• Title/Summary/Keyword: width function

검색결과 1,019건 처리시간 0.04초

인조혈관대를 이용한 허혈성 승모판막 폐쇄부전의 수술적 치료 (Simple and Effective Surgical Repair with Vascular Graft Strip for Ischemic MR)

  • 민호기;이승훈;이주현;성기익;박계현;전태국;박표원;이영탁
    • Journal of Chest Surgery
    • /
    • 제36권9호
    • /
    • pp.646-650
    • /
    • 2003
  • 허혈성 승모판막 폐쇄부전에 대한 수술적 교정은 그간 많은 수기들이 보고되어 왔다. 본원에서는 인조혈관편을 이용한 후판막륜 성형술을 통하여 좋은 조기성적을 얻었기에 보고하고자 한다. 대상 및 방법 : 2001년 12월부터 2003년 1월까지 본원에서 허혈성 승모판막 폐쇄부전으로 진단받고 수술을 시행한 환자에서 유두근 파열에 의한 치환술 환자를 제외한 22명을 대상으로 하였고 남자는 13명이었다. 술 전 위험인자로는 저좌심실구출률(<35%)이 9예, 당뇨가 7예, 고혈압이 13예, 신부전(Cr>2.5 mg/dl)이 4예였다. 수술 수기는 좌심방이 작은 경우가 많은 이유로 승모판막의 노출을 용이하게 하기 위하여 상대정맥과 하대정맥에 각각 정맥캐뉼라를 삽관하고 양대정맥 위아래로 충분히 박리를 시행하였다. 약 6mm 두께의 인조혈관편으로 8∼10개의 단절 수평봉합뜨기를 이용하여 후판막륜을 줄여주었다(비대칭술이 14예, 대칭술이 8예). 동반 술기로는 관상동맥 우회로숭리 21예, Dor 술식이 3예, 삼첨판막 성형술이 1예, 미로술식이 1예, 대동맥-쇄골하동맥간 우회술이 1예 있었다. 결과: 수술 관련되어 사망은 1예가 있었고 이를 제외한 나머지 환자의 평균 역류지수는 2.95에서 0.88로 감소하였다. 그러나 술 전후로 평균 심실구출률은 별다른 변화는 없었다. 퇴원 직전 시행한 심초음파상 승모판막 폐쇄부전이 없었던 경우가 8예, 경미한 경우가 11예, 경도가 2예, 경도에서 중등도 사이가 1예 있었다. 결론: 인조혈관편을 이용한 후판막륜 성형술은 허혈성 승모판막 폐쇄부전의 치료에 있어서 안전하고 경제적인 방법으로 생각되며 향후 승모판막의 기능 평가를 위하여 장기간 추적 관찰이 필요할 것으로 생각된다.

Potential of River Bottom and Bank Erosion for River Restoration after Dam Slit in the Mountain Stream

