• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.255-261
• /
• 2020

This study was undertaken to evaluate the growth, body shape and carcass cutting yield traits of Duroc (D) and crossbred (Duroc×Pietrain×Pietrain; DPP) pigs. A total of 147 D and 101 DPP pigs were used for analyzing the growth trait, whereas 16 D and 16 DPP pigs were evaluated for carcass yields. Backfat thickness (BF) and average daily feed intake (ADFI) were significantly higher in D (14.07±0.24 mm, 2,101 g) than in DPP (12.69±3.25 mm, 1,909 g) (p <0.001). Moreover, D exhibited significantly higher body shape traits including body height (BH), chest depth (CD) and chest width (CW), as compared to DPP pigs (p <0.001). No differences were observed for body length (BL) between the two strains. Analysis of the carcass cutting yield traits determined for D and DPP were in the order: ham (HM; 31.17% and 33.43%), belly (BY; 23.40% and 19.55%), and picnic shoulder (PS; 16.54% and 16.87%), respectively. Then, HM showed a difference of 2.26% P with D(31.17%) and DPP(33.43%), while BY showed a difference of 3.85% P with D(23.40%) and DPP(19.55%). Taken together, our results indicate that DPP has a better feed efficiency than D, and therefore has the potential to increase the production of low-fat pork, targeting consumers having a high preference who have opted for a healthy lifestyle. These results can be used as basic data for developing an ideal pig breed.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.113-117
• /
• 2006

Purpose: Post-mastectomy radiotherapy (PMR) is known to decrease loco-regional recurrence. Adequate skin and dermal dose are achieved by adding bolus. The more difficult clinical issue is determining the necessary number of bolus treatment, given the limits of normal skin tolerance. The aim of this study is to evaluate the necessary number of bolus treatment after PMR in patients with breast cancer. Materials and Methods: Four female breast cancer patients were included in the study. The median age was 53 years(range, $38{\sim}74$), tumor were left sided in 2 patients and right sided in 2patients. All patients were treated with postoperative radiotherapy after MRM. Radiotherapy was delivered to the chest wall (C.W) and supraclavicular lymph nodes (SCL) using 4 MV X-ray. The total dose was 50 Gy, in 2 Gy fractions (with 5 times a week). CT was peformed for treatment planning, treatment planning was peformed using $ADAC-Pinnacles^3$ (Phillips, USA) for all patients without and with bolus. Bolus treatment plans were generated using image tool (0.5 cm of thickness and 6 cm of width). Dose distribution was analyzed and the increased skin dose rate in the build-up region was computed and the skin dose using TLD-100 chips (Harshaw, USA) was measured. Results: No significant difference was found in dose distribution without and with bolus; C.W coverage was $95{\sim}100%$ of the prescribed dose in both. But, there was remarkable difference in the skin dose to the scar. The skin dose to the scar without and with bolus were $100{\sim}105%\;and\;50{\sim}75%$. The increased skin dose rates in the build-up region for Pt. 1, Pt. 2. Pt. 3 and Pt. 4 were 23.3%, 35.6%, 34.9%, and 41.7%. The results of measured skin dose using TLD-100 chips in the cases without and with bolus were 209.3 cGy and 161.1 cGy, 200 cGy and 150.2 cGy, 211.4 cGy and 160.5 cGy, 198.6 cGy and 155.5 cGy for Pt. 1, Pt. 2, Pt. 3, and Pt. 4. Conclusion: It was concludes through this analysis that the adequate number of bolus treatments is 50-60% of the treatment program. Further, clinical trial is needed to evaluate the benefit and toxicity associated with the use of bolus in PMR.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.37-46
• /
• 1994

