ-STO22를 이용한 '삶의 질' 비교 결과 개복군의 평균 점수는 94.5 (${\pm}97.3$), 복강경군은 68.9 (${\pm}64.9$)로 개복군에서 전반적으로 불편한 증상을 많이 호소하였으나 통계학적인 차이는 없었다. 결론: EORTC QLQ-C30 (3판)과 EORTC QLQ-STO22 한글판을 이용한 설문조사 결과 장기적인 측면에서 위 절제술에 복 강경 적용이 환자의 '삶의 질' 향상에 영향을 미치지 못했다.

• 한국의학물리학회지:의학물리
• /
• 제14권2호
• /
• pp.124-130
• /
• 2003

현재, 많은 병원이 방사선과 의료영상정보를 기존의 필름형태로 판독하고, 진료하는 방식에서 PACS를 도입하여 디지털 형태로 영상을 전송, 저장, 검색, 판독하는 환경으로 변화하고 있다. 한편, PACS가 가지는 가장 큰 제한점은 휴대성의 결핍이다. 본 연구는 이동형 장치가 가지는 호스트의 이동성 및 휴대성의 장점들을 살리면서, 무선 채널 용량의 한계, 무선 링크 사용이라는 제약점들을 감안하여 의료영상을 JPEG2000 영상압축 방식으로 부호화한 후 무선 환경을 고려한 전송 패킷의 크기를 결정하고자 하였으며, 무선 통신 중 발생되는 패킷 손실에 대응하기 위한 자동 오류 수정 기능도 함께 구현하고자하였다. Window 2000 운영체계에서 의료영상을 로드하고, 데이터베이스화하며, 저장하고, 다른 네트워크와 접속, 제어가 가능한 PC급 서버를 구축하였다. 영상데이터는 무선망을 통해 전송하기 때문에 가장 높은 압축비율을 지원하면서 에너지 밀도가 높은 JPEG2000 알고리즘을 사용하여 영상을 압축하였다. 또한, 무선망 사용으로 인한 패킷 손실에 대비하여, 영상을 JPEG2000 방식으로 부호화한 후 각 블록단위로 전송하였다. PDA에서 JPEG2000 영상을 복호화 하는데 걸리는 시간은 256＊256 크기의 MR 뇌영상의 경우 바로 확인할 수 있었지만, 800＊790 크기의 CR 흥부 영상의 경우 약 5초 정도의 시간이 걸렸다. CDMA 1X(Code-Division Multiple Access 1st Generation) 모듈을 사용하여 영상을 전송하는 경우, 256 byte/sec정도에서는 안정된 전송 결과를 보여주었고, 1 Kbyte/sec정도의 전송의 경우 중간 중간에 패킷이 손실되는 결과를 관찰할 수 있었다. 반면 무선 랜의 경우 이보다 더 큰 패킷을 전송하더라도 문제점은 발견되지 않았다. 현재의 PACS는 유선과 무선사이의 인터페이스의 부재로 인해 유무선 연동이 되지 못하고 있다. 따라서 이동형 JPEG2000 영상 뷰어는 PACS가 가지는 문제점인 휴대성을 보완하기 위하여 개발되었다. 또한 무선망이 가지는 데이터 손실에 대하여서도 허용할 수 있는 범위에서 재전송을 가능하게 함으로서 약한 연결성을 보완하였다. 본 JPEG2000 영상 뷰어 시스템은 기존 유선상의 PACS와 이동형 장치간에 유기적인 인터페이스 역할을 하리라 기대된다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1996년도 춘계학술대회
• /
• pp.1-3
• /
• 1996

