• Composites Research
• /
• 제13권2호
• /
• pp.51-60
• /
• 2000

본 논문에서는 두께 방향의 와인딩 각도 변화를 고려한 필라멘트 와인딩 된 압력탱크의 해석을 수행하였다. 두께방향의 와인딩 각도를 고려하기 위하여 임의의 맨드릴 표면에 대한 필라멘트 와인딩 궤적을 찾아낼 수 있는 semi-geodesic path식을 도입하였다. 필라멘트 와인딩 된 압력탱크의 유한요소 모델링을 위하여 3차원 적층고체요소를 사용하였으며, 상용프로그램ABAQUS를 이용하여 유한요소해석을 수행하였다. 해석에서는 모재 파손에 의한 강성저하를 모사하기 위하여 재료 비선형성을 고려하였으며, 이를 위하여 각 하중 증분 후에 섬유 수직방향 응력을 모재의 인장강도와 비교하는 최대응력파손이론을 도입하였고, 파손이 일어난 층에 대해서 모재 방향의 재료 상수를 1/10로 저하시켰다. 그리고, 점진적 파손해석을 수행한 결과를 문헌에 주어진 실험데이터와 비교하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.250-253
• /
• 2000

The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. Unidirectional FRP made by pultrusion method has comparatively lower compressive strength than tensile strength. Compressive strength of unidirectional FRP may be increased by filament winding layer which has tensile stress when compressive stress was loaded. In this study, compressive strength and stresses of FRP rods were simulated according to the winding orientation of glass fiber. Inner part of FRP was made unidirectionally by pultrusion method and outer part of FRP was made by filament winding method. Simulated value and real evaluated compressive strength were compared to investigate stresses which is prominent to the fracture of FRP. The shear stresses had a great effect on the strength of FRP although the stress of parallel direction of FRP was much higher.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권6호
• /
• pp.321-327
• /
• 2000

FRP has been used very much as high strength and electrical insulation materials. The fiber contributes the high strength and modulus to the composite. The main roles of the matrix in composite materials like FRP are to transmit and distribute stresses among the individual fibers. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. In this study, compressive and bending stresses of FRP rods were simulated and measured according to the winding orientation of glass fiber. Inner part of FRP was made unidirectionally by pultrusion method and outer part of FRP was made by filament winding method to give fiber orientation to the FRP. The shear stresses had great effect on the strength of FRP although the stress of parallel direction of FRP was much higher. The tendency of compressive and bending strengths with glass fiber orientation was different each other.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.467-470
• /
• 2006

Superconducting fault current(SFCLs) are expected to improve not only reliability but also stability of real power systems. The analysis on the single line-to-ground fault current of the integrated three phase flux-lock type SFCL, which consists of three flux-lock reactor wound on an iron core in each single phase and three YBCO thin films, was investigated in current limiting operating characteristics. We compared additive polarity winding with the subtractive one in the flux lock reactor. Its turns ratio each phase between the primary and the secondary coils is 63:42. When a single line-to-ground fault occurred in any phase, the peak value of line current in the fault phase of the additive polarity winding increased up to 31.44[A] during first-half cycle. On the other hand, the peak value in the subtractive polarity winding increased up to 81.77[A] under the same conditions. This is because the current flow between the primary and the secondary windings becomes to be additive or subtractive in each winding direction. We confirmed that the current limiting behavior in the additive polarity winding was more effective for a single-line-to ground fault.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.30-34
• /
• 2011

본 논문은 104L의 저장용량과 70MPa의 사용압력을 갖는 수소연료탱크용 복합소재 압력용기에 관한 강도안전성을 해석한 평가연구이다. 탄소섬유 복합용기의 내측은 6061-T6의 알루미늄 라이너를 사용하고, 외경측은 원주방향을 따라서 탄소섬유 후프층을 형성하고, 또한 $12^{\circ}C$ 적층과 $70^{\circ}C$ 적층을 헤리컬방향으로 경사지게 감아서 제작하였다. 복합소재 연료탱크의 강도안전성에 대한 FEM 해석결과는 US DOT-CFFC와 KS B ISO 11119-2 규정에 따라 평가되었다. FEM 해석결과에 의하면, 104L의 복합용기로 제시된 설계모델을 US DOT-CFFC와 KS B ISO 11119-2 기준으로 평가할 때 모두 안전하다할 수 있다. 그렇지만, 탄소섬유 연료탱크에 대한 계산결과는 한국의 평가기준을 사용하기보다는 미국의 안전기준을 적용하는 것이 더 안전하다는 해석결과를 알 수 있다. 따라서 70MPa의 수소연료 압력용기의 강도안전성을 충분히 확보하기 위해서는 미국의 DOT-CFFC 안전기준에 의거 평가하고 설계하는 것이 바람직하다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.42-47
• /
• 2008

