• 대한치과교정학회지
• /
• 제44권3호
• /
• pp.113-118
• /
• 2014

Objective: The purpose of this in vitro study was to examine the effects of fluoridated, casein phosphopeptide-amorphous calcium phosphate complex (CPP-ACP)-containing, and functionalized ${\beta}$-tricalcium phosphate (fTCP)-containing toothpastes on remineralization of white spot lesions (WSLs) by using Quantitative light-induced fluorescence (QLF-D) Biluminator$^{TM}$ 2. Methods: Forty-eight premolars, extracted for orthodontic reasons from 12 patients, with artificially induced WSLs were randomly and equally assigned to four treatment groups: fluoride (1,000 ppm), CPP-ACP, fTCP (with sodium fluoride), and control (deionized water) groups. Specimens were treated twice daily for 2 weeks and stored in saliva solution (1:1 mixture of artificial and human stimulated saliva) otherwise. QLF-D Biluminator$^{TM}$ 2 was used to measure changes in fluorescence, indicating alterations in the mineral contents of the WSLs, immediately before and after the 2 weeks of treatment. Results: Fluorescence greatly increased in the fTCP and CPP-ACP groups compared with the fluoride and control groups, which did not show significant differences. Conclusions: fTCP- and CPP-ACP-containing toothpastes seem to be more effective in reducing WSLs than 1,000-ppm fluoride-containing toothpastes.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.90-95
• /
• 2012

Objectives: The purpose of this study was to determine the effect of resin infiltration technique on color and surface hardness of white spot lesion (WSL) with various degrees of demineralization. Materials and Methods: Ten human upper premolars were cut and divided into quarters with a $3{\times}4mm$ window on the enamel surface. Each specimens were separated into four groups (n = 10) and immersed in demineralization solution to create WSL: control, no treatment (baseline); 12 h, 12 hr demineralization; 24 h, 24 hr demineralization; 48 h, 48 hr demineralization. Resin infiltration was performed to the specimens using Icon (DMG). $CIEL^*a^*b^*$ color parameters of the enamel-dentin complex were determined using a spectroradiometer at baseline, after caries formation and after resin infiltration. Surface hardness was measured by Vickers Micro Hardness Tester (Shimadzu, HMV-2). The differences in color and hardness among the groups were analyzed with ANOVA followed by Tukey test. Results: Resin infiltration induced color changes and increased the hardness of demineralized enamel. After resin infiltration, there was no difference in color change (${\Delta}E^*$) or microhardness among the groups (p < 0.05). Conclusion: There was no difference in the effect of resin infiltration on color and hardness among groups with different extents of demineralization.

• 대한치과교정학회지
• /
• 제53권6호
• /
• pp.374-392
• /
• 2023

Objective: Assess and evaluate the different indicators of oral health-related quality of life (OHRQoL) among patients treated with clear aligners (CAs) versus those treated with conventional fixed orthodontics (FAs). Methods: An electronic search was performed on the database is Web of Science, Scopus, and Embase databases. Randomized and non-randomized control trials, cross-sectional, prospective cohort and retrospective trials were included. Quality was assessed with risk of bias tool and risk of bias in non-randomised studies. Meta-analyses were performed with random effects models, estimating the standardized and non-standardized mean differences, odds ratio and risk ratio as the measure of effect. The effect on time was determined using a meta-regression model. Results: Thirty one articles were included in the qualitative synthesis and 17 in the meta-analysis. CAs had a significantly lower negative impact on QoL, with an "important" effect size, while the influence of time was not significant. Periodontal indicators plaque index (PI), gingival index (GI), probing depth (PD), and bleeding on probing show significantly better values in patients treated with CAs, with moderate to large effect sizes. PI and GI have a significant tendency to improve over time. In microbiological indicators, CAs present a lower biofilm mass without differences in the percentage of patients with high counts of Streptococcus mutans and Lactobacilli bacteria. The risk of white spot lesion onset is ten times lower in carriers of CAs. Conclusions: Patients wearing CAs show better periodontal indicators, less risk of white spot development, less biofilm mass and a better QoL than patients with FAs.

