• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.74-75
• /
• 2021

This study attempted to study the setting time and compressive strength according to the sugar type through XRD. Setting time was found to be delayed the most when mixing white sugar, and setting time was promoted when mixing Saccharin and Aspartame. It was found that when white sugar and Grosvener siraitia were mixed, the compressive strength was higher than that of Control. Aspartame the age passed, C₃S decreased and Ca(OH)₂ increased.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.9-16
• /
• 2015

This study comparatively analyzed thermal characteristics of the green color, which is currently used the most, and other various colors of a rooftop urethane water proofing sheet. This study also analyzed the cooling performance by color of the water proofing sheet that fused cooling paints, and presented the effective water proofing sheet color for building energy savings. The experimental results are as follows: (1) The value of L (brightness) diminished, and brilliance also became lower from the white color to the black color, and thus, it was confirmed that relatively more heat was absorbed. In a and b chromaticity, which is the color attribute that ignores brightness, no special relationship was identified. (2) Considering that the cooling performance effect is bigger in summer than winter, due to heat reflection, the white water proofing sheet is more effective in building energy savings than the green water proofing sheet that is currently used the most. (3) The water proofing sheet's color has an impact more on cooling performance than the color of the background side of a structure on which water proofing sheet is installed. The experiment object of gray, of which background side is similar to cement mortar, was lower by $5.7^{\circ}C$ than the white background side.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.33-39
• /
• 2024

In this study, the basic properties of cement paste with varying replacement ratio of micro-silica and fumed silica were analyzed to determine the suitability of nanomaterials for use as concrete admixtures. Referring to the ultra-high strength mix, the fluidity of cement paste was evaluated according to the nanomaterial replacement rate and the compressive strength characteristics were compared and analyzed. The related properties of the reactive nanomaterials to the cement hydrate were analyzed using SEM and EDS to observe the microstructure and identify the components of the hydration product. The reactive nanomaterials used in this study had tap densities between 0.061 and 0.264 g/cm³, which were lower than SF. Micro silica exhibited excellent compressive strength properties with increasing replacement ratio, but fumed silica, unlike micro white, obtained excellent compressive strength at replacement ratio of 0.01~0.1 %. The same trend was observed in the hydration characterization.

• Journal of Periodontal and Implant Science
• /
• v.32 no.4
• /
• pp.769-779
• /
• 2002

This present study was carried out to find the effects of calcium aluminate cement($CaO\;{\cdot}\;Al_2O_3$, CAC), which has been developed with bio-compatibility and mechanical properties, in biological environments. Two different particle sizes of CAC - 3.5${\mu}m$ vs. 212${\sim}$250${\mu}m$ which is recommended in periodontal bone grafting procedures-were filled in 8mm calvarial defect in Sprague-Dawley rat. The specimens were examined histologically, especially the bone-cement interface and the response of surrounding tissues. The results are as follows; 1. In the control group, inflammatory cells were observed at 2 weeks. At 8 weeks, periosteum and dura mater were continuously joined together in the defect areas. But in the center of defect area were filled up with the loose connective tissues. 2. In the experimental group l($212{\mu}m{\sim}250{\mu}m$ particle), immature bone was formed and outermost layer was surrounded by osteoid layer at 2 weeks. Osteoblasts were arranged between immature bone and osteoid layer. And, osteoid layer was remained until 8 weeks after surgery. 3. In the experimental group 2, periosteum and dura mater lost its continuity at 2 weeks. Scattering of CAC particles and infiltration of inflammatory cells were observed, which this findings deepened at 8 weeks. The result of this study shows that when calvarial defects in white rats are filled with calcium aluminate cement of 212${\sim}$250${\mu}m$, the materials are to be bio-compatible in growth and healing on surrounding tissues. When further researches are fulfilled, such as direct bone adhesion and bone regeneration ability, it's possible that CAC could be applied to various periodontology fields in the future.

• Journal of the Korean Home Economics Association
• /
• v.38 no.11
• /
• pp.137-149
• /
• 2000

The Purpose of this study was to investigate actual condition about the modem adaptation of interior elements(floor, wall, ceiling, door & window) in traditional thatched roof house. The examined objects were interior space of 36 restaurants and cafes in Seoul and Kyung-Ki Do area. 1. Floor: Jang-pan was mostly alternated with linoleum which huts Jang-pan pattem. Wumul-maru was adapted from the original and Jang-maru was alternated with wood or linolium which has western state Jang-maru pattern. Mud was adapted from the original or alternated with slate stone or rough finish cement. 2. Wall: Rice proper was alternated with rice paper book witch has chinese character, paper for parcels or modem wall paper. Plaster-white paint or white handy coat. Mud-mud color paint or bamboo stick witch located in the mud wall orginal. Log-half cut log. Wooden board-without cross bar or irregular form. 3. Ceiling: Yondung-Chongang was mostly adapted from the original and Banja-Chonjang was alternated with rice paper book which has Chinese character or modem wall paper. 4. Door and Window: Ttisal-mun and Panjang-mun were adapted from the original. Wan and A’character door and window were simplified character itself.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.189-190
• /
• 2020

