• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.53-81
• /
• 2000

The purpose of this study is to examine the chracteristics of the location of Zen Buddhist temples which are the Nine-Mountain Sects of Zen(九山禪門) from feng-shui perspective. A large number of temples have been built for about 1600 years since Buddhism had influenced on Korea. They have been built nationwide in different times by different sects of Buddhism. The pattern of location of Buddhist temples is different according to background of the times (political, economic, cultural aspect) and of tenet(difference in sects of Buddhism) when the temples were built. But the general location of Korean Buddhist temples is in accordance with feng-shui theory. Feng-shui is a traditional geographic thought in China and Korea. It is necessary to understand feng-shui in order to understand Korean landscape and cultural geography. It had given a tremendous impact on Korean landscape through choosing site of cities, settlements, houses, mounments, temples, pagodas, and so on. Before feng-shui was prevailing in Korea, Buddhist temples were mostly built on sacred place which was connected with folk beliefs. In the case of the late Silla Dynasty when Zen Buddhism was prevailing, feng-shui became popular and many. temples were built in accordance with feng-shui. The typical examples are found in the site of Nine-Mountain Sects of Zen temples. The interpretation of geomantic site of Nine-Mountain Sects of Zen temples will show us how feng-shui was applied to and reflected in the Korean peninsula. In Zen Buddhism, feng-shui was applied to the choice of the temple site. Also feng-shui theory was usually used to choose the site of stupa(Budo) where the remains of the founder of sect. In this study, I will interpret the geomantic characteristics of Nine-Mountain Sects of Zen temples. The geomantic interpretations of the temples are as follow. 1. The temples are located at the foot of a hill with surrounding mountains and a watercourse in front. Feng-shui texts often describe it as an ideal site. This geomantic situation is well equipped with natural drainage; protection from cold wind from the north or evil spirits; a good view with open space to the front; protection from unnecessary weather damage; and security and protection from strangers and invaders. 2. The sitting and facing direction of the temples correspond to the oncoming dragon's direction. 3. Many feng-shui texts discuss the types of Sa(surrounding mountains) in detail and morphologically describe them with certain animate and inanimate auspicious objects. In case of Nine-Mountain Sects of Zen temples, the geomantic landscape of these can be compared to auspicious objects. This is morphological marker for the description of configulation features of these temples. 4. Most auspicious places are not perfect, but the shortcomings can be overcome by many means. We can observe modification of landscape for the purpose of fulfilling the geomantic harmony of the temple.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.1
• /
• pp.4323-4337
• /
• 1977

The study was to estimate the effect of the rise of water temperature in the warm water pool and to make contribution to the establishment of reducing to a damage of cool water as well as to the planning for warm water pool. This observation was performed in Wudu warm water pool located at Wudu-Dong of Chuncheon for two years from 1975 to 1976. The results were showed as follows; 1. The daily variation of water temperature was the least for inset (No.1; 0.6$^{\circ}C$) the second for middle overflow (No2: 3$^{\circ}C$, No.3; 2.3$^{\circ}C$) and another for outflet (No.4; 3.6$^{\circ}C$, No.5; 3.8$^{\circ}C$) And the highest reaching time of water temperature in each block was later about 1 hour than the time at which air temperature happend in the daytime. So, the variation of water temperature was sensitive to the variation of air temperature 2. The monthly variation of water temperature at each measuring point was plotted to be increased with increase in air temperature till August (Mean monthly rising degree; No.1; 1.15$^{\circ}C$, No.2; 1.7$^{\circ}C$, No.3; 1.73$^{\circ}C$, No.4; 2.08$^{\circ}C$, No.5; 2.0$^{\circ}C$), and expressed gradually descended influence upon water temperature after August. 3. The mean temperature of inflow folwed in warm Water pool was 7.5∼12.5$^{\circ}C$, and outflow temperature was described as 13.4∼22.5$^{\circ}C$ to be climbed. And So, the rising interval of water temperature was shown as 6.7∼10.4$^{\circ}C$. 4. The correlation between the rising of water temperature and the weather condition was found out highly significant. As the result, their correlation coefficents of water temperature depending on mean air temperature, ground temperature, wind velocity and relative humidity were to be 0.93, 0.90, - 0.83 and 0.71 respectively. But there was no confrimation of the correlation on the clouds, sunlight time, volume of evaporation, and heat capacity of horizontal place. 5. The water temperature of balance during the period of rice growing in Chuncheon district was shown as table 10, and the mean of whole period was calculated as about 23.7$^{\circ}C$. 6. The observed value of the outflow temperature passed through the warm water pool was higher than that of computed, the mean difference between two value was marked as 1.15$^{\circ}C$ for blockl, 1.18$^{\circ}C$ for block2, and 0.47$^{\circ}C$ for block3, respectivly. Therefore, the ratio on the rising degree between the observed and computed were shown as 53%, 44%, and 18%, mean 38% through each block warm water pool (referring item $\circled9$ of table 11,12, and 13). Accordingly, formula (4) in order to fit for each block warm water pool was transfromed as follow; {{{{ { theta }_{w } - { theta }_{ 0} =[1-exp LEFT { { 1-(1+2 varphi )} over {cp } CDOT { A} over { q} RIGHT } ] TIMES ( { theta }_{w } - { theta }_{ 0}) TIMES C }}}} Here, correction coefficinent was computed 1.38, and being substituted 1.38 for C in preceding formula, the expected water temperature will be calculated to be able to irrigate the rice paddy. As the result, we can apply the coefficient in order to plan and to construct a new warm water pool.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.628-636
• /
• 2018

