• 한국분무공학회지
• /
• 제10권3호
• /
• pp.38-44
• /
• 2005

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced from the injector of DIS(Direct Injection Spark Ignition) engine is of paramount importance in DISI engines. Fan-spray injector as well as swirl-spray injector was developed and utilized to the DISI engines. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engineer. The direct Mie scattered images presented the macroscopic view of the liquid spray fields interacted with crossflow. Particle sizes of fuel droplets were measured with phase Doppler anemometer(PDA) system. A faster cross-flow field made SMD larger and $D_{10}$ smaller. The experiments show the interaction of air flow field and the fuel spray field of fan-spray. The results can be utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1229-1237
• /
• 1998

Experiments of shock-wave/turbulent boundary layer interaction were conducted by using a supersonic wind tunnel. Nominal Mach number was varied in the range of 1.6 to 3.0 by means of different nozzles. The objective of the present study is to investigate the effects of boundary layer suction on normal shock-wave oscillations caused by shock wave/boundary layer interaction in a straight duct. Two-dimensional slits were installed on the top and bottom walls of the duct to bleed turbulent boundary layer flows. The bleed flows were measured by an orifice. The ratio of the bleed mass flow to main mass flow was controlled below the range of 11 per cent. Time-mean and fluctuating wall pressures were measured, and Schlieren optical observations were made to investigate time-mean flow field. Time variations in the shock wave displacement were obtained by a high-speed camera system. The results show that boundary layer suction by slits considerably reduce shock-wave oscillations. For the design Mach number of 2.3, the maximum amplitude of the oscillating shock-wave reduces by about 75% compared with the case of no slit for boundary layer suction.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.61-67
• /
• 1994

Rate of rise heat detectors that respond to the heat generated in fire plume and alarm when the temperature reaches a specified point, give a great influences to the loss of life and property according to their reaction sensitivity. In this study, simple equations were derived which can be predicted the response time and temperature of the rate of rise heat detector with the results of hot wind tunnel tests and compartment fire experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.538-544
• /
• 2009

A vibration excitation system was designed and built of forced vibration experiments for using stepping motor and load cell. The identified flutter derivatives of the thin-plate acrylic model were very close to the analytical results of the idealized plate presented by Theodorsen. Five types of sectional models were tested in the wind tunnel using the proposed forced vibration method. To investigate the frequency, amplitude and angle of attack effects on flutter derivatives.

• Wind and Structures
• /
• 제30권6호
• /
• pp.617-631
• /
• 2020

Wake-induced aerodynamics of yawed circular cylinders with smooth and grooved surfaces in a tandem arrangement was studied. This pair of cylinders represent sections of stay-cables with smooth surfaces and high-voltage power conductors with grooved surfaces that are vulnerable to flow-induced structural failure. The study provides some insight for a better understanding of wake-induced loads and galloping problem of bundled cables. All experiments in this study were conducted using a pair of stationary section models of circular cylinders in a wind tunnel subjected to uniform and smooth flow. The aerodynamic force coefficients and vortex-shedding frequency of the downstream model were extracted from the surface pressure distribution. For measurement, polished aluminum tubes were used as smooth cables; and hollow tubes with a helically grooved surface were used as power conductors. The aerodynamic properties of the downstream model were captured at wind speeds of about 6-23 m/s (Reynolds number of 5×10⁴ to 2.67×10⁵ for smooth cable and 2×10⁴ to 1.01×10⁵ for grooved cable) and yaw angles ranging from 0° to 45° while the upstream model was fixed at the various spacing between the two model cylinders. The results showed that the Strouhal number of yawed cable is less than the non-yawed case at a given Reynolds number, and its value is smaller than the Strouhal number of a single cable. Additionally, compared to the single smooth cable, it was observed that there was a reduction of drag coefficient of the downstream model, but no change in a drag coefficient of the downstream grooved case in the range of Reynolds number in this study.

