• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2019

The study aimed to determine effects of light emitting diode (LED) and the ultraviolet radiation (UVA) light of plant factory on plant growth and ascorbic acid content of spinach (Spinacia oleracea cv. Shusiro). Plants were grown in a NFT (Nutrient Film Technique) system for 28 days after transplanting with fluorescent light (FL, control), LEDs and UVA (Blue+UVA (BUV), Red and Blue (R:B(2:1)) + UVA (RBUV), Red+UVA (RUV), White LED (W), Red and Blue (R:B(2:1)), Blue (B), Red (R)) under the same light intensity ($130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and photoperiod (16/8h = day/night). All the light sources containing the R (R, RB, RUV, and RBUV) showed leaf epinasty symptom at 21 days after transplanting (DAT). Under the RUV treatment, the lengths of leaf and leaf petiole were significantly reduced and the leaf width was increased, lowering the leaf shape index, compared to the R treatment. Under the BUV, however, the lengths of leaf and leaf petiole were increased significantly, and the leaf number was increased compared to B. Under the RBUV treatment, the leaf length was significantly shorter than other treatments, while no significant difference between the RBUV and RB for the fresh and dry weights and leaf area. Dry weights at 28 days after transplanting were significantly higher in the R, RUV and BUV treatments than those in the W and FL. The leaf area was significantly higher under the BUV treatment. The ascorbic acid content of the 28 day-old spinach under the B was significantly higher, followed by the BUV, and significantly lower in FL and R. All the integrated data suggest that the BUV light seems to be the most suitable for growth and quality of hydroponically grown spinach in a plant factory.

• Korean Journal of Environment and Ecology
• /
• v.33 no.3
• /
• pp.354-365
• /
• 2019

This study measured and analyzed the weather characteristics and the air-ion characteristics of walking space by land use type in Chungju, Chungcheongbuk Province during the heat wave. We used the land registration map to classify the type of land use in walking areas in the studied into the production and green area, the residential area, and the commercial area. We then selected 44 measurement points in about 4.1 km. They included 12 walking space points in the green area, 14 in the residential area, and 18 in the commercial area. Moreover, we calculated the ion index by analyzing the impact of weather factors such as temperature, relative humidity, solar radiation, and net radiation in the walking space on the anion generation and cation generation by land use type during the heat wave. Comparison of air ion characteristics in walking space by type of land use during the heat wave showed that the average cation generation was in the order of commercial area ($700.73cations/cm^3$) > residential area ($600.76cations/cm^3$) > green area ($589.73cations/cm^3$). The average anion generation was in the order of green area ($663.95anions/cm^3$) > residential area ($628.48anions/cm^3$) > commercial area ($527.48anions/cm^3$). The average ion index was in the order of green area (1.13) > residential area (1.04) > commercial area (0.75). This study checked the weather characteristics, cation generation, and anion generation in walking space according to the land use type during the heat wave and checked the difference of ion indexes in the walking space according to the land use type. However, there were limitations in the lack of accurate comparison according to the land use due to the moving measurement and the insufficient quantitative comparison according to the change of road width. Therefore, we recommend further studies that consider the road characteristics.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2019

This study examined the growth and fruiting characteristics and the acorns biomass allometric equation of Quercus acuta to provide reference data related to the growth and seed supply during the restoration of evergreen forest in the warm temperate zone in Wando Island, Korea. For the growth survey, we selected and cut three sample trees having a mean diameter at breast height (DBH) to investigate the growth analysis through a stem analysis. We then developed the allometric equation (Y=aX+b) of DBH and tree height growth characteristic (Y) according to the average tree age (X) of sampled trees and estimated the DBH and tree height according to the age of Quercus acuta. For the fruiting survey, we selected and cut three sample trees with full fruit in August when, they are at the early mature fruiting stage, for the analysis. To develop the acorns/tree biomass allometric equation of Quercus acuta, we selected and cut ten sample trees of evenly divided diameters. The acorns biomass allometric equation ($Y=aX^b$) was derived by analyzing the biomass (Y) and the growth characteristics (X), such as the DBH, tree height, crown width, and crown height. The allometric equations of average tree age according to DBH and tree height were Y=0506X-2.064 ($R^2=0.999$) and Y=0.321X+0689 ($R^2=0.992$), respectively. The developed allometric equations estimated that the DBH were 3.0cm, 8.1cm, 13.1cm and 18.2cm while the tree heights were 3.9m, 7.1m, 10.3m, and 13.5m when the tree ages were 10, 20, 30, and 40 years, respectively. The analysis results of fruiting characteristics showed that the length, the diameter, the number of fruits, and the number of acorns per fruiting branch had the statistically significant difference and tended to decrease from the upper part to the lower part of crown downward. The total number of acorns was 1,312 acorns/tree in the upper part, 115 acorns/tree in the middle part, and 5 acorns/tree in the lower part of the crown. The allometric equation for the amount of acorns with DBH as an independent variable was $Y=0.003X^{4.260}$ with the coefficient of determination at 0.896. Although the coefficient of determination of the allometric equation using only DBH as the independent variable was lower than that using DBH and tree height ($D^2H$), it would be more practical to consider only DBH as the independent variable because of measurement errors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.95-101
• /
• 2019