  • Kang, Ji-Hyun;So, Kazama
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.46-46
    • /
    • 2011
  • Severe sediment erosion during floods occur disaster and economic losses, but general sediment erosion is basic mechanism to move sediment from upstream to downstream river. In addition, it is important process to change river form. Check dam, which is constructed in mountain stream, play a vital role such as control of sudden debris flow, but it has negative aspects to river ecosystem. Now a day, check dam of open type is an alternative plan to recover river biological diversity and ecosystem through sediment transport while maintaining the function of disaster control. The purpose of this paper is to verify sediment erosion progress of river bottom and bank as first step for river restoration after dam slit by cross-sectional shear stress and critical shear stress. Study area is upstream reach of slit check dam in mountain stream, named Wasada, in Japan. The check dam was slit with two passages in August, 2010. The transects were surveyed for four upstream cross-sections, 7.4 m, 34 m, 86 m, and 150 m distance from dam in October 2010. Sediment size was surveyed at river bottom and bank. Sediment of cobble size was found at the wetted bottom, and small size particles of sand to medium gravel composed river bank. Discharge was $2.5\;m^3/s$ and bottom slope was 0.027 m/m. Excess shear stress (${\tau}_{ex}$) was calculated for hydraulic erosion by subtracting the values of critical shear stress (${\tau}_{c}$) from the value of shear stress (${\tau}$) at river bottom and bank (${\tau}_{ex}=\tau-{\tau}_c$). Shear stress of river bottom (${\tau}_{bottom}$) was calculated using the cross-sectional shear stress, and bank shear stress (${\tau}_{bank}$) was calculated from the method of Flintham and Carling (1988). $${\tau}_{bank}={\tau}^*SF_{bank}((B+P_{bed})/(2^*P_{bank}))$$ where $SF_{bank}=1.77(P_{bed}/p_{bank}+1.5)^{-1.4}$, B is the water surface width, $P_{bed}$ and $P_{bank}$ are wetted parameter of the bed and bank. Estimated values for ${\tau}_{bottom}$ for a flow of $2.5\;m^3/s$ were lower as 25.0 (7.5 m cross-section), 25.7 (34 m), 21.3 (86 m) and 19.8 (150 m), in N/$m^2$, than critical shear stress (${\tau}_c=62.1\;N/m^2$) with cobble of 64 mm. The values were insufficient to erode cobble sediment. In contrast, even if the values of ${\tau}_{bank}$ were lower than the values for ${\tau}_{bottom}$ as 18.7 (7.5 m), 19.3 (34 m), 16.1 (86 m) and 14.7 (150 m), in N/$m^2$, excess shear stresses were calculated at the three cross-sections of 7.5 m, 34 m, and 86 m distances compare with ${\tau}_c$ is 15.5 N/$m^2$ of 16mm gravel. Bank shear stresses were sufficient for erosion of the medium gravel to sand. Therefore there is potential to erode lateral bank than downward erosion in a flow of $2.5\;m^3/s$. Undercutting of the wetted bank can causes bank scour or collapse, therefore this channel has potential to become wider at the same time. This research is about a potential of sediment erosion, and the result could not verify with real data. Therefore it need next step for verification. In addition an erosion mechanism for river restoration is not simple because discharge distribution is variable by snow-melting or rainy season, and a function for disaster control will recover by big precipitation event. Therefore it needs to consider the relationship between continuous discharge change and sediment erosion.

  • PDF

'파산서당'의 영건과정과 조경식물 변화상 탐색 (The Search for Study on the Construction Process and Changes in the Landscape Plants of the Pasanseodang)

  • 주빈;최하영;신상섭
    • 헤리티지:역사와 과학
    • /
    • 제51권1호
    • /
    • pp.48-65
    • /
    • 2018
  • 1874년 박규현이 기술한 '파산서당기'를 중심으로 분석한 파산서당의 영건과정과 조경식물의 변화상을 추적한 연구결과는 다음과 같다. 첫째, 대구 달성의 하빈면 묘리 파회에 자리한 살림집 삼가헌과 별당(파산서당)은 사육신 박팽년(1417~1456)의 11대손 박성수로부터 14대손 박규현에 이르기 까지 약 90년간(1783~1874)에 걸쳐 완성되었는데, 풍수적 회룡고미형(回龍顧尾形)으로 회자되는 길처이다. 둘째, 파회마을은 박성수가 1769년(영조 45)에 벗들과 교우하기 위해 초가를 짓고 자신의 호(삼가헌(三可軒))를 당호로 삼은 것으로부터 유래하는데, 둘째아들 박광석이 분가(1783)한 후 사랑채(1826)와 안채(1869)를 지었고, 박광석의 손자 박규현이 1874년에 연을 심어 가꾼 연못과 정자(하엽정)를 추가했으며, 파산서당 명칭은 삼가헌 뒷동산 지명과 연계된다. 셋째, 네모꼴 연못은 길이 21m, 너비 15m 규모로 연꽃을 심었는데, 못 가운데 원형 섬을 두어 조선시대의 보편적인 성리학적 세계관을 반영하고 있다. 파산서당에 부가된 정자(하엽정)의 명칭, 동쪽 방 이연헌(怡燕軒), 서쪽 방 몽양재(蒙養齋) 등은 군자적 삶의 염원, 그리고 자손들의 밝은 미래를 염원하는 뜻을 담았다. 넷째, 성리학적 규범(소나무, 연꽃, 대나무), 안빈낙도의 생활철학(버드나무), 은일사상과 태평성대의 염원(대나무), 그리고 구휼목적과 실용성(밤나무, 상수리나무, 가래나무, 옻나무 등)에 비중을 둔 식재수종의 반영을 추적할 수 있는데, 이는 서당이라고 하는 장소성과 상징성, 절제미학 등을 고려한 조경법이라 하겠다. 다섯째, 조영초기 식재수종은 회화나무와 연꽃을 제외하고 대부분 고사하여 다른 수종으로 대체되었는데, 서당 기능의 상실과 풍수적 가치(홍동백서 상징수종), 벽사기능(엄나무와 탱자나무), 심미성 및 실용적 가치(해당화, 매화, 배나무, 복숭아나무, 굴참나무), 가문의 번영과 변화지 않는 청백의 삶(자귀나무, 배롱나무, 주목), 심미관 등 후손들의 확장된 작정관을 보여주는 사례이다.

