• Horticultural Science & Technology
• /
• 제30권6호
• /
• pp.673-679
• /
• 2012

This study was conducted to examine the effect of artificial light source and photoperiod on the growth of leaf lettuce (Lactuca sativa L.) 'Seonhong Jeokchukmyeon' in a closed-type plant production system. Seedlings were grown under 3 light sources, fluorescent lamp (FL, Philips Co. Ltd., the Netherlands), WL #1 (Hepas Co. Ltd., Korea), and WL #2 (FC Poibe Co., Ltd., Korea), each with 3 photoperiods, 12/12, 18/6, and 24/0 (Light/Dark). An irradiance spectrum analysis showed that FL has various peaks in the 400-700 nm range, while WL #1 and WL #2 have only one monochromatic peak at 450 and 550 nm, respectively. The greatest plant height, fresh and dry weights were obtained in the 24/0 (Light/Dark) photoperiod. The 24/0 (Light/Dark) photoperiod treatment promoted vegetative growth of the leaf area. Length of the longest root, number of leaves, fresh weight, and total anthocyanin contents were greater in FL than in either WL #1 or #2. The greatest chlorophyll fluorescence (Fv/Fm) was found in the 12/12 (Light/Dark) photoperiod with FL treatment. The energy use efficiency of the LED increased by about 35-46% as compared to FL. Results suggest a possibility of LED being used as a substitute light source for fluorescent lamp for lettuce cultivation in a plant factory system.

• Korean Journal of Optics and Photonics
• /
• 제21권2호
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제26권1호
• /
• pp.80-82
• /
• 2013

White light emitting diode (LED) determined the most appropriate color temperature in reading lighting evaluated fatigue degree of eye according to color temperature. The eye fatigue degrees are determined by brightness and color temperature. Therefore, we measured the results of eyes test according to the change of color temperature and brightness. Experiments except for astigmatic corrected visual acuity of 0.8 more and age 20 to 25 years old, male and female college students was conducted in 100 patients. And constant illumination conditions, visual acuity was measured by varying the color temperature. The optometry at 10 minutes in the darkroom adapted eye. And then the temperature of $25{\pm}3$ degrees, the humidity was carried out at $50{\pm}5%$. As a result of typical color temperature of white light (5,600 K) has identification of the readability.

• Korean Journal of Optics and Photonics
• /
• 제25권2호
• /
• pp.102-107
• /
• 2014

In this paper the spectra of correlated color temperature (CCT) tunable white light-emitting diode (LED) luminaires, consisting of commercial red, green, blue, and amber LED chips, were optimized to increase color rendering index (CRI), and a special CRI of R9 for deep red color was obtained. To improve the design's accuracy, measured LED spectra were used instead of mathematically modeled ones. Real CCT tunable LED luminaires with CRIs of 87-90 and R9s of 34-93 were fabricated and demonstrated at CCTs of 3000-6000 K.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제25권6호
• /
• pp.18-27
• /
• 2011

LED lighting because of high efficiency, long life, friendly environment, as a general lighting of the next generation, has been substituted for incandescent bulb and fluorescent lamp. The proposed system for use of solar battery is the intelligent controller for LED street lights which is improved the method of battery charging and charging efficiency in winter to extend battery life cycle, controlled lighting current according to SoC and in steps. Also, it is implemented emotional lighting which is controlled with the surrounding environment, by using colorful sub LED to take up 10[%] of a source of total light, white LED. As a lab results, the proposed system was implemented functions to adapt to the environmental changes, and improved the charging efficiency and battery life cycle.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.145-148
• /
• 2008

In recent years, LED's have been adopted for and ever widening range of applications and numerous examples of the replacement of incandescent and fluorescent light sources due to the dramatic improvements in the efficiency of white LED's can be found. Automotive lighting devices, as with other lighting equipment, should exhibit low power consumption, long lifetime and provide new design opportunities. In this paper, an overview of trends of technology and standardization of LED headlamp were investigated and performed various experiments using LED headlamp.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제51권8호
• /
• pp.390-396
• /
• 2002

This paper Presents to choose number of RGB LED through optical special quality analysis of RGB LED samples and to produce ratio of RGB LED for a stable color variation and white light. Also, it is to design of a simple switching circuit using some resistances and switching transistors that is able to operate each 16 RGB LED stably, and switching control circuit base on a microcontroller that would be suitable for colors variation patterns control more than about 64 patterns and colors variation more than about 100,000 colors using ON/OFF and Duty control.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.67-68
• /
• 2007

The introduction of high brightness LEDs with white light and monochromatic colors have led to a movement towards specialty and general illumination applications. Because drive circuit of illumination LED has an effect on efficiency and life, research about the drive circuit following LED characteristic is needed. This paper proposed a implementation of the stand-alone LED lighting system using battery from photovoltaic power generation.

• Korean Journal of Materials Research
• /
• 제28권8호
• /
• pp.474-477
• /
• 2018

$Ca_3MgSi_2O_8:Eu^{2+}$(x = 0.003, 0.005, 0.007, 0.01, 0.03 mol) white phosphors for Light Emitting Diodes(LED) are synthesized with different concentrations of $Eu^{2+}$ ions using a solid state reaction method. The crystal structures, surface and optical properties of the phosphors are investigated using X-Ray Diffraction(XRD), Scanning Electron Microscope(SEM) and photoluminescence(PL). The X-Ray Diffraction results reveals that the crystal structure of the $Ca_3MgSi_2O_8:Eu^{2+}$ is a monoclinic system. The particle size of $Ca_3MgSi_2O_8:Eu^{2+}$ white phosphors is about $1{\sim}5{\mu}m$, as confirmed by SEM images. The maximum emission spectra of the phosphors are observed at 0.01 mol $Eu^{2+}$ concentration. The decrease in PL intensity in the $Ca_3MgSi_2O_8:Eu^{2+}$ white phosphors with $Eu^{2+}$ concentration is interpreted by concentration quenching. The International Commission on Illumination(CIE) coordinate of 0.01 mol Eu doped $Ca_3MgSi_2O_8$ is X = 0.2136, Y = 0.3771.