• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.82-93
• /
• 2002

The effects of the interaction between the flow and temperature field and a boundary layer due to a variety of the height of a vortex generator are experimentally investigated. The test facility consists of a boundary-layer wind tunnel with the vortex generator protruding from the bottom surface. In order to control the strength of the longitudinal vortices, the angle of attack and the spacing distance of the vortex generator are 20 degree and 40 mm, respectively. The height of the vortex generator (H) is 15 mm, 20 mm and 30 mm and the cord length of it is 50 mm. Three-component mean velocity measurements are made using a 5-hole probe system and the surface temperature distribution is measured by the hue capturing method using thermochromatic liquid crystals. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the downwash region where the strong downflow and the lateral outflow of the boundary layer fluid occur and thickened in the upwash re,3ion where the longitudinal vortex sweeps low momentum fluid away from the bottom surface. In case that the height of the vortex generator increases, the averaged circulation and the maximum vorticity of the vortex pair decrease. The contours of the non-dimensional temperature show the similar trends fur all the cases (H=15 mm, 20 mm and 30 mm). The peak augmentation of the distribution of the local non-dimensional temperature occurs in the downwash region near the point of minimum boundary-layer thickness.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.27-38
• /
• 2005

The present study investigated the effect of relative position of the blade on blade surface heat transfer. The experiments were conducted in a low speed wind tunnel with a stationary annular turbine cascade. The test section has a single turbine stage composed of sixteen guide vanes and blades. The chord length of the blade is 150 mm and the mean tip clearance of the blade is $2.5\%$ of the blade chord. The Reynolds number based on blade inlet velocity and chord length is $1.5{\times}105$ and mean turbulence intensity is about $3\%$. To investigate the effect of relative position of blade, the blade at six different positions in a pitch was examined. For the detailed mass transfer measurements, a naphthalene sublimation technique was used. In general, complex heat transfer characteristics are observed on the blade surface due to various flow characteristics, such as a laminar flow separation, relaminarization, flow acceleration, transition to turbulence and tip leakage vortices. The results show that the blade relative position affects those heat transfer characteristics because the distributions of incoming flow velocity and turbulence intensity are changed. Especially, the heat transfer pattern on the near-tip region is significantly affected by the relative position of the blade because the effect of tip leakage vortex is strongly dependent on the blade position. On the pressure side, the effect of blade position is not so significant as on the suction side surface although the position and the size of the separation bubble are changed.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.713-721
• /
• 2001

Characteristics of the conical vortices on the roof corner of a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. The Reynolds number based on the free stream velocity and the height of the model was 5.3$\times$10$^3$. The mean, instantaneous velocity vector fields, vorticity fields, and turbulent kinetic energy distribution were measured for two different angles of attack, 30$^{\circ}$and 45$^{\circ}$. The PIV measurements clearly observed not only the conical main vortex and the secondary vortex but also the tertiary vortex which is firstly reported in this paper. Asymmetric formation of the corner vortex for the case of 30$^{\circ}$angle of attack produces relatively the high magnitude of vorticity and turbulent kinetic energy around the bigger vortex which generates the peak suction pressure on the roof. Fairly symmetric features of the roof vortex are observed in the case of 45$^{\circ}$angle of attack, however, the dynamic characteristics are proved to be asymmetric due to the rectangular shape of the roof.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.103-111
• /
• 2006

The spray behavior of direct-injection spark-ignition(DISI) engines is crucial for obtaining the required mixture distribution for optimal engine combustion. The spray characteristics of DISI engines are affected by many factors such as piston bowl shape, air flow, ambient temperature, injection pressure and fuel temperature. In this study, the effect of fuel temperature on the spray and combustion characteristics was partially investigated for the wall-guided system. The effect of fuel temperature on the fan spray characteristics was investigated in a steady flow rig embodied in a wind tunnel. The shadowgraphy and direct imaging methods were employed to visualize the spray development at different fuel temperatures. The microscopic characteristics of spray were investigated by the particle size measurements using a phase Doppler anemometry(PDA). The effect of injector temperature on the engine combustion characteristics during cold start and warming-up operating conditions was also investigated. Optical single cylinder DISI engine was used for the test, and the successive flame images captured by high speed camera, engine-out emissions and performance data have been analyzed. This could give the way of forming the stable mixture near the spark plug to achieve the stable combustion of DISI engine.

• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.562-570
• /
• 2009

불어내기식 극초음속 풍동을 이용하여 2차원형 돌출물 주위의 유동 및 공력가열 특성에 대한 실험적 연구를 수행하였다. 실험의 유입 유동 조건은 마하수 7, 단위 레이놀즈수 $2.0{\times}10^6/m$ 이다. 실험 조건은 길이가 다른 두 개의 평판에 세 가지 돌출물이 높이에 따라 변화되며, 실험데이터는 쉴리렌 이미지 가시화 기법과 돌출물 전면에서의 열유속 게이지를 이용한 열유속 측정을 통해 획득되었다. 또한, 본 논문에서는 경계층 천이 탐지기법과 같은 극초음속 유동 실험 기법도 함께 제시하였다. 실험 결과 돌출물 전방에 큰 박리 영역이 관찰되었으며, 박리 영역은 돌출물의 높이와 평판의 길이에 따라 민감하게 변화 하였다. 가장 큰 돌출물의 경우에서만, 돌출물 상부 측정점에서 열유속 측정치의 급격한 점프가 있는 것으로 관찰되었다. 또한 측정된 열유속은 돌출물의 높이가 크고 평판의 길이가 길수록 증가하는 경향성을 보였다.

