• Korean journal of applied entomology
• /
• v.27 no.4
• /
• pp.200-210
• /
• 1988

ABSTRACT Brown planthopper collection data by 151 light traps located throughout the southern part of Korean peninsula for 7 years from 1981 thru 1987 were analysed with each immigration wave in relation to daily weather charts when the immigration occurred, and summarized as below. 1) Most of the main immigration took place during the mid and late July, though there were some variations from year to year. 2) Number of the BPH collected at one time, and the number of the area where those immigrants where collected were increased when it occurred closer to the end of July. 3) Weather conditions when the immigration took place were divided into 4 types; (a) depression with stationary front passed over the central peninsula (A type, 12 times); (b) depression with stationary front passed over the southern sea (B type, 5 times); (c) stationary front passed over the central peninsula(C type, 7 times); (d) without depression and stationary front (D type, 2 times). 4) Whatever the types of the weather, those immigrations started to land from south-west part of the peninsula, and those numbers of immigrants were also grater at those south-western areas. 5) When common weather factors were counted from each weather chart of the days when thcse immigrations took place, presence of wind from south-west was 26 times, presence of stationary front was 24 times, and presence of depression was 17 times out of all 26 cases of immigration. 6) Therefore, it could be concluded that the immigration of the BPH into Korea is simply accompanied by the north$.$easterly flowing air currents, connected from south-east part of China through Korean peninsula. And other factors seem to be related with inducing their landing.anding.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.383-390
• /
• 2019

A helideck is one of the essential structures in offshore platforms for the transportation of goods and operating personnel between land and offshore sites. As such, it should be carefully designed and installed for the safety of the offshore platform. In this study, a structural design optimization method for a lightweight offshore helideck is developed based on a genetic algorithm and an attainable design set concept. A helideck consists of several types of structural members such as plates, girders, stiffeners, trusses, and support elements, and the dimensions of these members are typically pre-defined by manufacturers. Therefore, design sets are defined by collecting the standard section data for these members from the American Institute of Steel Construction (AISC), and integer section labels are assigned as design variables in the genetic algorithm. The objective is to minimize the total weight of the offshore helideck while satisfying the maximum allowable stress criterion under various loading conditions including self-weight, wind direction, landing position, and landing condition. In addition, the unity check process is also utilized for additional verification of structural safety against buckling failure of the helideck.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.559-563
• /
• 2015

Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.23-39
• /
• 1998

The clinical data and thermographic imaging were analyzed on the 100 cases of Bell's palsy who were treated in the Kwang-Ju Oriental Medical Hospita! of Wonkwang University from February to October 1997. All the cases were taken Digital Infrared Thermograph Imaging(DITI) before treatment and 30 cases of them were taken follow up imaging again after recovery. And the following results were obtained. 1. Of 100 cases, under teenager occupied $1\%,\;teenager\;8\%,\;2nd\;decade\;14\%,\;3rd\;decade\;11\%,\;4th\;decade\;16\%,\;5th\;decade\;26\%,\;6th\;decade\;16\%,\;7th\;decade\;7\%\;and\;over\;80\;occupied\;1\%$. 2. Male occupied $48\%$ and female occupied $52\%$. 3. $42\%\;of\;male\;and\;23\%$ of female had the affected side at left side. And right facial nerve palsy occured at $29\%\;of\;male\;and\;29\%$ of female. 4. The most common cause of Bell's palsy was cold wind $18\%$, and the next were excessive labor $15\%,\;stress\;12\%,drinking\;2\%\;and\;cold\;food\;1\%$. 5. Thermal pattern were present as hyperthermal pattern in $44\%$ and hypothermal pattern in $22\%$. 6. The DITI showed hyperthermal pattern as close as to the onset day and changes to hypothermal pattern as times passed. 7. The DITI pattern and post-auricular pain, the most common prodomal syndrome, showed no significant relationship. 8. The relationship between the grade of paralysis and thermal patttern of DITI showed no significance. 9. Mean temperature of loci in affected side indicrtted $30.27^{\circ}C\;at\;Yang\;baek,\;30.02^{\circ}C\;at\;Taeyang,\;29.25^{\circ}C\;at\;Geoyo,\;29.62^{\circ}C\;at\;Jichang,\;29.78^{\circ}C\;at\;Hakwan,\;29.61^{\circ}C\;at\;Hyupgeo,\;and\;30.59^{\circ}C$at Yeopoong. 10. Mean temperature of loci in unaffected side showed $30.16^{\circ}C\;at\;Yang\;baek,\;30.02^{\circ}C\;at\;Taeyang,\;29.61^{\circ}C\;at\;Geoyo,\;29.68^{\circ}C\;at\;Jichang,\;29.70^{\circ}C\;at\;Hakwan,\;29.57^{\circ}C\;at\;Hyupgeo,\;and\;29.89^{\circ}C$at Yeopoong. 11. Of 30 cases who were taken follow up imaging again after recovery, the relationship between delta T at loci and symptoms showed no significance. It should be needed further investigation in order to apply them for clinical evaluation.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.215-220
• /
• 2010