시뮬레이션 기법을 이용한 시스템의 분석에 있어서 실험의 자동화는 현재 많은 연구와 개발이 진행 중인 분야이다. 컴퓨터와 정보통신 시스템에 대한 시뮬레이션의 예를 들어 보면, 수많은 모델을 대한 시뮬레이션을 수행할 경우 자동화된 실험의 제어가 요구되고 있다. 시뮬레이션 수행회수, 수행길이, 데이터 수집방법 등과 관련하여 시뮬레이션 실험방법이 자동화가 되지 않으면, 시뮬레이션 실험에 필요한 시간과 인적 자원이 상당히 커지게 되며 출력데이터에 대한 분석에 있어서도 어려움이 따르게 된다. 시뮬레이션 실험방법을 자동화하면서 효율적인 시뮬레이션 출력분석을 위해서는 시뮬레이션을 수행하는 경우에 항상 발생하는 초기편의 (initial bias)를 제거하는 문제가 선결되어야 한다. 시뮬레이션 출력분석에 사용되는 데이터들이 초기편의를 반영하지 않는 안정상태에서 수집된 것이어야만 실제 시스템에 대한 올바른 해석이 가능하다. 실제로 시뮬레이션 출력분석과 관련하여 가장 중요하면서도 어려운 문제는 시뮬레이션의 출력데이터가 이루는 추계적 과정 (stochastic process)의 안정상태 평균과 이 평균에 대한 신뢰구간(confidence interval: c. i.)을 구하는 것이다. 한 신뢰구간에 포함되어 있는 정보는 의사결정자에게 얼마나 정확하게 평균을 추정할 구 있는지 알려 준다. 그러나, 신뢰구간을 구성하는 일은 하나의 시뮬레이션으로부터 얻어진 출력데이터가 일반적으로 비정체상태(nonstationary)이고 자동상관(autocorrelated)되어 있기 때문에, 전통적인 통계적인 기법을 직접적으로 이용할 수 없다. 이러한 문제를 해결하기 위해 시뮬레이션 출력데이터 분석기법이 사용된다.본 논문에서는 초기편의를 제거하기 위해서 필요한 출력데이터의 제거시점을 찾는 새로운 기법으로, 유클리드 거리(Euclidean distance: ED)를 이용한 방법과 현재 패턴 분류(pattern classification) 문제에 널리 사용 중인 역전파 신경망(backpropagation neural networks: BNN) 알고리듬을 이용하는 방법을 제시한다. 이 기법들은 대다수의 기존의 기법과는 달리 시험수행(pilot run)이 필요 없으며, 시뮬레이션의 단일수행(single run) 중에 제거시점을 결정할 수 있다. 제거시점과 관련된 기존 연구는 다음과 같다. 콘웨이방법은 현재의 데이터가 이후 데이터의 최대값이나 최소값이 아니면 이 데이터를 제거시점으로 결정하는데, 알고기듬 구조상 온라인으로 제거시점 결정이 불가능하다. 콘웨이방법이 알고리듬의 성격상 온라인이 불가능한 반면, 수정콘웨이방법 (Modified Conway Rule: MCR)은 현재의 데이터가 이전 데이터와 비교했을 때 최대값이나 최소값이 아닌 경우 현재의 데이터를 제거시점으로 결정하기 때문에 온라인이 가능하다. 평균교차방법(Crossings-of-the-Mean Rule: CMR)은 누적평균을 이용하면서 이 평균을 중심으로 관측치가 위에서 아래로, 또는 아래서 위로 교차하는 회수로 결정한다. 이 기법을 사용하려면 교차회수를 결정해야 하는데, 일반적으로 결정된 교차회수가 시스템에 상관없이 일반적으로 적용가능하지 않다는 문제점이 있다. 누적평균방법(Cumulative-Mean Rule: CMR2)은 여러 번의 시험수행을 통해서 얻어진 출력데이터에 대한 총누적평균(grand cumulative mean)을 그래프로 그린 다음, 안정상태인 점을 육안으로 결정한다. 이 방법은 여러 번의 시뮬레이션을 수행에서 얻어진 데이터들의 평균들에 대한 누적평균을 사용하기 매문에 온라인 제거시점 결정이 불가능하며, 작업자가 그래프를 보고 임의로 결정해야 하는 단점이 있다. Welch방법(Welch's Method: WM)은 브라운 브리지(Brownian bridge) 통계량()을 사용하는데, n이 무한에 가까워질 때, 이 브라운 브리지 분포(Brownian bridge distribution)에 수렴하는 성질을 이용한다. 시뮬레이션 출력데이터를 가지고 배치를 구성한 후 하나의 배치를 표본으로 사용한다. 이 기법은 알고리듬이 복잡하고, 값을 추정해야 하는 단점이 있다. Law-Kelton방법(Law-Kelton's Method: LKM)은 회귀 (regression)이론에 기초하는데, 시뮬레이션이 종료된 후 누적평균데이터에 대해서 회귀직선을 적합(fitting)시킨다. 회귀직선의 기울기가 0이라는 귀무가설이 채택되면 그 시점을 제거시점으로 결정한다. 일단 시뮬레이션이 종료된 다음, 데이터가 모아진 순서의 반대 순서로 데이터를 이용하기 때문에 온라인이 불가능하다. Welch절차(Welch's Procedure: WP)는 5회이상의 시뮬레이션수행을 통해 수집한 데이터의 이동평균을 이용해서 시각적으로 제거시점을 결정해야 하며, 반복제거방법을 사용해야 하기 때문에 온라인 제거시점의 결정이 불가능하다. 또한, 한번에 이동할 데이터의 크기(window size)를 결정해야 한다. 지금까지 알아 본 것처럼, 기존의 방법들은 시뮬레이션의 단일 수행 중의 온라인 제거시점 결정의 관점에서는 미약한 면이 있다. 또한, 현재의 시뮬레이션 상용소프트웨어는 작업자로 하여금 제거시점을 임의로 결정하도록 하기 때문에, 실험중인 시스템에 대해서 정확하고도 정량적으로 제거시점을 결정할 수 없게 되어 있다. 사용자가 임의로 제거시점을 결정하게 되면, 초기편의 문제를 효과적으로 해결하기 어려울 뿐만 아니라, 필요 이상으로 너무 많은 양을 제거하거나 초기편의를 해결하지 못할 만큼 너무 적은 양을 제거할 가능성이 커지게 된다. 또한, 기존의 방법들의 대부분은 제거시점을 찾기 위해서 시험수행이 필요하다. 즉, 안정상태 시점만을 찾기 위한 시뮬레이션 수행이 필요하며, 이렇게 사용된 시뮬레이션은 출력분석에 사용되지 않기 때문에 시간적인 손실이 크게 된다.

