• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.145-156
• /
• 2021

Ultrasonic Nanocrystal Surface Modification (UNSM) is a peening technology that generates elastic-plastic deformation on the material surface to which a static load of a air compressor and a dynamic load of ultrasonic vibration energy are applied by striking the material surface with a strike pin. In the UNSM-treated material, the structure of the surface layer is modified into a nano-crystal structure and compressive residual stress occurs. When UNSM is applied to welds in a reactor coolant system where PWSCC can occur, it has the effect of relieving tensile residual stress in the weld and thus suppressing crack initiation and propagation. In order to quantitatively evaluate the compressive residual stress generated by UNSM, many finite element studies have been conducted. In existing studies, single-path UNSM or UNSM in a limited area has been simulated due to excessive computing time and analysis convergence problems. However, it is difficult to accurately calculate the compressive residual stress generated by the actual UNSM under these limited conditions. Therefore, in this study, a minimum finite element peening analysis area that can reliably calculate the compressive residual stress is proposed. To confirm the validity of the proposed analysis area, the compressive residual stress obtained from the experiment are compared with finite element analysis results.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.41-60
• /
• 2022

Purpose - The policy implications of free trade agreements have traditionally been a matter of debate among economists. The official signing of the Korea-China Free Trade Agreement provides economists with a quasi-natural experiment to analyze the FTA's policy effects. This article aims to more accurately understand the impact of Korea's FTA accession on the macro economy. Design/methodology - This study adopts the counterfactual method based on panel data to find common factors in the generation process of macro data to fit the counterfactual path, to accurately evaluate the effect of the macro policy. Findings - Our research results show that the signing of the Korea-China FTA has a relatively significant short-term positive effect on Korea's economic growth. On average, Korea's real GDP growth rate has increased by 2.1%. This study finds evidence in support of FTA signing not having a significant impact on Korea's GDP growth in the long run. Additionally, we evaluated the impact of the FTA on Korea's imports and exports and found that it had a significant positive impact in the short term, but the trade effect of the FTA is significantly affected by the external macro-environment. Originality/value - First, this study uses macro panel data at the national level to examine the impact of the Korea-China FTA on Korea, and more accurately describes the policy effect of the FTA. Second, our empirical results show that the Korea-China FTA policy impact is subject to occasional changes in the external environment, such as the geopolitical conflict (crisis) between Korea and China, and the US-China trade war. Finally, the analysis shows that the short-term effect of FTA is significant but the long-term is uncertain, which provides empirical evidence for the debate on whether joining FTA can promote national economic growth.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1471-1485
• /
• 2013

The purpose of this study was to develop a HAM (Heuristic Attention Model) by analyzing the difference between eye movements according to the science achievement of elementary school students on discrimination task. Science achievement was graded by the results of the Korea national achievement test conducted in 2012 for a random sampling of classes. As an assessment tool to check discrimination task, two discrimination measure problems from TSPS (Test of Science Process Skill, developed in 1994) which were suitable for an eye tracking system were adopted. The subjects of this study were 20 students from the sixth grade who agreed to participate in the research. SMI was used to collect EMD (eye movement data). Experiment 3.2 and BeGaze 3.2 programs were used to plan experiments and analyze EMD. As a result, eye movements of participants in discrimination tasks varied greatly in counts and duration of fixation, first fixation duration, and dwell time, according to students' science achievement and difficulty of the problems. By the analysis of EMD, strategies of the students' problem-solving could be found. During problem solving, subjects' eye movements were affected by visual attention; bottom-up attention, top-down attention and convert attention, and aflunter attention. In conclusion, HAM was developed, and it is believed to help in the development of a science learning program for underachievers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.79-86
• /
• 2016

About 75% of software security incidents are caused by software vulnerability. In addition, the after-market repairing cost of the software is higher by more than 30 times than that in the design stage. In this background, the secure coding has been proposed as one of the ways to solve this kind of maintenance problems. Various institutions have addressed the weakness patterns of the standard software. A new Korean programming language Saesark has been proposed to resolve the security weakness on the language level. However, the previous study on Saesark can not resolve the security weakness caused by the API. This paper proposes a way to resolve the security weakness due to the API. It adopts a static analyzer inspecting dangerous methods. It classifies the dangerous methods of the API into two groups: the methods of using tainted data and those accepting in-flowing tainted data. It analyses the security weakness in four steps: searching for the dangerous methods, configuring a call graph, navigating a path between the method for in-flowing tainted data and that uses tainted data on the call graph, and reporting the security weakness detected. To measure the effectiveness of this method, two experiments have been performed on the new version of Saesark adopting the static analysis. The first experiment is the comparison of it with the previous version of Saesark according to the Java Secure Coding Guide. The second experiment is the comparison of the improved Saesark with FindBugs, a Java program vulnerability analysis tool. According to the result, the improved Saesark is 15% more safe than the previous version of Saesark and the F-measure of it 68%, which shows the improvement of 9% point compared to 59%, that of FindBugs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2022