경주 구황동 원지(九黃洞 園池) 유적 창건 및 변화 시기의 조영과 성격 변화 (Changes in Construction and Characteristics during the Period of Foundation and Change of the Garden Pond Site in Guhwang-dong, Gyeongju)

  • 김형석
    • 헤리티지:역사와 과학
    • /
    • 제55권3호
    • /
    • pp.102-118
    • /
    • 2022
  • 신라왕경 경주는 신라 천년의 문화와 기술이 집약된 도시이다. 하지만 신라왕경의 조경 유적에 대해서는 동궁과 월지 외에는 관련 자료 부족 등의 이유로 연구가 미진하였다. 이에 본 연구에서는 동궁과 월지에 이어 그 전모가 발굴조사로 확인된 구황동 원지의 조영 특성과 성격에 대해 고찰하였다. 경주 구황동 원지는 발굴조사 후 지금까지 궁원지(宮園池)이냐 분황사의 사원지(寺院池)이냐를 두고 의견이 분분하다. 원지의 특징인 두 시기로 구분되는 유구의 양상으로 볼 때 1차시기인 6~7세기에는 용 신앙과 관련한 제의시설, 2차시기인 8~9세기에는 조경적 기능이 강화된 원지로 기능하였을 것으로 해석하였다. 또한, 문헌 기록에 나오는 청연궁(青淵宮)과 조추정(造秋亭)이 있던 자리일 가능성이 높다. 1차시기의 특징적인 시설로 'ㄹ'자형 수로가 확인되는데 수로의 폭과 깊이로 보아 단순 배수시설로 보기에는 부족하며, 용 제의와 관련하여 관념상 용이 들어오는 통로로 여겨진다. 나아가 의례와 관련한 유상곡수(流觴曲水) 시설일 가능성도 제기된다. 이러한 용 제의 관련 시설이 2차시기가 되면서 개편되는데 굴곡진 호안, 정원석, 누정 건물의 등장과 'ㄹ'자형 수로, 육각형 건물의 폐기 등과 관련하여 경관 기능 중심의 원지로 그 성격이 변화하였음을 알 수 있다. 성격과 관련하여서는 1차시기의 제의기능과 2차시기의 귀면와를 포함한 의장적 요소로 볼 때 왕실 관련 시설로 볼 수 있다. 원지 서편에 인접한 축대 상부가 삭평된 것으로 볼 때 주 건물지는 축대 상부에 있었을 가능성이 높다. 왕이 거처하는 이궁이 아닌 제의기능과 유휴기능을 가졌기 때문에 대규모 건물지는 없었을 것이다.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