Because large buoys are mainly made of steel, they are heavy and vulnerable to corrosion by sea water. This makes buoy installation and maintenance difficult. Moreover, vessel collision accidents with buoys and damage to vessels due to the material of buoys (e.g., steel) are reported every year. Recently, light buoys adopting eco-friendly and lightweight materials have come into the spotlight in order to solve the previously-mentioned problems. In Korea, a new lightweight buoy with a 7-Nautical Mile lantern adopting expanded polypropylene (EPP) and aluminum to create a buoyant body and tower structure, respectively, was developed in 2017. When these light buoys are operated in the ocean, the visibility and angle of light from the lantern installed on the light buoys changes, which may cause them to function improperly. Therefore, research on the performance of light buoys is needed since the weight distribution and motion characteristics of these new buoys differ from conventional models. In this study, stability estimation and motion analyses for newly-developed buoys under various environmental conditions considering a mooring line were carried out using ANSYS AQWA. Numerical simulations for the estimation of wind and current loads were performed using commercial CFD software, Siemens STAR-CCM+, to increase the accuracy of motion analysis. By comparing the estimated maximum significant motions of the light buoys, it was found that waves and currents were more influential in the motion of the buoys. And, the estimated motions of the buoys became larger as the sea state became worser, which might be the reason that the peak frequencies of the wave spectra got closer to those of the buoys.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.26-31
• /
• 1978

The objective of the present study was to investigate the effect of nicotine-contaminated mulberry-leaf, which was grown in the vicinity of tobacco drying plant (TDP), on cocoon crop. Mulberry-leaf harvested from the field at Sericultural Experiment Station (SES), Suweon, Korea, was used as control, supposedly nicotine-free leaf. Leaf harvested from the field in the distances of 30-50m, 300-400m and 700-800m from TDP was fed during the whole larval stage of the silkworm at. SES. The effect of leaf in each treatment level on the quantitative characters of the silkworm was summarized as follows; 1. Larval duration from 4th instar on was significantly longer in the TDP-leaf treatments than for the control. 2. Duration of matured silkworm appearance became longer as the distance of the mulberry-field from TDP got shorter, because the larval duration and growth of the silkworm were not uniform in the TDP-leaf treatments. 3. Mortality rates during the late larval, cocoon spinning, and pupal stages were highest for the 30-50m leaf, especially mortality rates during the late larval and pupal stage were serious. 4. Pupation rate was lowest for the 30-50m leaf and those for the 300-400m and the 700-800m leaf were not significantly different from that of the control. 5. Nicotine damage to cocoon weight and cocoon shell weight was significant in each TDP-leaf level. Cocoon shell ratio was reduced at the same extent in each level, compared with the control. 6. The ratio among cocoon-classes was significantly different between treatments, compared with best-cocoon ratio of 87.1% for the control. Cocoons were not uniform for the 30-50m leaf, and those for the 300-400m and the 700-800m leaf were as almost uniform as those for the control. 7. Loss of fresh cocoon yield became greater as the distance of the mulberry-field from the TDP-got shorter. In conclusion, the critical distance of mulberry-field, which influences larval health, cocoon quality and yield, appeared to be 800m from the TDP. Such other factors as wind direction and topographic location may be involved in the critical distance. 8. From the present experiment, we could obtain only the effect of nicotine on the silkworm through digestive system, since the silkworm was raised at SES in Suweon. If the silkworm.. were raised in the vicinity of the TDP, poison effect of nicotine on the silkworm could beo expected through exoskeleton and tracheal system as well as through digestive system.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.903-916
• /
• 2021