Purpose: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (${\mu}TBS$) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. Materials and methods: Four adhesive primers (Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer) and two resin cements (Panavia F2.0, G-CEM LinkAce) were tested. One hundred fifty Co-Cr beams were prepared from Co-Cr ingots via casting ($6mm\;ength{\times}1mm\;width{\times}1mm\;thick$). The metal beams were randomly divided into ten groups according to the adhesive primers and resin cements used; the no-primer groups served as the control (n = 15). After sandblasting with aluminum oxide ($125{\mu}m$ grain), the metal and resin cements were bonded together using a silicone mold. Prior to testing, all metal-resin beams were examined under stereomicroscope, and subjected to the ${\mu}TBS$ test. The mean value of each group was analyzed via one-way ANOVA with Tukey's test as post hoc (${\alpha}=.05$) using SPSS software. Results: The mean ${\mu}TBS$ of all groups was ranged from 20 to 28 MPa. There is no statistically significant difference between groups (P > .05). Mixed failure, which is the combination of adhesive and cohesive failures, is the most prevalent failure mode in both the Panavia F2.0 and G-Cem LinkAce groups. Conclusion: The ${\mu}TBS$ of all tested groups are relatively high; however, the primers used in this study result in no favorable effect in the ${\mu}TBS$ of Panavia F2.0 and G-Cem LinkAce resin cement to Co-Cr alloy.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.85-93
• /
• 2021

In hydroponic cultivation, in order to investigate the change of lettuce growth and physiologically active substances through CO2 tablet treatment in nutrient solution, we used a solid carbonated tablets commercially available in the Netherlands. The experiment consisted of 0.5-fold, 1-fold, and 2-fold treatment groups with no treatment as a control. As a result, the atmospheric CO2 concentration in the chamber after CO2 tablet treatment showed the highest value at 472.2 µL·L-1 in the 2-fold treatment zone immediately after treatment, and the pH in the nutrient solution decreased the most to pH 6.03 in the 2-fold treatment zone. After that, over time, the CO2 concentration and pH recovered to the level before treatment. Leaf width and leaf area of lettuce showed the highest values of 17.1cm and 1067.14 ㎠ when treated 2-fold with CO2 tablet, while fresh weight and dry weight of the above-ground part were highest at 63.87 g and 3.08 g in 0.5-fold treatment. The root length of lettuce was the longest (28.4 cm) in the control, but there was no significant difference in the fresh weight and the dry weight among the treatments. Apparently, it was observed that the root length of the lettuce was shortened by CO2 tablet treatment and a lot of side roots occurred. In addition, there was a growth disorder in which the roots turned black, but it was found that there was no negative effect on the growth of the above-ground part. As a result of analyzing the bioactive compounds of lettuce by CO2 tablet treatment, chlorogenic acid and quercetin were detected. As a result of quantitative analysis, chlorogenic acid increased by 249% compared to the control in 1-fold treatment, but quercetin decreased by 37%. As a result of comparing the DPPH radical scavenging ability showing antioxidant activity, the control and 0.5-fold treatment showed significantly higher values than the 1-fold and 2-fold treatments. This suggests that carbonated water treatment is effective in increasing the growth and bioactive compounds of hydroponic lettuce.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.15-33
• /
• 2021

In this study, the possibility of discriminating Fire blight (FB) infection tested using the hyperspectral imagery. The reflectance of healthy and infected leaves and branches was acquired with 5 nm of full width at high maximum (FWHM) and then it was standardized to 10 nm, 25 nm, 50 nm, and 80 nm of FWHM. The standardized samples were divided into training and test sets at ratios of 7:3, 5:5 and 3:7 to find the optimal bands of FWHM by the decision tree analysis. Classification accuracy was evaluated using overall accuracy (OA) and kappa coefficient (KC). The hyperspectral reflectance of infected leaves and branches was significantly lower than those of healthy green, red-edge (RE) and near infrared (NIR) regions. The bands selected for the first node were generally 750 and 800 nm; these were used to identify the infection of leaves and branches, respectively. The accuracy of the classifier was higher in the 7:3 ratio. Four bands with 50 nm of FWHM (450, 650, 750, and 950 nm) might be reasonable because the difference in the recalculated accuracy between 8 bands with 10 nm of FWHM (440, 580, 640, 660, 680, 710, 730, and 740 nm) and 4 bands was only 1.8% for OA and 4.1% for KC, respectively. Finally, adding two bands (550 nm and 800 nm with 25 nm of FWHM) in four bands with 50 nm of FWHM have been proposed to improve the usability of multispectral image sensors with performing various roles in agriculture as well as detecting FB with other combinations of spectral bands.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.306-315
• /
• 2021