• 한국어병학회지
• /
• 제14권1호
• /
• pp.11-15
• /
• 2001

White Spot Baculovirus(WSBV) 미감염 새우 건강 종묘를 생산하기 위하여 난의 요오드 소독을 실시하였다. 유효 요오드농도 20,50,100,200 ppm에서 각 시험구의 대하(Penaeus chinensis) 수정난을 각각 30,60초 처리한 결과 각 농도의 30초 처리구에서는 50%이상의 상대부화율을 보였고, 60초 처리구에서는 20ppm 처리구에서만 약 50% 상대 부화율을 보인 반면 50 ppm이상에서는 부화율이 거의 없었다. 보리새우(Penaeus japoni cus)에서도 비슷한 결과를 보였다. 대하의 경우 세란만 실시한 대조구의 부화율은 33.3%이었지만, 보리새우는 55.2%로 상대적으로 높았다. 부화후 생존율을 보면 수정난의 소독으로 부화율은 낮아지지만 수정란 소독후 부화된 유생은 초기생육에는 문제점이 없었다. WSBV 미감염 건강종묘를 생산하기 위해서는 수정난을 세척하고 저농도의 요오드를 짧은 시간에 소독해야 한다.

• 미생물학회지
• /
• 제44권1호
• /
• pp.49-55
• /
• 2008

흰반점 바이러스(white spot syndrome virus, WSSV)는 양식산 새우에 감염하여 대량폐사를 일으키는 전염성이 매우 강한 병원성 바이러스이다. 본 연구에서는 강화도에 위치한 대하(Fenneropenaeus chinensis) 양식장의 양식수와 양식장으로 유입되는 해수에서 WSSV를 막여과법을 이용하여 농축하였으며, 새롭게 디자인한 primer와 Taqman probe를 사용하여 정량 실시간 PCR (quantitative real-time PCR, QRT-PCR)을 적용하여 WSSV를 정량하였다. 농도표준을 사용한 QRT-PCR 결과, 제작된 primer와 probe를 이용하여 WSSV가 정확하고 민감하게 검출됨을 확인하였다. 해수에 존재하는 WSSV와 물리화학적, 생물학적 환경요인간의 상관관계를 도출하기 위하여 양식수와 해수 유입수에서 대하 양식기간인 2007년 6월부터 9월까지 총 8회에 거쳐 다양한 환경요인을 분석하였다. 양식수 1L에 존재하는 WSSV의 양은 3,814-121,545 copy였으며, 이는 분원성 enterococci ($r^2=0.9$, p=0.02), 엽록소${\alpha}$ ($r^2=0.8$, p=0.03), 생화학적 산소요구량($r^2=0.8$, p=0.07)과 상관관계를 나타내었다. 결론적으로 본 연구에서 정립된 WSSV의 농축법 및 QRT-PCR 방법은 해수에 존재하는 WSSV를 정량하는데 효과적이었으며, 해수에 존재하는 WSSV의 양은 물리화학적 환경요인보다 생물학적 환경요인과 밀접한 관련을 보였다.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.149-158
• /
• 2014

The effects of spot cooling on growing ever-bearing strawberry in hydroponic cultivation during summer by spot cooling system was estimated in plastic greenhouse located in Pyeongchang. The temperature of cooling water was controlled by heat pump and maintained at the range of $15{\sim}20^{\circ}C$. Cooling pipes were installed in root zone and very close to crown. Spot cooling effect was estimated by applying system in three cases which were cooling root zone, crown plus root zone, and crown only. White low density polyethylene pipe in nominal diameter of 16 mm was installed on crown spot, and Stainless steel flexible pipe in nominal diameter of 15A was installed in root zone. Crown and root zone cooling water circulation was continuously performed at flowrates of 300 ~ 600 L/hr all day long. Strawberry yields by test beds were surveyed from Aug. 1 to Sep. 30. The accumulated yield growth rate compared with a control bed of crown cooling bed was 25 % and that of crown plus root zone cooling bed was 25 % and that of root zone cooling bed was 20 %. The temperatures of root spot in root zone cooling was maintained at $18{\sim}23.0^{\circ}C$ and that of crown spot in crown cooling was maintained at $19{\sim}24^{\circ}C$. Also, the temperatures of root spot in crown plus root zone cooling bed was maintained at $17.0{\sim}22.0^{\circ}C$ and that of crown spot was maintained at $19{\sim}25^{\circ}C$.

