• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2015

Purpose In SPECT image, scatter count is the cause of quantitative count error and image quality degradation. Thus, a wide range of scatter correction(SC) methods have been studied and this study is to evaluate the accuracy of CT based SC(CTSC) used in SPECT/CT as the comparison with existing energy window based SC(EWSC). Materials and Methods SPECT/CT images were obtained after filling air in order to acquire a reference image without the influence of scatter count inside the Triple line insert phantom setting hot rod(74.0 MBq) in the middle and each SPECT/CT image was obtained each separately after filling water instead of air in order to derive the influence of scatter count under the same conditions. In both conditions, Astonish(iterative : 4 subset : 16) reconstruction method and CT attenuation correction were commonly applied and three types of SC methods such as non-scatter correction(NSC), EWSC, CTSC were used in images filled with image. For EWSC, 9 sub-energy windows were set additionally in addition to main(=peak) energy window(140 keV, 20%) and then, images were acquired at the same time and five types of EWSC including DPW(dual photo-peak window)10%, DEW(dual energy window)20%, TEW(triple energy window)10%, TEW5.0%, TEW2.5% were used. Under the condition without fluctuations in primary count, total count was measured by drawing volume of interest (VOI) in the images of the two conditions and then, the ratio of scatter count of total counts was calculated as percent scatter fraction(%SF) and the count error with image filled with water was evaluated with percent normalized mean-square error(%NMSE) based on the image filled with air. Results Based on the image filled with air, %SF of images filled with water to which each SC method was applied is NSC 37.44, DPW 27.41, DEW 21.84, TEW10% 19.60, TEW5% 17.02, TEW2.5% 14.68, CTSC 5.57 and the most scattering counts were removed in CTSC and %NMSE is NSC 35.80, DPW 14.28, DEW 7.81, TEW10% 5.94, TEW5% 4.21, TEW2.5% 2.96, CTSC 0.35 and the error in CTSC was found to be the lowest. Conclusion In SPECT/CT images, the application of each scatter correction method used in the experiment could improve the quantitative count error caused by the influence of scatter count. In particular, CTSC showed the lowest %NMSE(=0.35) compared to existing EWSC methods, enabling relatively accurate scatter correction.

• Korean Management Science Review
• /
• v.22 no.2
• /
• pp.77-97
• /
• 2005

The traditional measures of a container port (or terminal) efficiency such as crane productivity, cargo throughput, etc. were generally presenting the partial efficiency since they evaluated only each individual factor and based on cross-sectional data. To overcome this problem, and in an effort to help port authorities develop a winning strategy in the increasingly competitive container transportation market, this Paper develops a meaningful set of benchmarks that will set the standard for best practices. In particular, this paper proposed a combined method to merge the DEA and simulation technique over time. To illustrate the usefulness of the proposed combined DEA/simulation model, this paper used the panel data of the four Gwangyang container terminals and seven Busan container terminals in Korea over the four-year period of 1999 through 2002.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.654-668
• /
• 2002

In this paper, we present an empirical study for improving the Korean text chunking based on machine learning and feature set selection approaches. We focus on two issues: the problem of selecting feature set for Korean chunking, and the problem of alleviating the data sparseness. To select a proper feature set, we use a heuristic method of searching through the space of feature sets using the estimated performance from a machine learning algorithm as a measure of "incremental usefulness" of a particular feature set. Besides, for smoothing the data sparseness, we suggest a method of using a general part-of-speech tag set and selective lexical information under the consideration of Korean language characteristics. Experimental results showed that chunk tags and lexical information within a given context window are important features and spacing unit information is less important than others, which are independent on the machine teaming techniques. Furthermore, using the selective lexical information gives not only a smoothing effect but also the reduction of the feature space than using all of lexical information. Korean text chunking based on the memory-based learning and the decision tree learning with the selected feature space showed the performance of precision/recall of 90.99%/92.52%, and 93.39%/93.41% respectively.

• Journal of the Korean Society for Library and Information Science
• /
• v.51 no.3
• /
• pp.293-322
• /
• 2017

The purpose of the study is to identify the background of the agenda-setting to appoint library professional as the director of National Assembly Library and characteristics of the policy entrepreneur of this agenda. To this purpose an agenda-setting process in 2014 is analyzed with the Kingdon's multiple streams model. Kingdon's multiple streams model explains that an agenda is set when a window of opportunity is opened by coupling of problem stream, political stream, and policy stream. They have existed independently before setting the agenda. This study showed that the political stream was the major stream to open the window of opportunity. The lawmaker in the opposition party is identified as the leader for the agenda and the motivations, resources, and strategies of the policy entrepreneur were also analyzed. The analysis showed the agenda for library professional as the director was set without visible participation of library professionals. Therefore this study proposed the library professionals' roles for the library and information policy making process.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.469-479
• /
• 2015

