• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.63-69
• /
• 2014

This paper studies the strength, fatigue sensitivity, safety factor and lifetimes by means of structural and fatigue analyses of different models of rear doors upon the opening of doors and windows leading to severe fatigue fractures of the window motor components of rear doors. The simulation models were a standard model and other models. The other models, which are denoted here as models I and II, were modified versions of the standard model, with a rib of 3mm and a thickness of 2mm as compared to the standard model. The door was modelled with CATIA V5 and analyzed with the ANSYS program. The material of the rear door was cold rolled steel (DDQ). From the study results, the standard model and model I were confirmed to be less safe upon the opening of the door as compared to the opening of a window in terms of fatigue, but model II was found to be safe for both door and window openings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.525-530
• /
• 2013

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper, climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Noise source identification was carried out for the reduced the loudness and sharpness during glass transferred section and impulsive noise at stop section, Using the source identification result, several improvement points were applied. And finally, the degree of sound quality improvement was judged using sound quality index.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.184-193
• /
• 2001

In vector control technique, stator currents of an induction motor are transformed to equivalent d-q currents in a reference frame consist of d and q axis, each of which is coincide with flux and torque direction respectively. Since the current in q-axis is related to the torque in a synchronously rotating frame, torque is estimated as a function of q-axis current and flux. In this paper, a method to estimate torque of an induction motor based on the measurement of 3-phase currents and rotating velocity of a rotor is presented. Graphic-programming is used to measure signals, to estimate the torque and to show the result in the form of user friendly graph in window environment. To stabilize the fluctuation of estimated torque caused from the small measurement error of the rotor velocity, the stator current is reconstructed in a program based on measured signals. The experimental results executed under the velocity of 500 rpm, 1500 rpm without load and 1500 rpm with load show that the proposed method estimates the torque very well.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.504-505
• /
• 2017

센서와 왕복 모터를 이용한 스마트 창문 여닫이 로봇 팔은 온습도 센서를 이용하여 구성되는 시스템으로 일반 사용자에게 편리하고 안전한 메타포를 제공한다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.634-637
• /
• 2005

We propose a charge/discharge model for network based vehicle. These model include motor, alternator, lamp, brake, window brush, air conditioner, etc.. Also, we simulate these models in Matlab. The simulation results show that error range is less than 3%. So, we can adopt these model to charge/discharge simulator for network based vehicle. If this error range can be shrunk within 2%, we can use this simulator for comertial use.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.510-513
• /
• 2018

본 논문은 다양한 워드 임베딩 모델(word embedding model)들과 하이퍼 파라미터(hyper parameter)들을 조합하였을 때 특정 영역에 어떠한 성능을 보여주는지에 대한 연구이다. 3 가지의 워드 임베딩 모델인 Word2Vec, FastText, Glove의 차원(dimension)과 윈도우 사이즈(window size), 최소 횟수(min count)를 각기 달리하여 총 36개의 임베딩 벡터(embedding vector)를 만들었다. 각 임베딩 벡터를 Fast and Accurate Dependency Parser 모델에 적용하여 각 모들의 성능을 측정하였다. 모든 모델에서 차원이 높을수록 성능이 개선되었으며, FastText가 대부분의 경우에서 높은 성능을 내는 것을 알 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.217-221
• /
• 2002

In this research a Matlab/Simulink/RTW - based on the realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed In the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then a DSP c compiler complies the program codes.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.466-471
• /
• 2006

This raper presents a new optimization method combining the genetic algorithm with the response surface method for the optimum design of a Brushless Direct Current motor. The method utilizes a regression function approximating an objective function and the window moving and zoom-in method so as to complement disadvantages of both the genetic algorithm and response surface method. The results verify that the proposed method is powerful and effective in reducing cogging torque by optimizing only a few decisive design factors compared with the conventional stochastic methods.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.884-885
• /
• 2007

This paper presents an window based user-friendly designed characteristics analysis program of permanent-split capacitor single-phase induction motor. For the analysis, equivalent magnetic circuit and symmetrical coordinate method are used. The saturation effect and iron loss of stator and rotor core are considered. The analysis program is made to GUI type which can be used easily by many elementary designer. The accuracy of analysis is verified by comparison with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1879-1882
• /
• 2005

Due to increase of demands on safety and convenience for automotive vehicle, the use of DC motor, such as power window, seat adjusting, pedal adjusting, sunroof, electric shift motor and so on, is increasing rapidly in the whole world. Worm gear is an important part to transmit torque to another gear in gear mechanism of automotive DC motor. But with current forming process, it has some problems in manufacturing and the quality. Also, the characteristics of automotive parts such as price and mass-production limit the quality improvement. Recently several methods are used in order to reduce a worm screw machining time and to maintain precision. In this paper, we introduce whirling tool machining and side milling cutter machining as effective manufacturing method of worm screw and study on the cutting force of side milling cutter and whirling tool in worm screw machining.