In this paper, the fault current limiting characteristics for the superconducting fault current limiter(SFCL) using magnetic coupling between two coils were investigated. The SFCL consists of a high-$T_c$ superconducting(HTSC) element and two coils. This SFCL has different characteristics that depend on the connection form, the winding direction and the inductance ratio of two coils. The impedance and the operational current of the SFCL can be adjusted higher or lower than the resistance and the critical current of HTSC element. Therefore, the SFCL can change the amplitude of the limited fault current. To confirm it, the HTSC element was modeled and the fault current limiting characteristics of the SFCL were analysed through computer simulation. It was obtained from the analysis that the connection form and the winding direction of two coils of the SFCL were the important design parameters.

• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.141-146
• /
• 2011

When the current of the superconducting element exceeds its critical current by the fault occurrence, the quench of the high-$T_C$ superconducting fault current limiter (HTSC) comprising the flux-lock type superconducting fault current limiter (SFCL) occurs. Simultaneously, the magnetic flux in the iron core induces the voltage in each coil, which contributes to limit the fault current. In this paper, the fault current limiting characteristics of the flux-lock type SFCL as well as the load voltage sag suppressing characteristics according to the flux-lock type SFCL's winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the flux-lock type SFCL were carried out. The flux-lock type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag suppressing operations through the fast quench occurrence right after the fault occurs and the fast recovery operation after the fault removes than the flux-lock type SFCL designed with the subtractive polarity winding.

• Composites Research
• /
• 제14권6호
• /
• pp.24-31
• /
• 2001

필라멘트 와인딩 연소관의 제작에 있어서 라이너 표면의 형상과 와인딩되는 섬유각도는 제작 공정상의 편의와 제작 후 구조물의 성능에 큰 영향을 미친다. 본 연구에서는 두 개의 반구를 합친 험상의 라이너 위에 와인딩된 로켓 연소관의 유한 요소 해석을 수행하였다. 32개의 스트레인 게이지를 표면에 부탁한 후 수압실험을 실시하여 유만 요소 해석 과정을 검증하였고, 웨이퍼(wafer)를 통한 국부적 보강 방법에 대한 해석을 수행하였다. 파손에 따른 재료의 비선형 거동을 고려한 점진적 파손 해석을 통해 연소관의 과열 압력과 취약부위에 대한 연구를 수행하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.429-432
• /
• 2004

The demand for electric power keeps growing, and tends to be more effective. Polymer insulators have been manufactured for almost twenty years and the excellent insulation performance of polymer insulators is attractive. Polymeric materials are now widely used as a replacement for inorganic materials such as porcelain or glass for the outdoor insulation of high voltage insulation. GFRP has been used widely as a core materials for polymer insulators. This paper reports the mechanical properties of GFRP for insulators. The bending strength was simulated and evaluated according to the winding angle. The fiber orientation in GFRP has a great effect on the strength of GFRP because the strength of GFRP mainly depends on the strength of fiber. Results of simulated and evaluated strength of GFRP were compared each other. The simulated strength of GFRP rod was different from the evaluated strength. It was caused that the shear stress had a great effect on the strength of GFRP although the stress of parallel direction of GFRP was much higher.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.180-181
• /
• 2007

In this paper, SFCL using two magnetically coupled coils was modeled and simulated by PSCAD/EMTDC. The simulation was shown that fault current could be adjusted with the inductance ratio and the winding direction of two coils. The limited fault current in case of the additive polarity winding was lower than that of the subtractive polarity. The analysis results were compared with the calculated ones, and both the results agreed.