Tl-201 심근관류 SPECT 검사에서 광대역 재구성(Wide Beam Reconstruction: WBR) 방법과 여과 후 역투영법에 따른 영상의 질 및 정량적 지표 값 비교 (The Comparison of Image Quality and Quantitative Indices by Wide Beam Reconstruction Method and Filtered Back Projection Method in Tl-201 Myocardial Perfusion SPECT)

  • 윤순상;남기표;심동오;김동석
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.122-127
    • /
    • 2010
  • 광대역 재구성 기법(Wide Beam Reconstruction : WBR)은 잡음을 감소시켜 신호 대 잡음 비를 증가시키고, 또 광속 확산 함수 효과(Beam spread function effect)를 저하시킴으로써 기존의 여과 후 역투영법(Filtered Back Projection : FBP)와 비교하였을 때 영상의 질은 동등하고 영상획득 시간을 줄일 수 있는 장점이 있다고 보고 있다. 본 연구는 UltraSPECT(Haifa,Israel)사 광대역 재구성 기법 인 Xpress3.$cardiac^{TM}$를 이용하여 기존의 FBP기법에 대한 WBR기법의 유용성을 알아보고자 한다. 1. Phantom 실험 : Anthropomorphic torso phantom을 사용하여 심근과 연부조직 그리고 폐 영역에$^{201}Tl$을 각각 74 kBq(2 ${\mu}Ci$)/cc, 11.1 kBq (0.3 ${\mu}Ci$)/cc, 2.59 kBq (0.07 ${\mu}Ci$)/cc의 비율로 투여하여 검사 시 실제 환자의 count와 유사하게 phantom을 제작하였다. 영상획득은 게이트법 적용 없이 Tl-201 심근관류 SPECT를 시행하였다. FBP로 재구성 한 영상은 투사영상 당 50초로 영상을 획득하였고, WBR으로 재구성 한 영상은 시간을 1/4로 단축하여 투사영상 당 13초로 영상을 획득하였다. 두 가지 기법으로 재구성한 영상을 Xeleris ver. 2.0551을 이용하여 반치폭(Full Width at Half Maximum : FWHM)과 평균 영상 대조도를 비교하였다. 2. 환자 정량분석 값 비교 : 2010년 1월 ~ 4월까지 본원에서 Tl-201 심근관류 SPECT 시행한30명의 환자를 대상으로 분석하였다. 먼저 아데노신 부하 후 stress 촬영 시 투사영상당 50초로 약 15분 동안 영상을 획득한 후 곧바로 투사영상당 13초로 약 4분 동안 영상을 다시 획득하였다. 또 rest 촬영시에도 동일하게 획득하였다. 투사영상 당 50초로 획득한 데이터는 FBP기법으로, 투사영상 당 13초로 획득한 데이터는 WBR기법으로 재구성하여 SSS, SDS, SRS, EDV, ESV, EF 값을 산출하여 비교 하였다. Phantom 실험 후 분해능 측정 결과, WBR기법으로 재구성한 경우 FBP기법에 비하여 FWHM은 29.46% 향상되었다(WBR data: 5.47 mm, FBP data: 7.07 mm). 또 평균 영상 대조도 증가하는 것으로 나타났다(WBR data: 0.90, FBP data: 0.56). 반면 환자 데이터를 분석한 결과, SSS, SDS, SRS, EDV, ESV, EF 등 정량분석 값들은 상호간에 유의한 차이를 보였다(p<0.01). 상관계수는 SSS, SDS, SRS에서 각각 0.18, 0.34, 0.08로 통계적으로 유의한 차이를 보였지만 EDV, ESV, EF에서는 각각 0.88, 0.89, 0.71로 좋은 상관관계를 보였다. Phantom 실험 결과 WBR기법은 FBP에 비해 분해능이 향상된 결과를 보였고, 평균 영상 대조도 역시 증가하는 것으로 나타났다. 환자 데이터를 분석하였을 때, WBR기법과 FBP기법 간의 정량분석 값들은 유의한 차이를 보였고, 상관계수 또한 SSS, SRS, SDS에서 유의한 차이가 보였으나, EDV, ESV, EF값에서는 높은 상관관계를 나타났다. 본 연구를 통하여 phantom 실험에서는 영상 획득 시간의 단축 및 영상의 질 향상을 확인할 수 있었다. 단, 환자 데이터에 대한 정량분석에서는 기존의 FBP기법에 비하여 많은 차이가 있어 임상에 적용 시 이에 대한 고려 및 추가적인 연구가 필요할 것이라고 사료된다.