The purpose of this study was to evaluate the effect of various cements on the retention of casting crown and the cement film thickness. To evaluate the retention of crown, thirty maxillary premolars were used and prepared to largely same dimension. According to the routine method, Non-precious metal crowns were made. The teeth and the metal crowns were divided into three groups and cemented under 5kg static pressure. Group I was composed of 10 teeth and 10 metal crowns and was cemented with zinc phohsphste cement. Group II was composed of 10 teeth and 10 metal crowns and was cemented with Panavia-EX cement. Group III was composed of 10 teeth and 10 metal crowns and was cemented with All-Bond & composite resin cement. After 5 days, the cemented specimens were mounted and the failure loads were measured by an Instron Universal Testing Machine. To evaluate the cement film thickness. 5 metal teeth and 5metal crowns from a prepared maxillary premolar were made. Two marks were flawed on the margin part of each surface at 4-surfaces of each specimen(one mark : crown, the other : metal tooth) and were measured the width with SEM photograph(80 sheets) before and after cementation(Panavia-EX, All-Bond cement, & ZPC) was made. Differences of the widths of marks between before and after were measured, and differences from 4-surfaces of a specimen cemented with a cement were measured and calculated. The results were as follows ; 1. There was a statistically significant difference between the failure loads of group III and the others(p<0.05). 2. There was a statistically significant difference between the cement film thickness of group III and the others(p<0.05).

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.386-392
• /
• 2017

This study was conducted to examine the growth and phytochemical contents of spinach (Spinacia Oleracea L. 'Sushiro') as affected by different fluorescent lamps in a closed-type plant production system. Seeds were sown in a 128-cell plug tray filled in rockwool. The seedlings were transplanted into a DFT (deep floating technique) system with recycling nutrient solution (EC $1.5dS{\cdot}m^{-1}$ and pH 6.5) in a closed-type plant production system. The seedlings were grown under 3 types of fluorescent lamp, #S (NBFHF 32S8EX-D, CH LIGHTING Co. Ltd., China), #O (FHF32SSEX-D, Osram Co. Ltd., Germany), and #P (FLR32SS EX-D, Philips Co. Ltd., The Netherlands) at $150{\mu}mol{\cdot}m-2{\cdot}s^{-1}\;PPFD$ with a photoperiod of 14/10 (light/dark) hours. Plants were cultured under condition of $25{\pm}1^{\circ}C$ temperature and $60{\pm}10%$ relative humidity after transplanting. Thirty plants per each treatment were cultivated for $6^{th}$ week after transplanting. And growth and phytochemical contents were measured at $3^{rd}$ and $6^{th}$ week. At the $3^{rd}$ week after transplanting, the parameter values of plant height and leaf width were higher in the #O than the others. However, fresh and dry weights of root were the greatest in the #P. In addition, total phenolic concentration was the greatest in the #P. At $6^{th}$ week after transplanting, the #O had the greatest growth of spinach in the plant height and fresh and dry weights of shoot. The total phenolic contents significantly increased in the #O and showed significantly difference. However, there was no significant difference all treatments in antioxidant activity. Therefore, these results suggest that the #O was suitable for the growth and phytochemical accumulation of spinach in a closed-type plant production system.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.304-313
• /
• 2010

Out of the tenth graders of K girl's high school in J city, 24 students whose %fat was over 30% were divided into 3 groups through Purposing Sampling. Groups A and B were exercise groups and C was the control group. Using Borg's RPE (rating of perceived exertion), RPE 15-17 (hard-very hard) $\times$ 3 sets were set up for group A, RPE 11-13 (fairly light-somewhat hard) $\times$ 3 sets were set up for group B, and both groups performed step aerobics (step box: 68cm in length, 28cm in width, 15cm in hight, 450g in weight) for 50-60 minutes a day, 3 days a week for 8 weeks in total. This research was conducted to find out the effects of various RPE in step aerobics on the immunologic function (neutrophil, lymphocyte, monocyte, eosinophil, basophil, IgG, IgA, and IgM levels) of overweight female high school students. By using SPSS Ver. 14.0, a repeated two-way ANOVA was conducted to find out the effects of interaction between the groups and time period, paired t-test to evaluate data within each group, and pre- and post experiment difference rates (%diff) to perform one-way ANOVA for group comparisons. The following results were found. As for WBC, within group A, neutrophil, monocyte, basophil, and eosinophil levels increased, while lymphocyte levels remained the same. Within group B, eosinophil levels decreased while neutrophil, lymphocyte, monocyte, and basophil levels showed no differences. Within the control group, neutrophil, basophil, and eosinophil levels decreased while lymphocyte and monocyte levels showed no differences. As for the group comparisons, neutrophil levels increased more in group A than group B and the control group. There were no differences in lymphocyte levels among the three groups. Monocyte levels increased more in group A and B than the control group. Basophil and Eosinophil increased more in group A than group B and the control group. As for immunoglobin, within group A, the IgG level increased but the levels of IgA and IgM did not change. Within group B, the IgA level increased but the level of IgG decreased, and the level of IgM did not change. Within the control group, the IgG level decreased but the levels of IgA and IgM did not change. As for the group comparisons, the level of IgA increased more in group A than the control group, and the level of IgG increased more in group A than group B and the control group, but levels of IgM among the three groups did not show any difference. In summary, WBC and Ig levels showed that the three groups remained at the reference interval even after the exercise program. However, group A, which performed RPE 15-17 in step aerobics, showed increase in more measured items than the other groups, and this implies that the immunologic function has improved in the range of the reference intervals. Therefore, it will be effective to conduct step aerobics with the RPE 15-17 (hard-very hard) in order to increase the immunologic function.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.11-15
• /
• 2005