An area's topography refers to the shape of the earth's surface, described by its elevation, slope, and aspect, among other features. The topographical conditions determine energy flowsthat move water and energy from higher to lower elevations, such as how much solar energy will be received and how much wind or rain will affect it. Another common factor, the topographic wetness index (TWI), is a calculation in digital elevation models of the tendency to accumulate water per slope and unit area, and is one of the most widely referenced hydrologic topographic factors, which helps explain the location of forest vegetation. Analyses of topographical factors can be calculated using a geographic information system (GIS) program based on digital elevation model (DEM) data. Recently, a large number of free open source software (FOSS) GIS programs are available and developed for researchers, industries, and governments. FOSS GIS programs provide opportunitiesfor flexible algorithms customized forspecific user needs. The majority of biodiversity in island areas exists at about 20% higher elevations than in land ecosystems, playing an important role in ecological processes and therefore of high ecological value. However, island areas are vulnerable to disturbances and damage, such as through climate change, environmental pollution, development, and human intervention, and lacks systematic investigation due to geographical limitations (e.g. remoteness; difficulty to access). More than 4,000 of Korea's islands are within a few hours of its coast, and 88% are uninhabited, with 52% of them forested. The forest ecosystems of islands have fewer encounters with human interaction than on land, and therefore most of the topographical conditions are formed naturally and affected more directly by weather conditions or the environment. Therefore, the analysis of forest topography in island areas can be done more precisely than on its land counterparts, and therefore has become a major focus of attention in Korea. This study is focused on calculating the performance of different topographical factors using FOSS GIS programs. The test area is the island forests in Korea's south and the DEM of the target area was processed with GRASS GIS and SAGA GIS. The final slopes and TWI maps were produced as comparisons of the differences between topographic factor calculations of each respective FOSS GIS program. Finally, the merits of each FOSS GIS program used to calculate the topographic factors is discussed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.104-115
• /
• 1992

The rice culture techniques included 'Jodosukyungbeob'(旱稻水耕法 : culture techniques of early-ripening paddy rice), 'Mandosukyungbeob' (晩稻水耕法) : culture techniques of late-Ripening paddy rice 'Handobeob'(旱稻＆lt;山稻＆gt;法 : culture techniques of upland rice), 'Myojongbeob'(苗種法 : culture techniques of paddy rice by transplanting), 'Kunangbeob'(乾秧法 : culture techniques of rice by transplanting which rears seeding in dry paddy) and 'Sudogunpanongbeob'(水稻乾播農法 : culture techniques of paddy rice seeding in dry field). Especially, 'Kunangbeob' and 'Sudogunpanongbeob' were originally developed in Korea as seen in 1600s(Kyoungje : 經濟) and early 1800s (Yoji : 要旨). In 'Jodosukyungbeob' it took 9 days for seed dipping, water-sprouting and prevent damage by birds, each for 3 days in China, but in Korea seed dipping in water took 3 days and the rest of the procedures were flexibly established. In matured soils, practices were fall plowing right after harvest, recognition of effective tillering and additional fertilization use of human manure, and stimulation of sprouting by lime application. The unique culture techniques adequate for Korean situations were practiced, which included weed control after draining accurately for 3 to 4 times, draining at mid season for improving wind and drought tolerance, rice harvesting at appropriate time for preventing grain shattering, and seeding in rows. 'Mandosukyungbeob' was improved techniques contrast to those of China, and the major contents were selection of proper varieties, good stand establishment by seeding high rates, induction of vigorous tillers, and adoption of 'Jokjongbeob'(足種法 : seeding method by foot). Also, one of the most prominent rice cultures by our ancestors was 'Kunpanongbeob' that was systemized form habitual practice of Pyongan Province. The unique technique actualized was 'Hando [旱稻(山稻)]' culture technique which was the combinations of 'Jokjongbeob', root stimulation method, and disaster-tolerant mixture cropping with adoptation of variety theory, although it was originated from China. The transplanting techniques has come before 'Jikseol'($\ulcorner$直說$\lrcorner$) and its merits were sufficiently realized. However, this method was basically prohibited from the early Chosun dynasty because extremely bad harvest was expected under drought conditions and insufficient conditions of water storage. But, it was permitted in the areas that contained water all the times and in case of large-scale farming especially. Most of rice culture was transplanted in the end of the Chosun dynasty because transplanting was continuously spreaded in the three southern provinces of Korea. Under these circumstances, transplanting technique was improved from the early to the end of the Chosun dynasty by weed control, fertilizing, water management, and quadratic transplanting. Based on these techniques, agricultural productivity was improved 5 times by that time. 'Kunpanongbeob' was created and developed properly for Korean conditions that is dry in early season and flooding in late season. This was successively developed and established into transplanting technique of nursery seedling.

