• 한국재난정보학회 논문집
• /
• 제2권1호
• /
• pp.39-52
• /
• 2006

In this paper, an analytical and experimental study was performed in order to determine the effects of interaction between vehicle and structure. Results presented in the paper show that analytical method including moving load effect can investigate the trend of structural response due to dynamic interaction between vehicle and structure. The wheel tracking machine fitted with 2-axle test vehicle can demonstrate more accurate dynamic interaction between vehicle and structure than the wheel tracking machine fitted without 2-axle test vehicle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2314-2316
• /
• 1999

This study describes the results of aging characteristics of polymer insulators through the tracking wheel test. In order to evaluate the reliability of polymer insulators, 4 polymer insulators which used in the field were selected. Electrical tests such as power frequency voltage test, steep-front impulse voltage test were performed after tracking wheel test. Chemical structure and contact angle were measured for investigating an aging characteristics. Although some changes have occurred on the surface of insulator, there are no critical changes between new and tracking wheel tested insulator.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.97-107
• /
• 2005

반복주행시험에서 얻은 침하깊이와 동적안정도는 아스팔트 혼합물의 소성변형 저항성 평가를 위하여 널리 사용되고 있다. 하지만 바퀴의 재질에 따라 다르게 얻어지는 실정이다. 따라서 본 연구는 반복주행시험시 핵심요소라 할 수 있는 바퀴의 재질에 대하여 연구하였다. 이를 위하여 2종류(7.5mm, 15mm)의 고무바퀴와 고무를 씌우지 않은 강재(Steel)바퀴 한 종류를 사용하였으며, 반복주행시험을 통하여 바퀴재질에 따른 혼합물의 소성변형 저항성을 평가하였다. 또한 반복주행시험에서 얻은 침하깊이와 동적안정도를 Kim test의 변형강도와의 상관성 분석을 통하여 반복주행 시험용 최적 바퀴를 선정하는데 이용하였다. 고무두께가 15mm, 7.5mm, 0mm에 대한 상관성 분석결과 각각 0.7, 0.8. 0.9 이상이 나와 고무를 사용하지 않은 강재바퀴가 변형강도와의 상관성이 가장 높은 값을 보여주어 향후 반복주행시험시 강재바퀴의 사용이 소성변형을 예측하는데 가장 유리 할 것으로 판단된다.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.461-468
• /
• 2005

This paper proposes a wheel-assembly automation system, which assembles a wheel into a hub of a vehicle hung to a moving hanger in a car manufacturing line. A macro-micro manipulator control strategy is introduced to increase the system bandwidth and tracking accuracy to ensure insertion tolerance. A camera is equipped at the newly designed wheel gripper, which is attached at the center of the end-effector of the macro-micro manipulator and is used to measure position error of the hub of the vehicle in real time. The redundancy problem in the macro-micro manipulator is solved without complicated calculation by assigning proper functions to each part so that the macro part tracks the velocity error while the micro part regulates the fine position error. Experimental results indicate that tracking error satisfies the insertion tolerance of assembly $({\pm}1mm)$, and thus it is verified that the proposed system can be applied to the wheel assembly task on a moving hanger in the manufacturing line.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.530-537
• /
• 2008

This paper describes the results of a study on the tracking performance of outdoor insulating materials based on the rotating wheel dip test(RWDT). And, the influence of surface degradation was evaluated through such as measurement of the flashover voltage after and before tracking test, also aspects of surface degradation using scanning electron microscopy. The time to tracking breakdown of treated filled specimen is longer than untreated filled specimen. And, after the RWDT, the surface of specimen by adding untreated filler appeared heavy erosion. It was found that the addition to surface treated filler, the better tracking resistance. In the RWDT, the breakdown specimen is not affected by the dry flashover voltage, despite the fact that the surface degradation of tracking test has different state on each specimen. This suggests that wet flashover voltage play an important role in evaluating of tracking and erosion on the surface degradation in tracking test. And, the flashover voltage of specimen under wet conditions are greatly affected by the salt concentration and degree of degradation by the RWDT Because of hydrophobicity and degree of degradation by the RWDT, the flashover voltage of treated filled specimen is higher than that of untreated filled specimen. Different types of specimen may have different hydrophobicity and their surface state under contaminated conditions may not be the same.