Aerosol observation with Raman LIDAR in NIES (National Institute for Environmental Studies, Japan) LIDAR network was conducted from 17 April to 12 June 2008 over Beijing, China. The aerosol optical properties derived from Raman LIDAR were compared with the retrieved data from sun photometer and sky radiometer observations in the Aerosol Robotic Network (AERONET). The comparison provided the complete knowledge of aerosol optical and physical properties in Beijing, especially in pollution and Asian dust events. The averaged aerosol optical depth (AOD) at 675 nm was 0.81 and the Angstrom exponent between 440 nm and 675 nm was 0.99 during experiment. The LIDAR derived AOD at 532 nm in the planetary boundary layer (PBL) was 0.48, which implied that half of the total AOD was contributed by the aerosol in PBL. The corresponding averaged LIDAR ratio and total depolarization ratio (TDR) were 48.5sr and 8.1%. The negative correlation between LIDAR ratio and TDR indicated the LIDAR ratio decreased with aerosol size because of the high TDR associated with nonspherical and large aerosols. The typical volume size distribution of the aerosol clearly demonstrated that the coarse mode radius located near 3 ${\mu}m$ in dust case, a bi-mode with fine particle centered at 0.2 ${\mu}m$ and coarse particle at 2 ${\mu}m$ was the characteristic size distribution in the pollution and clean cases. The different size distributions of aerosol resulted in its different optical properties. The retrieved LIDAR ratio and TDR were 41.1sr and 19.5% for a dust event, 53.8sr and 6.6% for a pollution event as well as 57.3sr and 7.2% for a clean event. In conjunction with the observed surface wind field near the LIDAR site, most of the pollution aerosols were produced locally or transported from the southeast of Beijing, whereas the dust aerosols associated with the clean air mass were transported by the northwesterly or southwesterly winds.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.4 s.32
• /
• pp.137-145
• /
• 2006

Calculating non-working days is very important element for the accurate estimation of construction time. And non-working days are largely affected by weather factors such as rainfall, wind velocity, snowfall and temperature. In the case of concrete works, there are lots of referable information for the calculation of non-working days due to the weather factors. However, for the structural steel works, there are very limited information only. Through literature survey and interviews with a few engineers, this paper established the weather factors that affect steel structural works and the impact of those factors. Based on the factors and the expected impact of the factors together with the weather data during the last 15 years in Seoul region gathered from Korea Meteorological Administration, this paper suggests the monthly non-working day of structural steel work due to weather factors. This information can be used for the early estimation of construction time.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.63-69
• /
• 2014