• Research in Plant Disease
• /
• v.29 no.1
• /
• pp.23-38
• /
• 2023

The fire blight caused by Erwinia amylovora (Ea) is a devastating disease of Rosaceae plants, including commercially important apple and pear trees. Since the first report in Korea in May 2015, it has been spreading to neighboring regions gradually. Host plants can be infected by pollinators like bees, rainfall accompanied by wind, and cultural practices such as pruning. Many studies have revealed that wild Rosaceae plants such as Cotoneaster spp., Crataegus spp., Pyracantha spp., Prunus spp., and Sorbus spp. can be reservoirs of Ea in nature. However, wild Rosaceae plants in Korea have not been examined yet whether they are susceptible to fire blight. Therefore, the susceptibility to fire blight was examined with 25 species in 10 genera of wild Rosaceae plants, which were collected during 2020-2022, by artificial inoculation. Bacterial suspension (10⁸ cfu/ml) of Ea type strain TS3128 was inoculated artificially in flowers, leaves, stems, and fruits of each plant species, and development of disease symptoms were monitored. Moreover, the presence of Ea bacteria from inoculated samples were checked by conventional polymerase chain reaction. Total 14 species of wild Rosaceae plants showed disease symptoms of fire blight, and Ea bacteria were detected inside of inoculated plant parts. These results suggest that wild Rosaceae plants growing nearby commercial apple and pear orchards in Korea can be Ea reservoirs, and thus they should be monitored regularly to minimize the damage by Ea infection and spreading.

• Journal of the Daesoon Academy of Sciences
• /
• v.41
• /
• pp.63-131
• /
• 2022

In the context of Daesoon Jinrihoe's The Canonical Scripture, 'Saving Lives' consists of one 44 verse-long chapter. The content covers Kang Jeungsan's authority and foreknowledge, and most of the passages are about the treatment of diseases. Other passages are about relief from natural disasters, the resolution of conflicts in personnel affairs, and wisdom as applied to saving lives. The treatment of diseases focuses on solving the ailments faced by lower classes during that time period. Kang Jeungsan relieved the damage suffered by the people from natural phenomena as caused by the three disasters which resulted from water, fire, and wind. He also worked to solve other difficulties experienced in human society. In addition, the definition of 'wisdom' here is one of being high-seeing and far-thinking in Saving Lives. That is the foundation upon which wisdom can save oneself and others. After comparing each chapter of The Canonical Scripture with the parallel verses from the 6th edition of Daesoon Jeongyeong, the results of this study can be summarized as follows: first, saving lives as performed by Kang Jeungsan became an unprecedented and absolute act of relieving the common people during a time when they were suffering from great harms, hardships, and difficulties in their daily lives during the late Joseon Dynasty. Second, the verses were distributed into seven parts to achieve the purpose indicated by the titles of each section which related to specific powers exhibited by Kang Jeungsan in his interactions with Heaven, Earth and Humanity. Third, the second chapter of 'Saving Lives' includes not only treatment of disease, natural disasters, and hardships, but also relief meant to lessen the burdens people experienced in their daily lives while living within the boundaries of society. This is different from the respective section from the 6th edition of Daesoon Jeongyeong which, by way of contrast, only contained verses concerning the treatment of disease. The contents of 'Saving Lives' in The Canonical Scripture deals with the relief in a wide range of applications and is thereby different from the chapter on healing from the Daesoon Jeongyeong, which merely dealt with the healing of diseases. Therefore, this broader range of meanings can be taken to be a unique feature of The Canonical Scripture.