• 한국어병학회지
• /
• 제25권3호
• /
• pp.271-277
• /
• 2012

2012년 5월에서 11월 사이에 우리나라 넙치, 조피볼락, 무지개송어, 뱀장어, 흰다리새우, 전복 양식장에서 발생하는 폐사피해를 표본조사를 통해 모니터링하였다. 조사의 방식은 해당 양식장과 거래하고 있거나 관계를 맺고 있는 전국의 수산질병관리사 조사요원의 직접 현장 방문을 통한 면접과 표준 매뉴얼을 통한 진단을 통하여 실시하였다. 조사기간 중 넙치 양식장에서는 총 27.9%의 누적 피해율을 보여주었고, 이중 스쿠티카병, 연쇄구균병, VHS, 비감염성 원인에 의한 폐사, 비브리오병, 활주세균병의 순으로 폐사피해가 높은 것으로 나타났다. 조피볼락 양식장에서는 13.6%의 누적 피해율을 보여주었고, 아가미 흡충병, 연쇄구균병, 비브리오병, 활주세균병, 비감염성 원인에 의한 폐사 순의 폐사피해가 나타났다. 무지개송어의 경우 총 17.1%의 피해율을 기록하였고, 비감염성 원인에 의한 폐사와 백점병이 주된 폐사 원인으로 집계되었다. 뱀장어의 경우 비교적 낮은 0.6%의 피해율을 기록하였으며, 에드워드병, 백점병, 아가미흡충병이 주된 피해요인이었다. 흰다리새우는 71.2%의 피해율을 보였으며, 대부분 비감염성 원인에 의한 폐사으로 집계되었고, 바이러스성 흰반점병도 12.5%의 피해를 준 것으로 나타났다. 전복의 경우 10.7%의 피해율 모두가 비감염성 원인에 의한 폐사 피해인 것으로 조사되었다.

• 한국양식학회지
• /
• 제15권1호
• /
• pp.7-13
• /
• 2002

Since 1993, the White Spot Syndrome Virus (WSSV) disease occurred in China among cultured shrimps resulting in mass mortality. Epizootiological surveys undertaken during the outbreak period of 1993-1994 indicated that all stages of Penaeus chinensis, P. japonicus and P. monodon were infected. Consequent to the transport of contaminated shrimp seedlings and seawater, the disease spread all over the farms of China. The disease was more rapidly transmitted at temperatures above $25^{\circ}C$. Challenge experiments showed the causative agent was highly virulent. White spots appeared on the carapace of both span-taneous and experimentally infected shrimps. Moribund shrimps contained turbid hemolymph, hypertrophied Iymphoid organ and a necrotic mid-gut gland. Electron microscopy showed the presence of viral particles in the gills, stomach, lymphoid organ, and epidermal tissue of the infected shrimp. The visions were slightly ovoid with an envelope and averaged 350 $\times$ 150 nm; nucleocapsids measured 375 $\times$ 157 nm. With discontinuous sucrose gradient of 35, 50 and 60% (w/v), the virus was separated from hemolymph of the infected shrimp. The estimated molecular weight of genomic DNA was 237 Kb with EcoR I, 247 Kb with Hind III and 241kb with Pst I. A total of 9 hybridoma colones secreting monoclonal antibodies (MAbs) were produced from mouse myeloma and spleen cells immunized with WSSV. The immunofluorescence assay of gill tissue showed that the MAbs reacted with diseased but not with healthy shrimp. The MAbs belonged to IgGl, IgG2b subclass and IgM class, all with kappa light Immune-electron-microscopy with colloidal gold marker showed the presence of 5 MAbs epitopes on the envelope and one on the capsid of the virus. Baculoviral mid-gut gland necrosis showed the specificity of the MAbs produced. For diagnosis 5 different methods were selected. Using Kimura primers for PCR, or MAbs for immunoblot, ELISA or FAT method, in situ hybridization was carried out to show the gene. All these methods detected WSSV in the organ samples of the diseased shrimp but not in healthy one.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2004년도 수산관련학회 공동학술대회 발표요지집
• /
• pp.306-307
• /
• 2004

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.13-20
• /
• 2015

Many automotive companies are endeavoring to improve the quality of resistance spot welding by updating body-in-white (BIW) production line with adaptive control spot welding system to compensate the process disturbances such as gap, electrode wear, oxidized surfaces, poor fit up and adhesive etc. Most of the commercial adaptive weld controllers require proper "Initial Welding Schedule" or "Reference weld" to achieve compensation in welding parameters during real time welding. In this study, the compensation of a commercial adaptive weld controller had been observed and analyzed thoroughly for various process disturbances to find optimal initial welding schedule. It was observed that 90 percent of the expulsion current in constant current control as reference welding schedule conferred the maximum button diameter in adaptive control welding. Finally, effects of each disturbance in combined field disturbances system with adaptive control had also been confirmed with the design of experiment (DOE) by minitab(R)16 for combined disturbances situation and suitability of optimum initial weld current had also established with real body part validation test.