In this study, in order to directly evaluate the prestress of the PSC structure, a new sensor module based on the measurement of the deformation of concrete was proposed using hetero-core optical fibers and performance tests were performed. In a hetero-core optical fiber, optical loss occurs when a specific part of the transmission path is bent, and the amount of optical loss changes linearly according to the magnitude of the curvature. In order to confirm the measurement performance of the sensor module and the applicability of the optical fiber, the sensor module was deformed and the light passing through the optical fiber was converted into wattage and measured. It can be seen that the light passing through the optical fiber has a linearity of 0.9333 in relation to the deformation while generating the maximum deformation of 0.5 mm at a rate of 0.12 mm/min in a cylindrical concrete specimen with a diameter of 15 cm and a height of 35 cm in which the sensor module is embedded. Based on the results of this experiment, it is judged that it is possible to directly evaluate the prestress of a PSC structure by embedding a sensor module using a hetero-core optical fiber in the structure and measuring the compression deformation in concrete. It is judged that it can be used as useful data for the development of a sheath tube integrated sensor module to be applied to be applied to the girder model experiment.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.65-70
• /
• 2021

River-side Embankment collapse involves various causes. The embankment collapse due to internal erosion around embedded structures reaches up to more than 10% in Korea. Many studies are being attempted to prevent from the collapse of the embankment rooted from overtopping and instability as well as internal erosion. One of them is the study on the application of biopolymers. The application of biopolymers to soils are divided into enhancing strength, vegetation and erosion resistance. This study investigated the effect of biopolymer treated soil on erosion resistance. The main goal of the study is to obtain basic data for real-scale experiments to verify the effectiveness of biopolymer treated soil embankment including a review of the collapse pattern in the model embankment with various test conditions. The optimized experimental conditions were selected by examining the erosion patterns according to each induction path with three compaction degree of the model embankment. As a result of the experiment, the internal erosion rate in the embankment to which the biopolymer treated soil was applied is greatly reduced, and it could be concluded that it might be applied to the actual embankment. However, in this study, the conclusion was drawn only within the scaled-down model embankment. In order to practically apply the biopolymer treated soil to the embankment, the study considering the scale effect would be needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.417-429
• /
• 2008

This paper presents an experimental result to evaluate the redundancy in continuous span two plate-girder bridges which are generally classified as a non-redundant load path structure. The experiments were performed when one of the two girders is seriously cracked. To estimate the effects of bottom lateral bracing on the redundancy, the experiment variable was considered as the bottom lateral bracing, and two 1/5-scaled bridge specimens with and without lateral bracing system were fabricated. The ultimate loading tests were conducted on the damaged specimens with an induced crack at a girder in the side span. The test results showed that the load carrying capacity of damaged specimen with bracing was about 1.2 times higher than that without bracing. To evaluate the redundancy in each specimen, numerical analysis was performed to calibrate the difference of dead load between the actual bridge and the test specimens. When the dead load calibration is considered, the results showed that a continuous span two-girder bridges have a reasonable redundancy even without lateral bracing. Especially, the level of redundancy is increased by about 1.8 times when the lateral bracing is provided.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1561-1579
• /
• 1969

In Korea, the duty of water in paddy fields was measured at the Agricultural Experimental Station in Suwon about 60 years ago. After that time some testing has been made in several places, but the key points in its experiment were the water depth of evapo-transpiration. Improved breeds, progress in cultivation and management techniques as well as development of measuring apparatus in recent years have necessitated the review of the duty of water in paddy fields. The necessity of reviewing the conventional methods has become even more important, as no source of information has been made available through survey of water utilization on a soil use basis which requires data on peculiar features of the water depth of evapo-transpiration. For example, the duty of water in paddy field is largely affected by the water depth of evapo-transpiration in connection with the wetted paddy field, whereas in connection with the normal paddy fields without this characteristic the vertical percolation become the predominant factor in measuring the decreasing depth of water. Therefore, it becomes important. that not only the water depth of evapotranspiration but also the vertical percolation process should also be observed in order to arrive at a realistic conclusion. As the vertical percolation has aclose relationship to the height of the underground water, the change of the latter can be measured. As the conclusion of this experiment, the following subjects are indicated. 1. In order to determine the economic duty of water in paddy fields on a basis of varying soil features, the varying soil features in the benifited area should be investigated thoroughly. The water depths of evapo-transpiration(ET) ratio to evaporation in the evaporator(V) on a basis of the varying soil features are as follows: clay loam ET/V = 1.11, loam ET/V = 1.64, sandy loam ET.V = 1.63 2. The decreasing depth of water consists of the water depth of evapotranspiration, the vertical per colation and the percolation of foot path. Among these three, the percolation of foot path can be utilized again. 3. As the result of this experiment, it shows the decreasing depth of water as follows. clay loam 9.3 mm/day, loam 13.5mm/daty, sandy loam 15.3mm/day 4. On a basis of the varying soil features and the height of the underground water, the vertical percolation varies. 5. The change of the vertical percolation on a basis of the varying soil features shows as follows: clay loam $1{\sim}2$ mm/day, loam $2{\sim}3$mm/day, sandy loam $3{\sim}4$mm/day 6. The level of the underground water changes sensibly by priority of clay loam, loam, sandy loam. When it rains, the level of the underground water rises fast and falls down slowly. 7. The level of the underground water changes within the scope of 25cm 8. The transpiration ratio is given in table 8 and their value are as follows: clay loam 168.8, loam 255.6, sandy loam 272.5