• 대한원격탐사학회지
• /
• 제39권5_3호
• /
• pp.949-965
• /
• 2023

본 연구에서는 Sentinel-1 synthetic aperture radar 영상을 활용하여 딥러닝 모델인 Swin Transformer로 국내 농업용 저수지의 수표면적을 모니터링 하는 방법을 제시한다. Google Earth Engine 플랫폼을 이용하여 70만톤 급, 90만톤급, 150만톤급 저수지 7개소에 대한 2017년부터 2021년 데이터셋을 구축하였다. 저수지 4개소에 대한 영상 1,283장에 대해서 셔플링(suffling) 및 5-폴드(fold) 교차검증 기법을 적용하여 모델을 학습하였다. 시험평가 결과 모델의 윈도우 크기를 12로 설정한 Swin Transformer Large 모델은 각 폴드에서 평균적으로 99.54%의 정확도와 95.15%의 mean intersection over union (mIoU)을 기록하여 우수한 의미론적 분할 성능을 보여주었다. 최고 성능을 보여준 모델을 나머지 3개소 저수지 데이터셋에 적용하여 성능을 검증한 결과, 모든 저수지에서 정확도 99% 및 mIoU 94% 이상을 달성함을 확인했다. 이러한 결과는 Swint Transformer 모델이 국내의 농업용 저수지의 수표면적 모니터링에 효과적으로 활용될 수 있음을 보여준다.

• 지능정보연구
• /
• 제25권1호
• /
• pp.163-177
• /
• 2019

스마트폰이 널리 보급되고 현대인들의 생활 속에 깊이 자리 잡으면서, 스마트폰에서 수집된 다종 데이터를 바탕으로 사용자 개인의 행동을 인식하고자 하는 연구가 활발히 진행되고 있다. 그러나 타인과의 상호작용 행동 인식에 대한 연구는 아직까지 상대적으로 미진하였다. 기존 상호작용 행동 인식 연구에서는 오디오, 블루투스, 와이파이 등의 데이터를 사용하였으나, 이들은 사용자 사생활 침해 가능성이 높으며 단시간 내에 충분한 양의 데이터를 수집하기 어렵다는 한계가 있다. 반면 가속도, 자기장, 자이로스코프 등의 물리 센서의 경우 사생활 침해 가능성이 낮으며 단시간 내에 충분한 양의 데이터를 수집할 수 있다. 본 연구에서는 이러한 점에 주목하여, 스마트폰 상의 다종 물리 센서 데이터만을 활용, 딥러닝 모델에 기반을 둔 사용자의 동행 상태 인식 방법론을 제안한다. 사용자의 동행 여부 및 대화 여부를 분류하는 동행 상태 분류 모델은 컨볼루션 신경망과 장단기 기억 순환 신경망이 혼합된 구조를 지닌다. 먼저 스마트폰의 다종 물리 센서에서 수집한 데이터에 존재하는 타임 스태프의 차이를 상쇄하고, 정규화를 수행하여 시간에 따른 시퀀스 데이터 형태로 변환함으로써 동행 상태분류 모델의 입력 데이터를 생성한다. 이는 컨볼루션 신경망에 입력되며, 데이터의 시간적 국부 의존성이 반영된 요인 지도를 출력한다. 장단기 기억 순환 신경망은 요인 지도를 입력받아 시간에 따른 순차적 연관 관계를 학습하며, 동행 상태 분류를 위한 요인을 추출하고 소프트맥스 분류기에서 이에 기반한 최종적인 분류를 수행한다. 자체 제작한 스마트폰 애플리케이션을 배포하여 실험 데이터를 수집하였으며, 이를 활용하여 제안한 방법론을 평가하였다. 최적의 파라미터를 설정하여 동행 상태 분류 모델을 학습하고 평가한 결과, 동행 여부와 대화 여부를 각각 98.74%, 98.83%의 높은 정확도로 분류하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.