  • PDF

익산 금마 황각동 유상곡수 유적 일대의 현황과 장소성에 대한 일고찰 (A Review of Current Status and Placeness on the Yusang-Goksu Ruins in Hwanggak-dong, Geumma, Iksan)

  • 노재현;한민순;서윤미;박율진
    • 한국전통조경학회지
    • /
    • 제40권3호
    • /
    • pp.20-35
    • /
    • 2022
  • 본 연구는 문헌연구와 옛지도 및 항공사진의 분석, 현장 관찰과 드론 사진 촬영과 고저측량 그리고 주민인터뷰를 통해 익산시 금마면 신용리 황각동에 소재한 '유상곡수(流觴曲水)' 암각서 유적의 입지성과 장소성을 추적하여 이곳에서의 유상곡수 수계(修禊) 등의 향유 가능성을 타진함으로써, 이곳의 장소성을 분명히 함으로써 국내 유상곡수로 정원 유적의 조명과 보존을 목적으로 시도되었다. 본 연구의 결론은 다음과 같다. 유상곡수 유적이 존재하는 황각동 일대는 여러 문헌에서 익산에서 가장 아름다운 가경(佳景)으로 손꼽혀왔다. 황각동의 유래는 의정부(議政府)의 별칭과 밀접하게 관련된 것으로 판단된다. 즉 좌찬성(左贊成)을 역임한 양곡(陽谷) 소세양(蘇世讓)과의 관련성에 주목하였는데 특히 그의 태생지와 인접하고 있을 뿐 아니라 별서인 태허정(太虛亭), 은거당인 퇴휴당(退休堂)과 묘소 그리고 사후 배향 서원 등이 인근에 다수 분포한 점을 그 근거로 제시하였다. 밭일 후 바위에 호미를 걸어 놓는 넓은 바위인 하서대(荷鋤臺)는 중국과 한국의 한시의 용례로 볼 때 한가로운 전원생활과 유유자적하게 살아가는 소박하고 은자적인 삶을 표현한 것으로 보인다. 본 유적의 핵심이 되는 '유상곡수' 바위글씨가 있는 수석바위 상부의 암혈(巖穴)은 수계를 지원하기 위한 차일공(遮日孔)으로 파악되며 인근의 일간정과 모정은 유상곡수를 지원하기 위한 공간 기능을 수행했을 것으로 보인다. 등잔바위 전면에 새겨진 '황각동(黃閣洞)'바위글씨는 황각동천(黃閣洞天)에 이르는 관문으로, 향촌에 존재하는 이상세계를 관념화한 표식으로 파악하였다. 본 연구를 통해서 '황각동'과 '하서대' 바위글씨는 대한제국 광무(光武) 5년인 1901년 3월 29일에 익산군수 오횡묵과 지인인 김인길(金寅吉)이 새긴 것으로 확인되었다. 또한 이봉구의 「황각동운(黃閣洞韻)」과 양곡의 후손인 소진덕의 「황각동시회(黃閣洞詩會)」란 시제로 볼 때 황각동에서 곡수연과 관련되었을 것으로 추정되는 시사 모임이 최소한 일제강점기 초기까지도 행해졌음을 유추할 수 있다. 한편 현재 곡수로의 최대폭은 11.3m, 횡단구배는 15.04%로 계상되었으며 곡수로로 추정되는 수로 구간의 연장거리는 약 27.6m, 종단구배는 3.51%로 측정되었으나 현재 양안이 석축으로 처리된 점을 감안한다면 곡수로의 폭원과 연장거리는 훨씬 길었을 것으로 추정된다. 황각동 유상곡수 유적과 관련된 봄(삼월삼짇날) 모춘(暮春) 이용, 음주와 시 짓기, 시제 「황각동시회」, 유상곡수 바위글씨 그리고 인근 유상정으로 추정되는 일간정이라는 정자의 존재 등으로 볼 때 최소한 조선 말기까지 유상곡수연이 펼쳐진 공간이었음이 확인된다. 아쉽게도 '유상곡수'바위글씨에 대한 암각 주체와 조선 말기 이전의 향유자 등에 대해서는 자료 부족으로 확인하지 못함은 연구 한계로 남는다. 이는 향후 이에 대한 꾸준한 자료 발굴 노력을 통해 구명해야 할 부분이다.