Fruit characteristics, saccharinity, and antioxidative activity of selected clones of Rubus coreanus, grown in Korea, well-known as edible and medical resources, frequently used and which has an excellent pharmacological activity are examined and analyzed. The results obtained from this study can be summarized as follows; Result of surveying characteristics for the fruit and saccharinity variation by collection time, there are some meaningful differences between examined clones and the collection time, exception of the fruit width. From the clones, SG 3 is the biggest in size, the highest in the saccharinity out of five clones, on the other hand, CJ 18 and SH 3 are the opposite. Meanwhile, comparing examined saccharinity factor with maximum temperature and precipitation out of daily climates at Suwon Meteorological Observatory at the same period, on the day the highest temperature is $29.5^{\circ}C$, saccharinity distinctively ascends, but on the day the precipitation is recorded 121.5 mm and next day, the saccharinity descends. Also, five-day saccharinity until the precipitation lower than 0.1 mm per day shows from 10.4 to 11.5 Brix higher than the average saccharinity of 9.7 Brix. Fifteen clones including CA 6 about fruit characteristics in terms of collection layer and saccharinity variation were examined, there is significantly difference among examined clones, but about the collection layer, only saccharinity factor has meaningful significance. For clones, MJ 11 is the biggest and excellent character of 15 clones but the saccharinity, 10.3 Brix lows a bit, MC 9 and HAE 5 are the worst fruit in character but saccharinity is 13.4 Brix and 10.6 Brix which is higher than the average saccharinity of 9.8 Brix. About saccharinity for the collection layer, the fruit average saccharinity, collected from the upper layer which is good at lightness and temperature condition, is 10.2 Brix which shows higher than the one of the fruit, 9.7 Bix and 9.5 Brix collected from the middle or the lower layer. The saccharinity of fruit collected from the middle or the lower layer is lower than the average saccharinity of 9.8 Brix out of 15 surveyed clones. Surveying antioxidative activity resulted from free radical scavenging activity about 30 clones of fruit in total, there is difference between surveyed clones. Especially, Immatured fruit extracts exhibited higher free radical scavenging activity of 94.5 to 97.5% which indicates the similarity to Ascorbic acid, unlike other clones, on the concentration of 250 to 1,000 ppm.

• Journal of Korean Society of Forest Science
• /
• v.55 no.1
• /
• pp.37-46
• /
• 1982

These studies were carried out to know the measure of damage having an effect on the ornamental trees owing to sulfurous acid gas($So_2$) which injures much forest trees among air pollutions in south area of Korean and to know the difference of smoke resistance on the five representative species among them and therefore to establish the preventive measure of air pollutions in industrial complex of south area of Korea by the ornamental trees. The reaction formula utilized was $Na_2So_2+H_2So_4$ $Na_2So_4+H_O+So_4$. The results obtained were as follows. 1) The ornamental trees surveyed in the industrial complexes of Ul-San, Chang-Won and Po-hang belonged to 51 species, 161,699 trees in all. The most five species among 51 sorts of woody plants were Populus tomentiglandulosa, Buxus microphylla, Forsythia korenan, Juniperus chinensis and Pinus densiflora. 2) The relation between the concentration of sulfurous acid gas($So_2$) and the damage rate upon investigation in each species: In case of low concentration the destructive quantities of cells of woody plants, and the more increased the concentrations, the more increased the amount of damage. 3) The difference of smoke resistance among five species showed to be the strongest in Buxus micorphylla, the second rand Pupulus tomentiglandulosa, the third rand Forsythia koreana, the fourth rank Juniperus chinensis and the weakest in Pinus densiflora. 4) The ornamental trees of industrial complex expecially in south area of Korea in future should be planted gradually broad-leaved trees which have strong sprout, smoke resistance and thick leaved rather than comifers. 5) I think that the area of city forest in industrial complex requires about $50m^2$ per head of population and about 100m width of green belt between industrial area and residential district.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.290-296
• /
• 2015