Analysis frequency spectrum through observed wave data in northeastern shore, jeju island, during winter and fall, and review wave characteristics. In order to compute maximum wave height, we calculate the ratio of significant wave height to maximum wave height using the linear regression equation. In addition, for calculating JONSWAP spectrum, we assumed ${\gamma}$ value using significant wave height and peak frequency in the observation area. Consequently, the highest frequency is below 1 m in the case of significant wave height and during the first observation, the mean of height was estimated at 0.523 m and during the scend observation, it was 0.423 m. Furthermore, in peak frequency, the highest frequency was 0.12 Hz~0.15 Hz (period is nearly 6.67s~8.33s), the results of ${\gamma}$ from using significant wave height and peak frequency is 2.72 and the significant wave height calculated by straight linear regression equation was $1.635H_s$.

• Journal of Pharmacopuncture
• /
• v.9 no.2
• /
• pp.49-65
• /
• 2006

Objective : The purpose of this study is to investigate nucleotide sequence and extract cytotoxicity of Scolopendrae corpus. The nature and taste of Scolopendrae corpus is hot, Warm and toxic, and the effect of this is dispelling wind, anti-spasmodic action and detoxication so it has been used for C.V.A, facial palsy, sensory disorder at extremities, wounds and arthritis. Methods : Scolopendrae corpus were collected by locality on the market. They were morphologically classified. Their nucleotide sequence was investigated and compared among them. In addition, the water-alcohol extract cytotoxicity of them was studied by MTT-based cytotoxicity assay. Results : It was shown that the each Scolopendrae corpus by locality is almost identical at genetic result and is identified as Scolopendra subspinipes mutilans L. Koch. Nucleotide sequence of Scolopendra subspinipes mutilans L. Koch in this study will help to discriminate other species of Scolopendrae corpus. The water-alcohol extract of Scolopendra subspinipes mutilans L. Koch did not induce cytotoxicity on Hep G2, L929 cell and peritoneal macrophages. Besides, it did not influence nitrite production of peritoneal macrophages. These results can be used as basic data for genetic discrimination with another species of scolopendrae corpus.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.373-381
• /
• 2015

As offshore structures such as offshore wind and offshore platforms have been installed frequently in ocean, scour effects are considered important. To test the scour effect, numerical simulation of scour has been carried out. However, the test was usually conducted under the uni-directional flow without bi-directional current flow in western sea of Korea. Thus, in this paper, numerical simulations of scour around offshore jacket substructure of HeMOSU-1 installed in western sea of Korea are conducted using FLOW-3D. The conditions are uni-directional and bi-directional flow considering tidal current. And these results are compared to measured data. The analysis results for 10,000 sec show that under uni-directional conditions, maximum scour depth was about 1.32 m and under bidirectional conditions, about 1.44 m maximum scour depth occurred around the structure. Meanwhile, about 1.5~2.0 m scour depths occurred in field observation and the result of field test is similar to result under bi-directional conditions.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.151-158
• /
• 2010

In order to measure the deposition velocity of $I_2$ vapor for radish plants and its translocation factor for their roots, radish plants were exposed to $I_2$ vapor for 80 min. at different growth stages between 29 and 53 d after sowing. The exposure was performed in a transparent chamber during the morning time. Deposition velocities ($ms^{-1}$) were on the whole in the range of $1.0{\times}10^{-4}{\sim}2.0{\times}10^{-4}$ showing an increasing tendency with an increase in the biomass density. The results showed some agreement with existing reports that a higher relative humidity would lead to a higher deposition velocity. The acquired deposition velocities were lower than by factors of several tens than some field measurements probably due to a very low wind speed (about $0.2\;ms^{-1}$) in the chamber. Translocation factors (ratio of the total iodine in the roots at harvest to the total plant deposition), estimated in a more or less conservative way, were $1.3{\times}10^{-3}$ for an exposure at 29 d after sowing and $5.0{\times}10^{-3}$ for an exposure at 53 d after sowing. In using the present experimental data, meteorological conditions and chemical and physical forms of iodine need to be carefully considered.