The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.677-687
• /
• 1996

This study was conducted to evaluate the tissue responses histologically to three root canal cements : Sealapex, AH-26, and zinc oxide-eugenol cement. Twelve white female Sprague-Dawley rats, weighing between 350 and 400 gm, were anesthetized with an intraperitoneal injection of Ketamine hydrochloride(0.4 ml). After shaving the sites selected(left and right scapular areas, left and right pelvic areas), the animal's backs were scrubed with soap and water, and sterilized with absolute alcohol. Each material was mixed to a thin consistency to flow out easily through a 24-guage needle, and loaded into a sterile, disposable plastic 1-ml syringe. All of the rats were injected subcutaneously with 0.1 ml of the three test sealers. Normal saline was used as a control. Animals were sacrificed after 48hr, 1, 4, and 12 weeks by overanesthetization using jars containing anesthetic ether. The tested sites were surgically removed with the surrounding tissue and fixed with 10% formalin. After 48 hours specimens were embedded in paraffin, sectioned to an average thickness of $6{\mu}m$ thick, stained with hematoxylin-eosin. The slides were examined under the light microscope. The results were obtained as follows 1. All material except the control showed various degree of inflammation on 48 hr. 2. Sealapex : In early stage, severe inflammatory cell infiltration was observed. At the 4th weeks observation, graunlomatous tissue with macrophage and foreing body giant cells containing many dark particles in their cytoplasm was observed. 3. AH-26 : Mild inflammatoy reaction was observed with AH-26 throughout the experimental period. 4. Zinc oxide-eugenol cement : Severe inflammatory cell infiltration, necrosis along the material, edema could be seen in early stage. Zinc oxide-eugenol cement maintained a moderate/severe reaction throughout the experimental period.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.473-478
• /
• 2010

Objectives: This study was performed to investigate the biocompatibility of newly introduced Bioaggregate on human pulp and PDL cells. Materials and Methods: Cells were collected from human pulp and PDL tissue of extracted premolars. Cell culture plate was coated either with Bioaggregate or white MTA, then the same number of cells were poured to cell culture dishes. Cell attachment and growth was examined under a phase microscope after 1,3 and 7 days of seeding. Cell viability was measured and the data was analyzed using Student t-test and one way ANOVA. Results: Both types of cells used in this study were well attached and grew healthy on Bioaggregate and MTA coated culture dishes. No cell inhibition zone was observed in Bioaggregate group. There was no statistical difference of viable cells between bioaggreagte and MTA groups. Conclusions: Bioaggregate appeared to be biocompatible compared with white MTA on human pulp and PDL cells.

• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.11-18
• /
• 1998

Single phase, narrow beam X-ray attenuation data were obtained using various construction materials concrete, white block, red block, 3 hole block, gypsum board, artificial marble, cement, plate glass, wood, and lead. Tube voltages of 60, 80, 100, 120 kVp were employed and the resulting curves were compared to transmission data found in this report. The shielding methodology and the derivation of equations used for determination of barrier requirements were presented in NCRP 49. We could calculate the X-ray exposed dose after attenuation and thickness of protection barrier in the clinic facilities accordingly. For the purpose of maximizing the benefit/cost ratio to diagnostic shielding, various construction materials must be installed carefully and attnuation rate considered thoroughly.

• The Journal of the Korean dental association
• /
• v.49 no.1
• /
• pp.22-32
• /
• 2011

This paper reviewed the following subheadings and a few selected references in each section were discussed: ${\cdot}$ Sealant placed over caries; is it possible? Initial caries which is not sticky during proving is possible to be placed with sealants. ${\cdot}$ Prophylaxis of fissure; which method is most effective? Mechanical preparation with fissurotomy or resin polishing bur is one of the most effective method to clean the pit and fissure. ${\cdot}$ Glassionomer cement as a sealant; GIC, wheather it released fluoride or not, cannot be as cost-effective as resin-based sealants. ${\cdot}$ Sealant products; Color(white vs opaque), fluoride(containing vs not), filler component(filled vs non-filled) do not influenced the quality and retention of sealants. ${\cdot}$ Use of intermediate bonding agent to improve retention; Intermediate bonding may increase the retention rate of sealants ${\cdot}$ Penetration method of sealants; Several methods including waiting before light curing are recommended.