• International Journal of Railway
• /
• 제2권1호
• /
• pp.8-17
• /
• 2009

The wheelset, its functions and position under the train is the prime safety-critical component. Whether in design, qualification, manufacturing or maintenance, the wheels and axles have been the focus of special attention at SNCF for over 25 years and the French Railways are actively involved in various Research and Development work towards interoperability between the railways, railway reliability and running safety.

• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2012

윤축 동역학 해석은 철도차량 동역학 해석의 정밀도를 결정하는 핵심 요소이다. 본 연구에서는 정밀한 3차원 차륜-레일 접촉 해석을 윤축의 강체 운동 방정식에 적용하는 방법으로 3차원 윤축 동역학 해석을 수행하였다. 곡선 주행시 플랜지 접촉에 의해 차륜-레일 2점 접촉이 발생할 때 윤축의 동역학 해석이 가능한 수치해석 절차를 개발하였다. 윤축의 구속조건식과 강체 동역학 방정식을 Runge-Kutta 방법을 이용하여 수치적분을 수행하였다. 제안된 윤축 동역학 해석 결과는 VI-RAIL을 이용한 해석결과와 비교 분석하여 타당성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제21권9호
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• 한국철도학회논문집
• /
• 제8권3호
• /
• pp.210-215
• /
• 2005

The safety evaluations of railway wheelsets make use of the static fracture toughness obtained in ingot materials. The static fracture toughness of wheelset materials has been extensively studied by experiments, but the dynamic fracture toughness with respect to wheelset materials has not been studied enough yet. It is necessary to evaluate the characteristics of the fracture mechanics depending on each location for a full-scale wheelset for high-speed trains, because the load state for each location of the wheelset while running is different the contact load between the wheel and rail, cyclic stress in the wheel plate, etc. This paper deals with the fracture toughness depend on load rates. The fracture toughness depending on load rate data shows that once the downward curve from quasi-static values was reached, subsequent values showed a slow increase with respect to the impact velocity. This means that dynamic fracture toughness should be considered in the design code of the wheelset material.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.189-194
• /
• 2007

To reduce the cost and time of transport in Eurasian railroad networks such as TKR, TCR and TSR owing to the problem of different track gauges(narrow/standard/broad gauge), it is important to develop the gauge - adjustable wheelset system to adapt easily to these gauges. Moreover, freight trains having the gauge - adjustable wheelset will be run various curved tracks in railroad networks. Therefore, to assure the safety of the gauge-adjustment wheelset system, it is necessary to evaluate integrity of locking parts in the system using stress analysis. In this study, it was performed to contact stress analysis of locking parts by using FEA(finite element analysis) simulator during the gauge changeover operation and freight trains' service in the curved track, respectively.

• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.5-17
• /
• 1985

Dynamics of railway vehicles are strongly influenced by the wheel/rail contact forces. Wheel/rail contact geometric characteristics are important parameters to determining wheel/rail contact forces. In general, geometric relations between wheel and rail are represented by nonlinear functions of the wheelset lateral excursion and the relative yaw angle. There are some analytical and experimental studies to show the influences of the wheelset lateral displacement on wheel/rail geometric relations. Recently radial steering bogie which is designed to have flexible yaw motions of wheelsets was developed to improve curve negotiation performance. The radial steering bogie makes it important problem to study the effects of wheelset yaw motion on wheel/rail geometric relations. This paper describes the method to analyze 3-dimensional wheel/rail contact geometry considering wheelset yaw motion and describes also some computer simulation results.

• 한국철도학회논문집
• /
• 제8권5호
• /
• pp.444-453
• /
• 2005

The safety evaluations of railway wheelsets make use of the static fracture toughness obtained in ingot materials. The static fracture toughness of wheelset materials has been extensively studied by experiments, but the dynamic fracture toughness with respect to wheelset materials has not been studied enough yet. It is necessary to evaluate the characteristics of the fracture mechanics depending on each location for a full-scale wheelset for high-speed trains, because the load state for each location of the wheelset while running is different the contact load between the wheel and rail, cyclic stress in the wheel plate, etc. This paper deals with the fracture toughness depend on load rates. The fracture toughness depending on load rate data shows that once the downward curve from quasi-static values was reached, subsequent values showed a slow increase with respect to the impact velocity. This means that dynamic fracture toughness should be considered in the design code of the wheelset material.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2156-2162
• /
• 2008

To reduce the cost and the time of transport in Eurasian railroad networks such as TKR, TCR and TSR owing to the problem of different track gauges (narrow/standard/broad gauge), it is important to develop the gauge - adjustable wheelset system to adapt easily to these gauges. The gauge - adjustable wheelset system in the transcontinental railway have been proposed as a more effective way in comparison with other techniques for overcoming difference in track gauges. Assume that the freight train with gauge adjustable wheelset system is running from domestic train network to TCR, TSR in Eurasian continent, it is necessary to estimate the safety of this system. This study is evaluated at examination of safety for freight train with gauge adjustable wheelset system by simulated durability analysis. Moreover, the predicted fatigue life at running track using the durability simulator was verified by the durability test according to UIC standard.

• International Journal of Railway
• /
• 제1권1호
• /
• pp.1-5
• /
• 2008

The railway system requires safety and reliability of service of all railway vehicles. Suitable technical systems and working methods adapted to it, which meet the requirements on safety and good order of traffic, should be maintained. For detection of defects, non-destructive testing methods-which should be quick, reliable and cost-effective - are most often used. Since failure in railway wheelset can cause a disaster, regular inspection of defects in wheels and axles are mandatory. Ultrasonic testing, acoustic emission and eddy current testing method and so on regularly check railway wheelset in service. However, it is difficult to detect a crack initiation clearly with ultrasonic testing due to noise echoes. It is necessary to develop a non-destructive technique that is superior to conventional NDT techniques in order to ensure the safety of railway wheelset. In the present paper, the new NDT technique is applied to the detection of surface defects for railway wheelset. To detect the defects for railway wheelset, the sensor for defect detection is optimized and the tests are carried out with respect to surface and internal defects each other. The results show that the surface crack depth of 1.5 mm in press fitted axle and internal crack in wheel could be detected by using the new method. The ICFPD method is useful to detect the defect that initiated in railway wheelset.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1940-1945
• /
• 2007

The wheelsets are one of most important component: damages in wheel tread and press fitted axle are a significant cost for railway industry. Since failure in railway wheelset can cause a disaster, regular inspection of defects in wheels and axles are mandatory. Ultrasonic testing, acoustic emission and eddy current testing method and so on regularly check railway wheelset in service. However, it is difficult to use this method because of its high viscosity and because its sensitivity is affected by temperature. Also, due to noise echoes it is difficult to detect defects initiation clearly with ultrasonic testing. It is necessary to develop a non-destructive technique that is superior to conventional NDT techniques in order to ensure the safety of railway wheelset. In the present paper, the new NDT technique is applied to the detection of surface defects for railway wheelset. To detect the defects for railway wheelset, the sensor for defect detection is optimized and the tests are carried out with respect to surface and internal defects each other. The results show that the surface crack depth of 1.5 mm in press fitted axle and internal crack in wheel could be detected by using the new method. The ICFPD method is useful to detect the defect that initiated in the tread of railway wheelset.