• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1270-1276
• /
• 2003

This paper describes an analytical method for wheel wear prediction. The outputs from vehicle dynamic software are used to calculation the wheel wear. Two calculation examples are shown for a high-speed line and a conventional line. Through the comparison of two cases, we can see the wheel wear characteristics on the conventional line and the high-speed line. The conventional line has many curved tracks that cause severe wheel flange wear. The influences of curve radius on wheel wear are also described considering the operational performance of the high speed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear railway wheels.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.551-558
• /
• 2011

To analyze the effect of wear of wheel profile on the running stability of rolling-stock, theoretical and experimental studies were conducted on the profiles used in conventional lines. In experiment using 1/5 scale model to verify the results of the theoretical analysis, the test results of the critical speed for worn wheel profile samples show similar trend. In case of the conical type wheel profile(Profile 40), the equivalent conicity is increased with flange wear. But in case of the arc type wheel profile(Profile 20h), the equivalent conicity is decreased with flange wear. And the critical speed of the bogie was inverse proportion to the equivalent conicity. It is shown that the variation of the critical speed with the wheel wear could be changed according to the design concept and wear pattern of wheel profile. Results of the theoretical and experimental studies are discussed here.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.38-45
• /
• 1996

A new grinding wheel was developed for the high performance grinding of difficult-to-grinding materials. The grinding performance of the newly developed wheel including grinding forces, grinding ratio, and surface roughness of ground surface was evaluated through experiments. Experimental results show that the performance of the newly developed wheel is superior to the conventional alumina wheel and comparable to the Sol-gel wheel. An experimental investigation on the wear of alumina grinding wheel was also carried out. The experiments consist of the measurements of fracture strength of the abrasive grains, grinding force, and the area of wear flats of grinding wheels. Microscopic examination of abrasive grains was executed to observe the progress of wheel wear. The results indicate that the 32A grain, which has relatively lower fracture strength, wears out faster than 5SS and 5SG. The wheel wear occurs much faster in wet grinding than in dry grinding. It has also been found that the grinding forces increase logarithmically with increasing wear flats.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.806-812
• /
• 2008

Many kinds of rolling-stocks that have various control methods are being operated by Seoulmetro which is a history of a city railroad rolling-stock. Seoulmetro is being faced with a wheel management comparing of other lines with a perpendicular wear of wheel and a side damage, and so on, by operating several cars at a loop line. This is causing maintenance expenses increase and deteriorating a fusibility of rolling-stock, for it has an effect on a rolling-stock using. A cutting pattern of wheel and a wear form affect the expected span of a wheel. A wheel cutting cause is classifed into cutting for reprofiling of a flange wear of wheel and for removing every kind defect which originates from wheel wear. In this study, Seoulmetro exhibit a stable rolling-stock use method and a reasonable management method of wheel, analysing wheel exchange condition and cutting management of wheel.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.130-136
• /
• 2004

The rolling-stocks on conventional line have suffered wheel problems due to the incompatibility between wheel and track condition. Especially, The 1:40 coned wheel profile's wear is very severe and these increase wheel maintenance cost. Thus we designed several arc-type wheel profiles coned 1:/20 to reduce the wheel flange wear and analyzed the dynamic performance of designed profiles. Tests carried out in service line to analyse the dynamic performance and verify the wear reduction for two cases of profiles. Test results shows the equal level of dynamic performance and the improvement of wheel flange wear compared with the conical wheel profile coned 1:40.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1658-1662
• /
• 2007

The tire uneven wear has been an ongoing concern for a long time, and one of customer's complaints too. This paper deals with uneven wear improvement of passenger car tires, to have tested the tire wear levels by each wheel alignment set (according to changing toe and camber) using taxis. The pre-set wheel alignments on test vehicle were gained by energy friction simulation of tire. The result of this experiment was as follows : First, verified the effects of initial wheel alignment (adjusted at Curb Vehicle Weight) to minimize tire uneven wear. Second, tire uneven wear makes tire life much shorter than even wear does.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.172-177
• /
• 1998

An experimental study on the prediction of grinding wheel wear by dual detection methods was conducted by the laser displacement and acoustic emission(AE) system. The laser displacement sensor was located above the head of the grinding wheel and the AE sensor was set under the workpiece, where the wheel were condition can be detected. It was found that the dual detection methods by laser displacement system and AE system made it possible to predict the wheel wear. From the experiments, the root mean square(RMS) values both methods was found to be proportional to the grinding wheel wear.

• Tribology and Lubricants
• /
• v.19 no.4
• /
• pp.187-194
• /
• 2003

This paper describes the characteristics of wheel wear of high speed train running on the conventional line. Conventional line has many curved tracks that cause severe wheel flange wear. The influences of lubrication, cant deficiency, curve radius on wheel wear are also described considering the operation performance of the highspeed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear of railway wheels.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.651-655
• /
• 2003

The rolling-stocks used in conventional line have suffered wheel problems due to lack of adaptability with track. These brought out severe wheel flange wear, these have caused unstable ride characteristics of rolling-stock. Especially, Wheel flange wear is severely influenced by wheel profile but lateral suspension characteristics. This study was started to induce wheel profile suitable for domestic railway environment. Thus, we analyzed the wear characteristics of wheel profiles that are being applied to railway rolling-stock in KNR. To analyze wheel wear characteristics, we have conducted experiment studies for passenger rolling-stock and obtained useful datum.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.854-859
• /
• 2008

In a railway vehicle, contact between wheel and rail is a peculiar characteristic and variations of wheel and rail profile influence on the dynamic characteristics of railway vehicle. Thus the variations of the wheel and rail profile are very important in railway dynamics. Recently a research relating to active steering to improve the curving performance of vehicle is progressing actively at home and abroad. In this field, a pre-study for the wheel/rail contact geometry is needed and especially the variation of the wheel/rail contact geometry with wheel wear is the key design parameter to develop the controller of the active steering bogie. In this paper, we have experimentally studied to analyze the variation of the wheel/rail contact geometry with wheel wear as a pre-study to develop the active steering bogie for electric multiple unit (EMU). For this, we have made an experiment with EMU operating in curving area. We have measured the wear profiles of the wheel of the test vehicle and analyzed the wheel/rail contact geometry with a mileage of the test vehicle. In experiment with test vehicle, we have got the useful data to design the steering controller of the wheelset.