• Radiation Oncology Journal
• /
• 제13권2호
• /
• pp.199-203
• /
• 1995

Purpose: To evaluate the dose under lung block as a function of depth and the effectiveness of a block as a function of block width. Materials and Methods : Field size of mantle field was $22.8{\times}32.4cm^2.$ Dose distribution of the mantle field was measured with two dimensional water phantom system. To analyze the effectiveness of the lung block. central axis plane, 5cm off-axis plane, and 10cm off-axis plane were studied. Results: The dose under the lung block was recorded with maximum at the depth between 5cm and 10cm. In the central axis plane, dosimetric block width was $10-15\%$ less than physical block width. In the 5cm off-axis plane, dosimetric block width was $4-9\%$ less than physical block width. In the 10cm off-axis plane, dosimetric block width was $2\%$ less than physical block width. Conclusion: Depth dependence of the dose under the lung block was founded. Also, block width dependence of the lung block was founded. To induce the accurate relation between the physical block width and the 'effective' block width, it needs more detailed understanding of the variables involved.

• 복식문화연구
• /
• 제5권4호
• /
• pp.112-129
• /
• 1997

This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth＋2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권2호
• /
• pp.102-109
• /
• 1997

전력부하 설비시스템에 장치하는 퍼지제어기의 성능은 제어대상의 변화에 민감하여 제어대상이 바뀔때마다 퍼지 소속함수폭이나 제어규칙을 조정해야 한다. 본 논문은 퍼지제어기의 성능에 영향을 미치는 요소들을 종합적으로 고찰하여, 제어대상의 변화에 적응하여 최적의 퍼지 소속함수폭에 자동동조하는 다층 신경회로망을 사용한 성능이 개선된 뉴로퍼지제어기를 제안하여 구성하였다. 이것을 다양한 일차지연요소를 갖는 설비시스템의 시뮬fp에션을 하여 우수한 제어 특성을 확인하였다.

• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.19-23
• /
• 1997

The conductance of a microscopic constriction in a two-dimensional electron gas is obtained as a function of both the constriction width and curvature. When the quantized conductance G at plateaus is given by the channel number Nc times the quantum unit 2e2/h, Nc is found to be a function of not only the width and but also the curvature. At a given W, Nc increases by one whenever the constriction curvature decreases by about a certain value. Until the shape smoothness becomes comparable to the two parallel boundaries, there exist more channels avaliable for conduction in a smaller-curvature constriction than in a larger-curvature one. This result is very interesting because Nc has been considered to depend on the width W only. this reflects that the number of the quantized transverse levels depend o both the constriction width and curvature in a two-dimensional electron gas.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.628-632
• /
• 2016

We studied experimentally and theoretically the vertical range of the confined electric field in the gap area of metamaterials, which was analyzed for various gap widths using terahertz time-domain spectroscopy. We measured the resonant frequency as a function of the thickness of poly(methyl methacrylate) in the range 0 to 3.2 μm to quantify the effective detection volumes. We found that the effective vertical range of the metamaterial is determined by the size of the gap width. The vertical range was found to decrease as the gap width of the metamaterial decreases, whereas the sensitivity is enhanced as the gap width decreases due to the highly concentrated electric field. Our experimental findings are in good agreement with the finite-difference time-domain simulation results. Finally, a numerical expression was obtained for the vertical range as a function of the gap width. This expression is expected to be very useful for optimizing the sensing efficiency.

• 대한수학회보
• /
• 제60권4호
• /
• pp.1017-1024
• /
• 2023

A celebrated result in the study of integer partitions is the identity due to Lehmer whereby the number of partitions of n with an even number of even parts minus the number of partitions of n with an odd number of even parts equals the number of partitions of n into distinct odd parts. Inspired by Lehmer's identity, we prove explicit formulas for evaluating generating functions for sequences that enumerate integer partitions of fixed width with an even/odd number of even parts. We introduce a technique for decomposing the even entries of a partition in such a way so as to evaluate, using a finite sum over q-binomial coefficients, the generating function for the sequence of partitions with an even number of even parts of fixed, odd width, and similarly for the other families of fixed-width partitions that we introduce.

• 물과 미래
• /
• 제29권4호
• /
• pp.139-147
• /
• 1996

유역의 하천형태학적 특성은 그 유역의 수문 및 수리학적특성과 밀접한 관계를 가지고 있다. 본연구는 우리나라 중부지방의 중소하천에 대한 계획하폭을 산정하는 공식을 제시하는데 목적이 있다. 계획홍수량과 유역면적 및 하천연장의 자료로서 하폭을 얻는데 다음과 같은 결론을 얻었다. : (1) 계획홍수량(Q)과 하폭(B)의 관계로 나타낸 하폭식은 $B=1.532A^{0.644.}$; (2) 유역면적(A)과 하폭(B)과의 관계로 나타낸 하폭식은 $B=12.392A^{0.511}$; (3) 하천연장(L)과 하폭(B)과의 관계로 나타낸 하폭식은 $B=10.509l^{0.852}$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1267-1270
• /
• 1998

This paper analyzes the characteristics of wide-band one-shot beam formed by using all sensors of array at once, as variation of weighting width. Gaussian function is applied to each sensor as a role of weighting. As the results of the simulation for nested linear array having 17 sensors for each octave, as the width goes wider the directivity index(DI) becomes lower but more even and the variation of beamwidth becomes smaller. It is confirmed, therefore, that weighting width is carefully decided in consideration of DI level, DI stability and the beamwidth.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.95-101
• /
• 2009

In case of manufacturing the high quality welds or pipeline, the full penetration weld has to be made along the weld joint. Thus the root pass welding is very important and has to be selected carefully. In this study, an experimental method for the selection of optimal welding condition was proposed in the root pass welding which was done along the V-grooved butt weld joint. This method uses the response surface analysis in which the width and height of back bead were chosen as the quality variables of the weld. The overall desirability function, which is the combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. In the experiments, the target values of the back bead width and the height are 6mm and zero respectively for the V-grooved butt weld joint of 8mm thickness mild steel. The optimal welding conditions could predict the back bead profile(bead width and height) as 6.003mm and -0.003mm. From a series of welding test, it was revealed that a uniform and full penetration weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.170-174
• /
• 2004

Despite the widespread use in the various manufacturing industries, the full automation of the robotic CO$_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this paper, an attempt has been made to develop an Radial basis function network model to predict the weld top-bead width as a function of key process parameters in the robotic CO$_2$ welding. and to compare the developed model and a simple neural network model using two different training algorithms in order to verify performance. of the developed model.