This study was conducted to investigate the influence of the mixed application of chemical fertilizer (CF) with liquid swine manure (LSM) on the agronomic characteristics, dry matter yield, minerals, and free sugar in cultivating Sorghum ${\times}$ Sorghum Hybrid (SSH) on paddy soil. The field experiment was designed in a randomized block design with three replications and consisted of CF 100% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and LSM 100% treatment (T4). The application of LSM was based only on the nitrogen (150 kg/ha). Plant length, leaf length, leaf width and stem diameter were significantly the lower in T4 (p<0.05). Stem hardness increased significantly (p<0.05) as the LSM application rate decreased. Fresh yield was the highest in T2, whereas the lowest in T3 (p<0.05). However, dry matter yields and TDN yield did not show significant difference among treatments. Crude protein was the highest in T1 (p<0.05). Crude fat content did not significant differences between the T1, T2, T3 and T4, but C showed a significantly different (p<0.05). NDF and crude fiber were the highest in T3 and C, respectively (p<0.05). However, ADF did not show significant difference among treatments. Total mineral contents were higher in the order of T1> T2> T4> T3> C (p<0.05). Free sugar contents were significantly higher at T1 and C as compared to other treatments. The analysis of all the above results suggests that the application of liquid swine manure is very effective, considering the yield performance and the content of mineral and free sugar. In addition, liquid swine manure may be possible to grow SSH without chemical fertilizer.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.812-818
• /
• 2014

Raising seedlings is important for fruit crops and is especially significant for strawberries as it accounts for 80% of their cultivation. However, there are few studies on raising seedlings of strawberries by hydroponics. Since strawberries show clear differences in growth characteristics based on cultivar, it is necessary to develop suitable fertilizer formula, concentration and pH for each cultivar, and also to examine the amount of nutrient feeding appropriate for each medium type. A key to raising seedlings of strawberries by hydroponics is the development of strategies to manage the concentration of nutrient solution. The mother plants of 'Daewang' strawberries were planted on hydroponics benches filled with cocopeat on March 28, 2012. Three nutrient solution treatments were employed during the term of raising seedlings: a type that supplied EC $0.6dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [0.6 (30) + 20]; a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [1.2 (30) + 20]; and a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 50 days [1.2 (50)]. The plants were then planted on hydroponics benches filled with cocopeat on September 20, and managed with EC $0.6-0.8dS{\cdot}m^{-1}$ strawberry nutrient solution developed by Yamazaki. After planting, shoot growth, flowering rate and fruit quality of the first cluster were investigated. The petiole length, leaf length, leaf width and crown diameter showed the highest grown in the [1.2 (50)] treatment, followed by [1.2 (30) + 20], and then [0.6 (30) + 20], indicating that the higher concentration of nutrient solution was preferable for raising seedlings. However, the growth differences among treatments gradually disappeared as growth continued, and the crown diameter especially grew to exhibit almost no difference at all among treatments. The point of flowering came first in [0.6 (30) + 20], followed by [1.2 (30) + 20] and then [1.2 (50)]. The [0.6 (30) + 20] treatment showed much earlier flowering than other treatments, which implies that low-concentration nutrient solution may be beneficial to the flowering of 'Daewang' strawberries while raising seedlings. There was no statistically significant difference among treatments in fruit length, fruit diameter and fruit firmness. Fruit weight in [1.2 (50)] treatment was significantly higher than other treatments. However, soluble solids of fruit was the lowest in [1.2 (50)] treatment. Together, the results of this experiment imply that it is better to supply EC $0.6dS{\cdot}m^{-1}$ solution for 30 days and then supply only water for 20 days to adequately manage concentration of nutrient solutions during the period of raising seedlings of strawberries by hydroponics.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).