• Journal of Korean Academy of Nursing
• /
• v.23 no.1
• /
• pp.107-117
• /
• 1993

This study was a clinical Quasi-experiment to examine the effects of the range of motion exercise on powerlessness and life satisfaction among the E-Institutionalized elderly in Pusan. The purpose was to test the effect of the range of motion exercises on powerlessness and life satis-faction, and to examine the correlation between powerlessness and life satisfaction. The subjects for this study were 54 elderly people, both were over 60 and residing at I-Institution in Pusan. The research samples of 54 elderly were divided into an experimental and control group by matching randomized assignment. The instruments for this study were the Assessment Tool of Powerlessness in the elderly developed by Miller, Life satisfaction developed by Yoon Jin, and the Active-Passive Range of Motion Exercise Program which was developed and utilized by Shin, Jae-Shin. The data were collected from December 15, 1990 to November 1991. The paired t-test, t-test and ANCOVA were used to test hypothesis I and II, related to the Effect of the Range of Motion Exercises to powerlessness and life satisfaction. To identify the relationship of the range of motion exercises to powerlessness and life satisfaction, path analysis was done through multiple regression. The interrelationship of the variables was analyzed using t-test paired t-test. The results of the three hypothesis can be summarized as follows : 1. Hypothesis I -the experimental group which participated in the Range of Motion Exercise gets lower powerlessness score than that of the control group-was accepted by t-test (t = -3.40, p = .001) but not accepted by ANCOVA (F = .1, p =.96). 2. Hypothesis II - the experimental group which participated in the Range of Motion Exercise gets a higher Life Satisfaction Score than that of the control group-was not supported by t-test(t = 1.01, p = .316) but was accepted by ANCOVA (F = 4.39, p = .006). 3. Hypothesis III - if the powerlessness Score becomes higher, the Life Satisfaction Score will be-come lower - was accepted by Pearson Correlation Coefficient (pre-exercise : r : -.34, p=.006), (post exercise : r = -.06, p=.32) . The relation-ship between the score of powerlessness and life satisfaction was negatively correlated. The results obtained clearly showed that the effects of the range of motion exercises on powerlessness and life satisfaction are beneficial to the elderly The relation between the scores of powerlessness and life satisfaction was negatively correlated and the range of motion exercise had a direct influence to powerlessness. Therefore, it is concluded that the relationship between powerlessness and life satis-faction was not a causal one. Also it is concluded that the range of motion exercises can be applied as a nursing intervention to reduce powerlessness and to improve life satisfaction in the elderly.

• Journal of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.186-192
• /
• 1975

In the course of anthracite briquet combustion, air draft is usually controlled to continue burning of definite amount of briquet in the conventional hollow clay cylinder with air inlet hole open for given time, so that a large amount of CO tends to be produced. Therefore, it is necessary to establish an improved combustion process to depress the yielding rate of CO and for this purpose, we performed a basic experiment in which combustion rate of CO was measured in the mixture of $N_2, O_2 $and CO gas with or without the presence charcoal at the various temperature. The observed results showed that the burning temperature of CO is about 680${\sim}700^{\circ}C$, further burning rate of it was increased with increasing the amount of draft. From these facts, longer combustion time and low CO generation are thus contradictory to each other and it has been long desired to make those two compatible somehow. The purpose of the present investigation lies in designing an effective new briquet stove to meet the above requirements. The essential feature of the new briquet stove consisted in the use of two hollow iron cylinders with different inside diameter. A cylindrical air jacket thus formed served as a path through which small amount of secondary air run from the bottom of the stove to the upper vent holes. Heat exchange occurred between the upgoing secondary air and the burning briquet, which lowered the combustion temperature of the briquet. The results observed were selfevident as anticipated. It was confirmed that the combustion time was increased tolerably due to the heat loss from the combustion zone and that CO in the flue gas was reoxidized at the upper portion of the stove by the upgoing hot secondary air. By this reoxidation reaction the concentration of CO in the flue gas was found to be about 1/20 of that in case the conventional clay cylinder was used as briquet jacket.