• 한국전산구조공학회논문집
• /
• 제31권6호
• /
• pp.309-314
• /
• 2018

트윈 빌딩의 풍하중의 특성과 구조적 특성은 일반 고층건물보다 복잡하다. 이러한 특성을 조사하기 위해서 풍동실험을 통해서 트윈 빌딩의 풍압을 계측하였다. 계측된 데이터와 적합 직교 분해 기법을 이용하여 풍압의 패턴을 파악하였다. 1차 모드에서는 채널링 효과가 2차 모드에서는 와류 효과가 나타났다. 또한, 두 빌딩의 하중의 상관관계를 파악하였는데, 풍 방향 하중은 양의 상관관계를 가지며, 풍 직각 방향의 하중은 명확한 상관관계가 나타나지 않았다. 이러한 상관관계는 횡 방향 변위에도 영향을 미쳤다. 양의 상관관계를 가지면 트윈 빌딩을 연결하는 구조부재의 영향이 적게 작용한 반면에 음의 상관관계를 가지면 연결 구조부재의 영향이 횡 방향의 변위를 줄이는데 큰 영향을 미치게 되었다.

• 한국농공학회논문집
• /
• 제59권4호
• /
• pp.109-117
• /
• 2017

Coastal reclamation has created large flat lands, part of which is an attractive site to construct greenhouse complexes for the horticulture industry. Wind environments over these coastal lands are entirely different from those of the inland area, and demand increased structural safety. The objective of this study is to evaluate the structural safety of two single-span greenhouses, peach type and even-span type, under the wind characteristics of coastal reclaimed lands. The wind pressure coefficients acting on the walls and roofs of two greenhouses were measured by wind tunnel experiments, and those acting on the roofs were approximately two times larger than those suggested by the existing design guidelines. Consequently, structural analysis conducted by SAP2000 showed that greenhouse structures designed by the existing guidelines might lead to structural failure under coastal wind conditions because their maximum allowable wind speeds were lower than the design wind speed. Especially, the peach type greenhouse constructed in a reclaimed land could be damaged by approximately 48 % of the design wind speed and needed improvement of structural designs. This study suggested increasing the spacing of rafters with thicker pipes for the peach type greenhouse to enhance economic feasibility of the building under strong wind conditions of reclaimed lands.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.79-86
• /
• 2018

Unlike other types of outdoor advertisements, rooftop signboards are installed on the roofs of buildings, rather than on their outer walls. This means that the area of a rooftop signboard is commonly larger than that of a general outdoor signboard. Moreover, as such signboards are greatly influenced by the wind, they can suffer a lot of damage from typhoons and strong winds every year. However, there is no wind load specification for rooftop signboards. In this study, wind pressure experiments were conducted to investigate the peak wind pressure on each side of rooftop signboards installed on the roofs of 5-15 story buildings in a city center. The minimum peak wind pressure coefficient was -3.0 at the bottom edges of the front and back of the rooftop signboards and -2.0 along the entire length of the sides. As the height of the rooftop signboard increased with the increasing height of the buildings, the peak value was found to be larger than the absolute peak value for the minimum peak wind pressure coefficient. The maximum and minimum peak wind pressure distributions of the rooftop outdoor signboards were influenced by the position of the signboard and the wind angle.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.21-30
• /
• 2008

이 연구에서는 현수교 PWS 및 CFRC 행어로프의 바람에 의한 내풍안정성 평가을 위한 풍동실험을 수행하였다. 풍동실험결과, PE관으로 피복된 PWS 케이블은 단일 케이블에서 와류진동이 발생하고 복수 케이블에서는 중심간격이 $3\sim6D$일때 웨이크갤로핑이 발생하였다. 진동이 발생하지 않는 복수 케이블에서도 풍향각이 달라지면 웨이크갤로핑이나 웨이크플러터가 발생함을 알 수 있었다. CFRC 케이블은 케이블 중심간격 및 풍향각에 관계없이 PWS 케이블에 비해 안정된 내풍성능을 보였다.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.537-543
• /
• 2016

KF-16의 1/33 축소 모형 공력 데이터베이스를 기반으로 풍동실험에 적응적 실험설계법을 적용하는 경우 실험의 정확도뿐만 아니라 풍동 실험에 소요되는 비용을 최소화할 수 있도록 추가 실험점 선택 방법에 대한 연구를 수행하였다. 라틴방격법을 이용하여 초기실험점을 선택하였고, Gaussian Process를 통해 불확실성이 가장 크면서도 실험에 소요되는 비용이 상대적으로 적은 추가 실험점을 선택하였다. 공력계수 모델링은 가장 비선형성이 큰 피칭모멘트계수를 정확히 모델링 하는 것을 목표로 하였다. 실험 비용을 고려한 적응적 실험설계법을 적용한 경우, 기존의 적응적 실험설계 방법론에 비해 모델의 정확도와 실험에 소요되는 비용에 어떤 영향을 미치는지 알아보았다.