• Title/Summary/Keyword: wideband signals

Search Result 209, Processing Time 0.023 seconds

The Effect of Radiated Electromagnetic Wave by Digital Modulation Signals on the Electronic Devices (디지털 변조 전자기파 방사에 의한 전자기기에 미치는 영향)

  • Cho, Won-Seo;Kwak, Phil-Keun;Park, Chang-Yeol;Yang, Jun-Kyu;Geum, Hong-Sik
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.22 no.2
    • /
    • pp.220-227
    • /
    • 2011
  • With the rapid development of mobile communication technology, the technologies based on the diverse digital modulation schemes have been used for the frequency range of over 800 MHz. The only radiation immunity has been tested using only AM signal based on IEC 61000-4-3 without any consideration of the influence of electromagnetic radiation in Korea. However, it has not been tested by wideband digital modulation signals such as cdmaone(IS-95), WCDMA and PM signal. The purpose of this study was to review the standards. In addition, the input signals were analyzed and tested considering the environments in Korea. The results showed that the devices were influenced by digital modulation signal or PM signal more than by AM signal.

Low-Sampling Rate UWB Channel Characterization and Synchronization

  • Maravic, Irena;Kusuma, Julius;Vetterli, Martin
    • Journal of Communications and Networks
    • /
    • v.5 no.4
    • /
    • pp.319-327
    • /
    • 2003
  • We consider the problem of low-sampling rate high-resolution channel estimation and timing for digital ultrawideband (UWB) receivers. We extend some of our recent results in sampling of certain classes of parametric non-bandlimited signals and develop a frequency domain method for channel estimation and synchronization in ultra-wideband systems, which uses sub-Nyquist uniform sampling and well-studied computational procedures. In particular, the proposed method can be used for identification of more realistic channel models, where different propagation paths undergo different frequency-selective fading. Moreover, we show that it is possible to obtain high-resolution estimates of all relevant channel parameters by sampling a received signal below the traditional Nyquist rate. Our approach leads to faster acquisition compared to current digital solutions, allows for slower A/D converters, and potentially reduces power consumption of digital UWB receivers significantly.

A Single Transistor-Level Direct-Conversion Mixer for Low-Voltage Low-Power Multi-band Radios

  • Choi, Byoung-Gun;Hyun, Seok-Bong;Tak, Geum-Young;Lee, Hee-Tae;Park, Seong-Su;Park, Chul-Soon
    • ETRI Journal
    • /
    • v.27 no.5
    • /
    • pp.579-584
    • /
    • 2005
  • A CMOS direct-conversion mixer with a single transistor-level topology is proposed in this paper. Since the single transistor-level topology needs smaller supply voltage than the conventional Gilbert-cell topology, the proposed mixer structure is suitable for a low power and highly integrated RF system-on-a-chip (SoC). The proposed direct-conversion mixer is designed for the multi-band ultra-wideband (UWB) system covering from 3 to 7 GHz. The conversion gain and input P1dB of the mixer are about 3 dB and -10 dBm, respectively, with multi-band RF signals. The mixer consumes 4.3 mA under a 1.8 V supply voltage.

  • PDF

Adaptive Interference Cancellation Using CMA-Correlation Normalized LMS for WCDMA System

  • Han, Yong-Sik;Yang, Woon-Geun
    • Journal of information and communication convergence engineering
    • /
    • v.8 no.2
    • /
    • pp.155-158
    • /
    • 2010
  • In this article, we proposed a new interference canceller using the adaptive algorithm. We designed constant modulus algorithm-correlation normailized least mean square (CMA-CNLMS) for wireless system. This structure is normalized LMS algorithm using correlation between the desired and input signal for cancelling the interference signals in the wideband code division multiple access (WCDMA) system. We showed that the proposed algorithm could improve the Mean Square Error (MSE) performance of LMS algorithm. MATLAB (Matrix Laboratory) is employed to analyze the proposed algorithm and to compare it with the experimental results. The MSE value of the LMS with mu=0.0001 was measured as - 12.5 dB, and that of the proposed algorithm was -19.5 dB which showed an improvement of 7dB.

TOA Estimation Technique for IR-UWB Based on Homogeneity Test

  • Djeddou, Mustapha;Zeher, Hichem;Nekachtali, Younes;Drouiche, Karim
    • ETRI Journal
    • /
    • v.35 no.5
    • /
    • pp.757-766
    • /
    • 2013
  • This paper deals with the estimation of the time of arrival (TOA) of ultra-wideband signals under IEEE 802.15.4a channel models. The proposed approach is based on a randomness test and consists of determining whether an autoregressive (AR) process modeling an energy frame is random or not by using a distance to measure the randomness. The proposed method uses a threshold that is derived analytically according to a preset false alarm probability. To highlight the effectiveness of the developed approach, simulation setups as well as real data experiments are conducted to assess the performance of the new TOA estimation algorithm. Thereby, the proposed method is compared with the cell averaging constant false alarm rate technique, the threshold comparison algorithm, and the technique based on maximum energy selection with search back. The obtained results are promising, considering both simulations and collected real-life data.