• 로봇학회논문지
• /
• 제15권3호
• /
• pp.221-232
• /
• 2020

In a four-wheel independent drive platform, four wheels and motors are connected directly, and the rotation of the motors generates the power of the platform. It uses a skid steering system that steers based on the difference in rotational power between wheel motors. The platform can control the speed of each wheel individually and has excellent mobility on dirt roads. However, the difficulty of the straight-running is caused due to torque distribution variation in each wheel's motor, and the direction of rotation of the wheel, and moving direction of the platform, and the difference of the platform's target direction. This paper describes an algorithm to detect the slip generated on each wheel when a four-wheel independent drive platform is traveling in a harsh environment. When the slip is detected, a compensation control algorithm is activated to compensate the torque of the motor mounted on the platform to improve the trajectory tracking performance of the platform. The four-wheel independent drive platform developed for this study verified the algorithm. The wheel slip detection and the compensation control algorithm of the platform are expected to improve the stability of trajectory tracking.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.250-256
• /
• 2010

본 연구에서는 차량-교량간의 상호작용 효과가 교량의 동적거동에 미치는 영향을 분석하기 위하여 실험적 연구를 수행하였다. 이를 위하여 차량-교량 간 상호작용이 가능하도록 윤하중 실험 장치를 개발하여 단순교량 형식의 교량을 대상으로 이동 질량 실험을 수행하였다. 이동질량 이론을 이용한 해석 결과와 이동질량 실험의 결과를 상호분석하여 각각의 합리성을 검증하였다. 수행된 실험의 결과를 분석하여 개발된 윤하중 시험기는 차량-교량 간 상호작용에 의한 교량의 동적 거동을 재현할 수 있음을 알았다. 아울러 이동질량 실험의 결과를 분석하여 차량-교량 간 상호작용이 교량의 동적거동에 미치는 영향을 분석할 수 있었다.

• 로봇학회논문지
• /
• 제13권4호
• /
• pp.256-264
• /
• 2018

Unlike normal wheels, the Mecanum wheel enables omni-directional movement regardless of the orientation of a mobile robot. In this paper, a robust trajectory tracking control method is developed based on the dynamic model of the Mecanum wheel mobile robot in order that the mobile robot can move along the given path in the environment with disturbance. The method is designed using the impedance control to make the mobile robot to track the path, and the integral sliding mode control for robustness to disturbance. The good performance of the proposed method is verified using the MATLAB /Simulink simulation and also through the experiment on an actual Mecanum wheel mobile robot. In both the simulation and the experimentation, we make the mobile robot move along a reference trajectory while maintaining the robot's orientation at a constant angle to see the characteristics of the Mecanum wheel.

• 폴리머
• /
• 제31권6호
• /
• pp.538-542
• /
• 2007

도로포장용 아스팔트의 성능을 개선하기 위하여 유화중합법으로 여러 가지 조성의 반응성 고분자 개질제들을 합성하여 아스팔트와 혼합 후 성능을 시험 분석하였다. 합성된 고분자 개질제들을 아스팔트와 혼합 후 시차주사열량계(DSC)로 아스팔트의 열적 특성 변화를 측정하였고, 형광현미경으로 개질제들의 아스팔트에 대한 분산 상태를 확인하였다. 또한 각각의 개질제들을 아스팔트에 대하여 2% 혼합하여 침입도를 측정하였으며, 개질 아스팔트의 동적 안정도와 영구 변형 속도를 측정하기 위하여 개질제 각각을 아스팔트에 대하여 1%씩 혼합하여 wheel tracking 실험을 수행하였고, 그 중 가장 성능이 좋은 개질제 6번을 1.0, 1.5, 2.0% 혼합 후 wheel tracking 실험을 실시하였다. 이러한 침입도와 wheel tracking 실험에서 6번 개질제가 가장 좋은 성능을 나타내었으며, 이는 개질제의 MMA 부분이 styrene 부분보다 개질제의 성능 향상에 더 많은 기여를 하는 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.