박쥐 맨아래구역 띠뇌실막세포의 Glial Fibrillary Acidic Protein에 대한 면역조직화학 및 면역세포화학적 연구 (Immunohistochemical and Immunocytochemical Study about the Glial Fibrillary Acidic Protein in the Tanycytes of the Area Postrema of Bat)

  • 양영철;조병필;강호석
    • Applied Microscopy
    • /
    • 제30권4호
    • /
    • pp.377-387
    • /
    • 2000
  • 뇌실을 감싸는 뇌실막층은 대부분이 일반적인 뇌실막 세포로 이루어졌으나, 이들 세포 사이에 간혹 띠뇌실막 세포(tanycyte)가 분포하고 있다. 띠뇌실막세포는 일반적인 뇌실막세포와는 달리 뇌의 실질로 뻗은 매우 긴 기저돌기를 갖고 있다. 특히 제3뇌실의 뇌실막층에서 주로 연구된 띠뇌실막세포는 뇌실과 뇌실질의 혈관 혹은 신경세포와의 사이에 물질교환을 담당하는 것으로 추측되고 있으며, 띠뇌실막세포는 일반적인 뇌실막세포와는 달리 glial fibrillary acidic protein(GFAP)항체에 대해 양성반응을 보이는 것으로 알려져 있다. 본 연구는 면역조직화학 및 면역금표지법을 이용하여 박쥐 맨아래구역을 감싸는 뇌실막층에서 GFAP 항체에 대해 양성반응을 보이는 세포의 분포여부 및 이의 미세 구조를 확인하고자 시행하여 다음과 같은 결론을 얻었다. 세로 절단한 절편을 대상으로 GFAP 항체를 이용하여 면역염색한 후 광학현미경으로 확인한 결과 맨아래구역을 감싸는 뇌실막층에 GFAP 양성반응을 보이는 세포가 관찰되었으며, 특히 맨아래구역의 목부분에서 양성반응 세포가 많이 모여 있었다. GFAP양성반응을 보이는 세포들은 매우 긴 기저돌기를 갖고 있었으며, 기저돌기에서도 매우 강한 GFAP 양성반응을 보였다. 세포체에서는 주변부에서 양성반응을 보였다. 전자현미경하에서 맨아래구역 띠뇌실막세포는 주로 ependymal tanycytes였으며, 자유면에 소수의 미세융모 및 세포질돌기가 관찰되었으나, 섬모는 관찰되지 않았다. 기저부에 특징적으로 긴 기저돌기를 갖고 있었으며 이 돌기에는 중간세사 및 세로로 길게 달리는 사립체가 발달되어 있었고, 세포체와 돌기에 지방방울이 산재되어 있었다. 금입자를 표지한 GFAP항체를 사용하여 면역 염색한 후 전자현미경으로 관찰한 결과 세포체에서 핵을 둘러싸는 중간세사에서 금입자를 관찰할 수 있었으며, 나머지 핵을 비롯한 다른 세포소기관이나 세포질에서는 관찰되지 많았다. 또한 기저돌기에서도 중간세사에서만 금입자를 관찰할 수 있었다. 이와 같은 본 실험의 결과는 박쥐 맨아래구역 뇌실막층에도 띠뇌실막세포가 존재하고 있으며, 이 세포의 발달된 긴 기저돌기는 띠뇌실막세포가 일반적인 뇌실막세포와는 다른 기능을 동면동물인 박쥐의 맨아래구역에서도 수행하고 있음을 암시하고 있으나 이를 확인하기 위해서 더욱 자세한 연구가 필요한 것으로 사료된다.