This study have been conducted to analyze the feasibility of establishing Contamination Warning System(CWS) that is capable of monitoring early natural or intentional water quality accidents, and providing active and quick responses for domestic C_water supply system. In order to evaluate the water quality data set, pH, turbidity and free residual chlorine concentration data were collected and each statistical value(mean, variation, range) was calculated, then the seasonal variability of those were analyzed using the independent t-test. From the results of analyzing the distribution of outliers in the measurement data using a high-pass filter, it could be confirmed that a lot of lower outliers appeared due to data missing. In addition, linear filter model based on autoregressive model(AR(1) and AR(2)) was applied for the state estimation of each water quality data set. From the results of analyzing the variability of the autocorrelation coefficient structure according to the change of window size(6hours~48hours), at least the window size longer than 12hours should be necessary for estimating the state of water quality data satisfactorily.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.347-349
• /
• 2009

Air quality of indoor space environment is affected by various pollutants like as particles and chemical stuffs. The indoor air pollution affects directly the human respiration organs to cause consequently unpleasant mental status. The $CO_2$ concentration level is one of the harmful components of air pollutants. Major factor to increase the $CO_2$ concentration level is the people's breath amount in indoor. The car exhaust gas diffused from the around road also has strong affect on $CO_2$ concentration. There are some other reasons to affect the $CO_2$ concentration change, such as, real-time change of the population movement, closeness to the indoor air flow inlet window and changes in road car traffic amount. A remote monitoring system to measure environmental indoor air pollution concerning on the $CO_2$ concentration was studied and installed realized set-up model. Zigbee network configuration was applied for this system and the $CO_2$ concentration data were collected through USN network. A software program was developed to assure systematic analysis and to display real-time data on web pages. For the experimental test various condition was set up, like as, window opening, stopping air condition operation and adjusting fan heater work, etc. The analysis result showed the relation of various environmental conditions to $CO_2$ concentration changes. The causes to increase $CO_2$ concentration were experimentally defined as windows closing, the stopping air condition system, fan heater operation. To keep the $CO_2$ concentration under the legally required ppm level in public access indoor space, the developed remote measurement system will be usefully applied.

• Journal of Korea Multimedia Society
• /
• v.17 no.6
• /
• pp.706-715
• /
• 2014

It is used to lead to serious structural vulnerability of the system security of security-critical system when we have quickly developed software system according to urgent release schedule without appropriate security planning, management, and assurance processes. The Data Set and Provider of DataSnap, which is a middleware of Delphi XE2 of the Embarcadero Technologies Co., certainly help to develop an easy and fast-paced procedure, but it is difficult to apply security program and vulnerable to control software system security when the connection structure Database-DataSnap server-SQL Connection-SQL Data set-Provider is applied. This is due to that all kinds of information of Provider are exposed on the moment when DataSnap Server Port is sure to malicious attackers. This exposure becomes a window capable of running SQL Command. Thus, it should not be used Data Set and Provider in the DataSnap Server in consideration of all aspects of security management. In this paper, we study on the verification of the security vulnerabilities for Client and Server DataSnap in Dlephi XE2, and we propose a secure coding method to improve security vulnerability in the DataSnap server system.

• Journal of KIISE:Databases
• /
• v.31 no.2
• /
• pp.140-149
• /
• 2004

Data broadcast has received much attention as a very efficient method for disseminating data items in mobile environment with large number of mobile clients. In this approach, a database server periodically and continuously broadcasts data items through wireless channels and clients perform read-only transactions by accessing necessary data items from the air. While broadcasting, the server must also process update transactions on the database, which raises an obstacle for client's accessing consistent data. In this research, we propose a new algorithm SCDSC(Serialization Checking with DirtySet on Commit) which is an alternative for solving the concurrency control problem efficiently. The SCDSC is a kind of optimistic concurrency control in that a client checks the consistency of data using a DirtySet as a part of data broadcast when it commits its transaction. In each broadcast cycle, the server updates and disseminates the DirtySet with newly changed data items for last few cycles in the sliding window approach. We perform an analysis and a simulation study to evaluate the performance of our SCDSC algorithm in terms of data consistency and data currency.

• Journal of the Korea Furniture Society
• /
• v.28 no.1
• /
• pp.47-52
• /
• 2017

With the rapid economical and technological progress in China, the demand for wine increased tremendously along with the need for wine storage furniture and wine related products. Although demand for furniture increased, consumers' emotional need toward high quality design product has not been met properly. As the quality of people's life improves, they pursue better materials providing them with higher mental satisfaction. To meet the specific demand of Chinese market stated above, the direction of this report is set as to study pattern elements of Chinese traditional lattice and combine them with wine storage furniture design and crafting, which is originated from western culture. By doing that, the study is aimed to suggest a new direction of Chinese modern design and to improve the fundamental notion of Chinese furniture design. Although wine and wine racks are from western world, the wine mini-bar designed in this study stands out for its beauty and taste of eastern culture. It not only fits perfectly to the habits and taste of wine lovers, but also goes very well with fusion style interior design trend in modern China. The furniture carries the charm of eastern cultural tradition and elegance of modern furniture design in one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.336-339
• /
• 2007

A new query model is required to match requirements of stream-based applications such as patient monitoring system, since traditional DBMSs are not designed to provide continuous queries over stream data. In the patient monitoring system, there are many types of biomedical signals such as blood pressure and temperature, and these signals gathered by biomedical sensors should be treated as a stream, that is an ordered set of signals. In this paper, we categorized all possible queries to be used in patient monitoring system by four types of queries. Then, we have proposed a new sliding window query model which is capable of expressing these four types of queries.