Modified Generic Mode Coding Scheme for Enhanced Sound Quality of G.718 SWB (G.718 초광대역 코덱의 음질 향상을 위한 개선된 Generic Mode Coding 방법)

  • Cho, Keun-Seok;Jeong, Sang-Bae
    • Phonetics and Speech Sciences
    • /
    • v.4 no.3
    • /
    • pp.119-125
    • /
    • 2012
  • This paper describes a new algorithm for encoding spectral shape and envelope in the generic mode of G.718 super-wide band (SWB). In the G.718 SWB coder, generic mode coding and sinusoidal enhancement are used for the quantization of modified discrete cosine transform (MDCT)-based parameters in the high frequency band. In the generic mode, the high frequency band is divided into sub-bands and for every sub-band the most similar match with the selected similarity criteria is searched from the coded and envelope normalized wideband content. In order to improve the quantization scheme in high frequency region of speech/audio signals, the modified generic mode by the improvement of the generic mode in G.718 SWB is proposed. In the proposed generic mode, perceptual vector quantization of spectral envelopes and the resolution increase for spectral copy are used. The performance of the proposed algorithm is evaluated in terms of objective quality. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

Application of SVD on Suppression of IEEE 802.11a Interference in TH-PAM UWB Systems

  • Xu, Shaoyi;Bai, Zhiquan;Yang, Qinghai;Kwak, Kyung-Sup
    • ETRI Journal
    • /
    • v.29 no.2
    • /
    • pp.237-239
    • /
    • 2007
  • Interference from IEEE 802.11a systems affects ultra-wideband (UWB) systems significantly. In this letter, we suggest a novel narrow-band interference (NBI) suppression technique based on the singular value decomposition (SVD) algorithm in time-hopping pulse amplitude modulation (TH-PAM) UWB systems. The SVD algorithm is used to approximate the interference which then is subtracted from the received signals. In contrast to the conventional notch filter and rake receiver, our method is more effective and the receiver complexity can be greatly reduced.

  • PDF

Robust range-only beacon mapping in multipath environments

  • Park, Byungjae;Lee, Sejin
    • ETRI Journal
    • /
    • v.42 no.1
    • /
    • pp.108-117
    • /
    • 2020
  • This study proposes a robust range-only beacon mapping method for registering the locations of range-only beacons automatically. The proposed method deals with the multipath propagation of signals from range-only beacons using the range-only measurement association (RoMA) and an unscented Kalman filter (UKF). The RoMA initially predicts the candidate positions of a range-only beacon. The location of the range-only beacon is then updated using the UKF. With the proposed method, the locations of range-only beacons are accurately estimated in a multipath environment. The proposed method also provides the location uncertainty of each range-only beacon. Simulation results using the model for multipath propagation and experimental results in a real indoor environment verify the performance of the proposed method.

Design of A Low-Voltage and High-Speed Pipelined A/D Converter Using Current-Mode Signals (저전압 고속 전류형 Pipelined A/D 변환기의 설계)

  • 박승균;이희덕;한철희
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.31A no.3
    • /
    • pp.18-27
    • /
    • 1994
  • An 8-bit 2-stage pipelined current mode A/D converter is designed with a new architecture, where the wideband track-and-hold amplifiers which have 2 integrators in parallel sample input signal twice per clock cycle. The conversion speed of the A-D converter is two times faster than that of conventional pipelined method. The converter is designed to be operated at the power supply voltage of 3.3V with the input dynamic range of 0-256$\mu$A. HSPICE simulation results show the performance of up to 55Msamples/s and power consumption of 150mW with the parameters of ISRC $1.5\mu$m BICMOS process. The chip area is 3${\times}4mm^{2}$.

  • PDF

Late Time and Wideband Electromagnetic Signal Extraction Using Gaussian Basis Function (가우시안 기저함수를 이용한 늦은 시간 및 광대역 전자기응답 추출)

  • Lee, Je-Hun;Ryu, Beong-Ju;Koh, Jinhwan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39A no.3
    • /
    • pp.140-148
    • /
    • 2014
  • In this paper, We proposed Gaussian function as a basis of hybrid method. Hybrid method is to extrapolate late time and high frequency data using early time and low frequency data. This method takes advantages of both MOT and MOM as well as having shorter running time and smaller error. For this method a better basis function is required. We compared the performance of the result with proposed function and conventional basis including Hermite and Laguerre polynomial.