• 한국항공우주학회지
• /
• 제43권9호
• /
• pp.765-772
• /
• 2015

칼새 비행의 생체모방 초소형 비행체 적용 가능성을 확인하기 위한 공력측정과 위상동기 PIV 연구가 수행되었다. 2축 회전자유도의 로봇 날개 모델과 불어내기식 풍동을 사용하였다. 비틀림 각은 ${\pm}0$, ${\pm}5$, ${\pm}10$, ${\pm}20$도의 진폭을 갖고, 스트로크각은 90도의 위상차를 갖는 단순조화함수로 변화시켰다. 비틀림 각에 따른 시간에 대한 양력계수 변화는 작은 공력감소와 지연만을 나타내며 주목할 만한 차이를 보이지 않았다. 그러나 항력은 작은 비틀림 각 변화가 큰추력을 생성할 수 있음을 보여주었다. 이러한 것들은 칼새가 비행 중에 작은 비틀림 각을 사용하는 이유를 간접적으로 설명해 준다. PIV연구 결과는 공력지연이 날개주위의 와류구조와 밀접한 관계있다는 것을 보여준다. 이러한 결과는 칼새 모방형 초소형비행체 설계에 있어 비틀림 각은 필수적인 파라미터로서 반드시 고려되어야 함을 의미한다.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1023-1032
• /
• 2003

The effect of local forcing on the separated flow over a backward-facing step is investigated through hot-wire measurements and flow visualization with multi-smoke wires. The boundary layer upstream of the separation point is laminar and the Reynolds number based on the free stream velocity and the step height is 13800. The local forcing is given from a slit located at the step edge and the forcing signal is always defined when the wind tunnel is in operation. In case of single frequency forcing, the streamwise velocity and the reattachment length are measured under forcing with various forcing frequencies. For the range of 0.010〈S $t_{\theta}$〈0.013, the forcing frequency component of the streamwise velocity fluctuation grows exponentially and is saturated at x/h = 0.75 , while its subharmonic component grows following the fundamental and is saturated at x/h = 2.0. However, the saturated value of the subharmonic is much lower than that of the fundamental. It is observed that the vortex formation is inhibited by the forcing at S $t_{\theta}$ = 0.019 . For double frequency forcing, natural instability frequency is adopted as a fundamental frequency and its subharmonic is superposed on it. The fundamental frequency component of the streamwise velocity grows exponentially and is saturated at 0.5 < x/ｈ < 0.75, while its subharmonic component grows following the fundamental and is saturated at x/ｈ= 1.5 . Furthermore, the saturated value of the subharmonic component is much higher than that for the single frequency forcing and is nearly the same or higher than that of the fundamental. It is observed that the subharmonic component does not grow for the narrow range of the initial phase difference. This means that there is a range of the initial phase difference where the vortex parring cannot be enhanced or amplified by double frequency forcing. In addition, this effect of the initial phase difference on the development of the shear layer and the distribution of the reattachment length shows a similar trend. From these observations, it can be inferred that the development of the shear layer and the reattachment length are closely related to the vortex paring.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2150-2158
• /
• 1992

본 연구에서는 복잡한 유동형태를 지닌 충돌분사류에 대한 유동특성을 연구하 기 위하여 단순화된 실험모델로써 형상이 동일한 두 원형분류의 충돌에 의한 충돌분류 의 혼합현상 및 유동구조 등을 질량유량비의 변화에 따라 유체역학적으로 구명하고자 하였으며, 본 연구 결과는 연소기관에서의 연소효율 증대 및 구조개선등의 공학적 응 용을 위한 기본자료로 활용하고, 이론적 연구에 의한 난류의 유동구조 및 유동특성 에 대한 타당성 입증과 이론적 모델의 보완을 위한 실험자료로 이용하고자 한다. 충돌유동에 영향을 미치는 주요인자는 노즐직경, 충돌각, 충돌질량유량비, 온도, 밀도 등이며, 이 인자들 중에서 충돌질량유량비와 출돌각이 충돌후 형성되는 난류혼합유동 에 지배적인 영향을 미치므로, 본 연구에서는 두 원형분류의 충돌질량유량비를 가변할 수 있는 장치를 고안하였으며, 두 분류의 충돌각을 45˚로 고정하고, 고속측과 저속측 노즐의 질량유량비를 1.0, 0.8, 0.6, 0.4로 설정하여 질량유량비에 따른 혼합 유동구 조의 구명을 위한 실험적인 연구를 수행하였다. 충돌후의 혼합유동의 특성을 연구하 기 위하여 유동중심궤적, 유동반폭, 유동단면, 2차원 및 3차원 유동장, 평균속도분포 등을 온라인 컴퓨터시스템을 이용하여 측정분석하였다.