• 한국안전학회지
• /
• 제27권4호
• /
• pp.13-19
• /
• 2012

The purpose of this study is to extract the major factors related to the deterioration mechanism of white organic light-emitting diodes(WOLED) by performing accelerated testing of temperature, voltage, time, etc., and to develop an accelerated life test(ALT) model. The measurement results of the brightness of the WOLED exhibited that their average brightness tended to increase as the operating voltage increased and that the half-life period of the brightness appeared after approximately 400 hours when the operating voltage was 20V and the ambient temperature was $85^{\circ}C$. It could be seen that although the WOLED showed comparatively the same brightness when the initial acceleration began after the operating voltage was applied to it, its brightness changed excessively after the WOLED's thermal storage had been made. In addition, it was observed that the half-life period was reduced as the ambient temperature and applied voltage increased. The strength of the WOLED which had been maintained in the range of visible light at the maximum load was reduced by the deterioration of the organic light emitting material due to the influence of the operating voltage and temperature, and the reduction of emitted light was small at low voltage and temperature. It could be seen that the failure of the WOLED during the ALT was caused by wear due to load accumulation over time, and that Weibull distribution was appropriate for the life distribution and acceleration was established between test conditions. From the WOLED analysis, it is thought that factors influencing the brightness deterioration are voltage, temperature, etc., and that comprehensive analysis considering discharge control, dielectric tangent margin, etc., would further increase the reliability.

• E2M - 전기 전자와 첨단 소재
• /
• 제25권6호
• /
• pp.5-11
• /
• 2012

• 공업화학
• /
• 제27권5호
• /
• pp.455-466
• /
• 2016

유기 발광 다이오드(OLED)는 학문 및 산업분야에서 많은 관심을 받고 있다. OLED는 이미 휴대폰과 TV분야에서 상업화에 성공하고 있으며, 조명분야에서는 기존에 사용되어왔던 백열등, 형광등과는 다르게 면발광, 대면적, 초경량, 초박형, 유연성의 특징은 물론 낮은 에너지 사용 등의 차별성을 가지고 있기 때문에 최근 많은 관심을 받고 있다. 본 논문에서는 white organic light-emitting diode (WOLED)에 적용되는 대표적인 형광 및 인광 발광 재료들을 소개한다. 이렇게 선행 연구된 물질들을 이해하고 체계적으로 분류하는 것은 앞으로 새로운 발광 재료를 연구, 개발하는데 큰 도움을 줄 수 있을 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1407-1410
• /
• 2007

This work reports on three primary color fluorescent white organic light emitting diode (WOLED) with simple device structure where only a part of the hole transporting layer was doped with dye. The maximum luminance of the device reaches $35000\;cd/m^2$ at a drive voltage below 11V and external quantum efficiency of the device is above 1% in the wide range of luminance from 10 to $35000\;cd/m^2$ and reaches its highest 1.6% at $500\;cd/m^2$. The chromaticity coordinate shift of the device is negligible in this wide range of luminance. The blue shift of emission color with an increase of current density was attributed to the narrowing of recombination zone width with raise of current density.

• Journal of Information Display
• /
• 제9권3호
• /
• pp.23-27
• /
• 2008

This paper reports that well-balanced white emission with three primary colors can be achieved with a simple white organic light-emitting diode (WOLED) structure of ITO / $\alpha$-NPD (50 nm) / $\alpha$-NPD: Btp2Ir(acac) (8 wt%, 6 nm) / $\alpha$-NPD (5 nm) / BCP (3 nm) / $Alq_3$: C545T (0.5 wt%, 10 nm) / $Alq_3$ (40 nm) / LiF (0.5 nm) / Al (100 nm). The external quantum efficiency of the device reached 3.8% at a current density (luminance) of 4.6 mA/$cm^2$ (310 cd/$m^2$), and the maximal luminance of the device reached 19,000 cd/$m^2$ at 11.5 V. The insignificant blue shift of the emitting color with an increasing current density can be attributed to the narrowing of the exciton formation zone width.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1002-1005
• /
• 2006

In this study, we fabricated white organic light emitting devices (WOLEDs) to use single emission layer, DPVBi with partially doped Rubrene. To realize white color, rubrene with 3.6% was partially doped with the gap from interface between DPVBi and hole transport layer NPD in a definite DPVBi layer. As the gap was increased, the intensity of orange peak grows less and less. The WOLED with gap of $5\;{\AA}$ has the best color stability and its color coordination is (0.345, 0.321) at 6V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1120-1123
• /
• 2008

Efficient, color stable multi-EML WOLED have been fabricated using newly synthesized yellowish green dopant Ir(chpy)3 or Ir(mchpy)3. The devices have high external quantum efficiency of 11.7%, color rendering index of 87, variation of CIE coordinate of (0.02, 0.01) between 10 to 5000 cd/m2, and low roll-off in efficiency with increasing brightness.

• 공업화학
• /
• 제26권3호
• /
• pp.247-250
• /
• 2015

유기 발광 다이오드(OLED)는 학문 및 산업 분야에서 많은 관심을 받아왔다. OLED는 기존에 사용되고 있는 광원들과는 달리 면 발광, 친환경적인 에너지 사용, 대면적, 초경량, 그리고 초박형 등의 차별화된 특징을 가지고 있기 때문에 최근 조명 시장에서 많은 관심을 받고 있다. 게다가, OLED 조명은 LED 형광등을 대체할 수 있는 차세대 조명으로써 주목되고 있다. 본 논문에서는 white OLED (WOLED)에 적용되고 있는 대표적인 인광 발광 재료들을 소개하며, 특히 yellow, orange, red 인광 물질들의 화학구조와 소자효율을 정리하였다. 이러한 선행연구의 물질들을 이해하고 인광 물질들을 체계적으로 분류함으로써 새로운 발광 재료를 연구하고 개발함에 있어서 많은 도움이 되리라고 생각한다.