  • PDF

에티오피아 남부 켄티차 페그마타이트의 분화양상과 희유원소 광화작용 (Fractionation and Rare-Element Mineralization of Kenticha Pegmatite, Southern Ethiopia)

  • 김의준;김수영;문동혁;고상모
    • 자원환경지질
    • /
    • 제46권5호
    • /
    • pp.375-390
    • /
    • 2013
  • 켄티차(Kenticha) 희유원소(Ta-Li-Nb-Be) 광화대는 에티오피아 남부의 오피올라이트 습곡-쓰러스트 복합체내에 위치하고 있으며, 1980년대 에티오피아-구소련간 수행된 공동탐사 프로그램을 통해서 처음 발견되었다. 켄티차 희유원소 광화대는 남쪽에서 북쪽으로 덜미다마(Dermidama), 킬킬리(Kilkele), 슈니힐(Shuni Hill), 켄티차, 부포(Bupo) 페그마타이트를 포함한다. 켄티차 페그마타이트는 남북방향의 사문암과 활석-녹니석 편암층을 평행하게 관입하고 있으며, 대략 연장 2 km, 폭 400-700 m로 노출되어 있다. 켄티차 페그마타이트는 내부적으로 대상(zoning)을 이루고 있으며, 광물조합에 따라 하부 석영-백운모-조장석 화강암, 중부 백운모-석영-조장석-미사장석 페그마타이트, 상부 스포듀민-석영-조장석 페그마타이트로 세분된다. 주성분, 미량성분(Rb, Li, Nb, Ta, Ga), 원소비(K/Rb, Nb/Ta, Mg/Li, Al/Ga)는 페그마타이트의 분별작용과 고화작용이 하부에서 상부 페그마타이트로 진행되었음을 시사한다. 반면에 일반적인 페그마타이트 멜트의 분화양상과 달리 켄티차 페그마타이트의 Mg/Li 비는 상부 페그마타이트로 가면서 증가하는 양상을 보인다. 이러한 양상은 후기 마그마성 열수변질 또는 상부 초염기성암과의 반응 결과로 해석된다. 켄티차 페그마타이트의 희유원소 광화작용은 상부 페그마타이트에 집중되며, 최대 $Li_2O$ 3.0%, Rb 3,780 pm, Cs 111 ppm, Ta 1,320 ppm, and Nb 332 ppm을 함유하고 있다. 켄티차 페그마타이트에서 광석광물은 주로 탄탈라이트, 스포듀민, 레피돌라이트가 산출되며, 탄탈라이트는 거정의 석영-스포듀민과 상대적으로 세립의 당상 조장석과 함께 산출된다. 탄탈라이트는 $Mn^*$$Ta^*$ 값에 근거할 때 Mn-탄탈라이트로 분류된다. 거정질과 세립의 탄탈라이트는 조성($Mn^*$, $Ta^*$, Nb/Ta) 차이가 명확히 나타나며, 거정질 탄탈라이트는 세립의 탄탈라이트에 비해 Ta이 강하게 부화되며 Nb은 결핍되어 있다. 결론적으로 켄티차 페그마타이트에서 희유원소 광화작용은 마그마 멜트의 분별작용 최후기에 형성되었다.