This study analyzed the effects of light-shielding curtains and halogens on spectrum when acquiring hyperspectral images in a greenhouse. The image data of tarp (1.4*1.4 m, 12%) with 30 degrees of angles was achieved three times with four conditions depending on 14 heights using the automatic image acquisition system installed in the greenhouse at the department of Southern Area of National Institute of Crop Science. When the image was acquired without both a light-shielding curtain and halogen lamp, there was a difference in spectral tendencies between direct light and shadow parts on the base of 550 nm. The average coefficient of variation (CV) for direct light and shadow parts was 1.8% and 4.2%, respective. The average CV value was increased to 12.5% regardless of shadows. When the image was acquired only used a halogen lamp, the average CV of the direct light and shadow parts were 2 .6% and 10.6%, and the width of change on the spectrum was increased because the amount of halogen light was changed depending on the height. In the case of shading curtains only used, the average CV was 1.6%, and the distinction between direct light and shadows disappeared. When the image was acquired using a shading curtain and halogen lamp, the average CV was increased to 10.2% because the amount of halogen light differed depending on the height. When the average CV depending on the height was calculated using halogen and light-shielding curtains, it was 1.4% at 0.1m and 1.9% at 0.2 m, 2 .6% at 0.3m, and 3.3% at 0.4m of height, respectively. When hyperspectral imagery is acquired, it is necessary to use a shading curtain to minimize the effect of shadows. Moreover, in case of supplementary lighting by using a halogen lamp, it is judged to be effective when the size of the object is less than 0.2 m and the distance between the object and the housing is kept constant.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.335-341
• /
• 2022

The purpose of this study was to investigate the radiation protection effect of blueberries. The experimental animals used in this study were 8-week-old 21 SD male rats weighed 280-300 g. The animals were set to a normal group (A), a 5 Gy control group (B), and a 5 Gy experimental group (C) of seven rats each, and (50 mg/kg/day) of physiological saline solution of blueberries were orally administered twice a day with an oral dose of (200 mg/kg/day) for seven days and 5 Gy of radiation was irradiated in the case of groups B and C. As a result, it was identified that there was significance in white blood cells in this study (p<0.000). There was no significant difference in red blood cells or platelets. When examined in detail, among white blood cells (WBC), neutrocytes were found to be significantly different among the three groups: normal, control, and experimental groups (p<0.004). Lymphocytes were also found to be statistically significantly different among the three groups (p<0.000). Monocytes were not found to be statistically significantly different (p<0.483). When red blood cells (RBC) were examined, hemoglobin (HGB) was not found to be statistically significant different among the three groups (p<0.291). Hematocrit (HCT) was not found to be statistically significantly different among the three groups, either (p<0.564). Mean corpuscular volume (MCV) was found to be statistically significantly different among the three groups (p<0.001). Mean corpuscular hemoglobin (MCH) was also found to be statistically significantly among the three groups (p<0.028). Mean corpuscular hemoglobin concentration (MCHC) was found to be statistically significantly different among the three groups(p<0.020). Red blood cell distribution width (RDW) was not found to be statistically significantly different among the three groups (p<0.09). When platelets (PLT) were examined in detail, mean platelet volume (MpV) was found to be statistically significantly different among the three groups (MpV) (p<0.04). In conclusion, based on this study, blueberries are considered to have radiation protection effects.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.272-279
• /
• 2021

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng µL^-1] and 88.4 [ng µL^-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng µL^-1] and 74.8 [ng µL^-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.300-310
• /
• 2022

The objective of this experiment was to investigate the effect of drip irrigation volume on tomatoes (Solanum lycopersicum L.) grown in a greenhouse using perlite medium. Plants were treated by three different irrigation treatment I₀, I₂₅, and I₅₀ (where irrigation volume of I₂₅ and I₅₀ was 25% and 50% higher than I₀, having limited or no leaching). Growth characteristics of plants, yield and water use efficiency were measured. The result showed that plant height, leaf length and leaf width were lowest in the I₀ treated plants. However, these parameters were not statistically significant differences between the plants that were grown in the I₂₅ and I₅₀ treatment. Soluble solids content, acidity and dry matter of 111th, 132nd, and 143rd days harvested tomato were higher in the plants irrigated with lowest volume (I₀) than the higher volume (I₂₅ or I₅₀). In addition, water content was lower in the 111th and 132nd days of harvested tomatoes from the I₀ treatment. The number of big-size tomatoes (>180 g) was significantly higher in the I₂₅ irrigated plants. There was no significant difference in the total number of harvested fruits among the treatments. The average fruit weight and total yield of harvested tomatoes were lowest in the I₀ treated plants. The water consumption of tomato was not significantly different amongst the treatments but water use efficiency was lowest in the I₀ treatment. Principal component analysis revealed that total soluble solid and acidity of tomato showed a positive correlation between each other. These results suggest that I₂₅ was the optimum irrigation treatment for tomato based on its measured growth characteristics, yield and water use efficiency.