• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.457-463
• /
• 2013

To determine the impact of artificial tears which include carboxymethyl cellulose on a hydrogel contact lenses. Methods: A contact lenses made of the cross-linking agent, EGDMA (ethylene glycol dimethacrylate) and HEMA (2-hydroxyethyl methacrylate) and with added NVP (n-vinyl-2-pyrrolidone) and MMA (methyl methacrylate) was evaluated for water content, refractive index, spectral transmittance and contact angle of produced contact lens. Results: The physical properties of the sampled copolymerized polymers showed that water content, refractive index, visible ray transmittance and contact angle were in the range of 26.61%~48.58%, 1.422~1.455, 80.8%~91.4% and $33.93^{\circ}{\sim}65.70^{\circ}$, respectively. In addition, after soaking with artificial tears, the water content, refractive index and contact angle were in the range of 24.46%~48.25%, 1.422~1.457, 77.0%~91.0% and $37.25^{\circ}{\sim}77.33^{\circ}$, respectively. The changes of the physical property depending on hydration time and showed an increase of refractive index and contact angle, decrease of water content and visible ray transmittance. Conclusions: Artificial tears which include carboxymethyl cellulose sodium which is used as a wetting agent influenced water content, refractive index, contact angle and spectral transmittance of a hydrogel contact lenses.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.166-179
• /
• 2022

A test piece was produced using deteriorated pine tree for the conservation treatment of woodblocks cultural heritage, and weight change, color change and penetration diffusion characteristics of the test piece according to the application of Dammar, Wax, Paraloid B-72, Animal glue and H.P.C treatment agent. As a result, it was confirmed that Dammar is the most suitable treatment agent for the strengthening of the material while maintaining the original color of the wood. A test piece was produced using deteriorated porous natural wood, which the damage condition is similar to that of woodblocks cultural heritage and the main tree of woodblocks cultural heritage based on above result, and the application of each Dammar concentration (2%, 5%) and wetting of each Dammar concentration (10%, 15%) were conducted in order to find out the application concentration and treatment method of Dammar, and weight change, penetration diffusion characteristics, etc. were observed. As a result, it was found that the Dammar 2% application was the best as an effective method for the strengthening of the material while maintaining the original color of the wood. Therefore, it is judged that Dammar 2% application is most suitable for the strengthening treatment of woodblocks cultural heritage with severe insect damage and degradation.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Clean Technology
• /
• v.19 no.3
• /
• pp.219-225
• /
• 2013

Environment-friendly and surfactant-free aqueous cleaning agents have been developed in order to solve various problems generated by surfactants in the aqueous cleaning agents. Aqueous surfactant-free cleaning agents, S-1 and S-2 have been formulated with water-soluble solvents such as propylene glycol and propylene glycol ether on their main components and with some additives. These solvents were chosen because of their good solubility in water and excellent solubility of fluxes which are major contaminants of printed circuit board in the electronic industry. Physical properties of the formulated and the imported cleaning agents were measured to predict their cleaning performance, and their cleaning abilities of flux and solder contaminants were evaluated under the various ultrasonic frequencies by a gravimetric method. The measurement results show that the physical properties of cleaning agent V are generally similar with those of formulated cleaning agents S-1 and S-2. Both the cleaning agent V and the formulated cleaning agents S-1 and S-2 showed similar trends that their pH decrease in the beginning and then increases later on with the increase of their dilution in water. It is considered that the wetting indices of the cleaning agents calculated with experimental values do not not have any influence on their cleaning ability. In ultrasonic cleaning tests under three ultrasonic frequencies of 28, 45, and 100 kHz, their best performances of cleaning solder and flux were obtained at 45 kHz and 28 kHz, respectively, and the cleaning performance of the formulated cleaning agents S-1 and S-2 was better than that of the cleaning agent V. However, in the case of the recommended diluted concentration of 25 wt% cleaning solution, the cleaning performance of the cleaner V for solder and flux was better in the initial stage of cleaning compared to the formulated cleaners. And it may be concluded that the formulated cleaning agents S-1 and S-2 can be applied to cleaning of solder and flux in the industry, based on the experimental results in this study.

• Korean journal of applied entomology
• /
• v.16 no.1 s.30
• /
• pp.47-53
• /
• 1977

Bacterial diseases of soybean has been recognized as a limiting factor of soybean production in Korea as it was estimated to cause around 10 percent of yield losses annually. The purpose of the study is to obtain information on the diseases through proving the kinds of pathogens and epidemiology, The wire brush method and multineedle appeared to be the best way of inoculation under all circumstances. Wire brush method, especially, was effective in shortening the incubation period and manifesting the lesion development by introducing more inoculum per unit of area. In case of spray inoculation it was necessary to apply a small amount(1 : 1,000) of wetting agent, twin-20, otherwise it was unabled to produce the diseases under field conditions. Two kinds of bacterial diseases caused by Pseudomonas glycinea and Xanthomonas phaseoli var. sljense were found from surveyed areas in Kore. Wild fire disease on soybean caused by Pseudomonas tabaci had not detectable during the experiment although there were several reports on the disease from other countries. when the pathogens were introduced into sterile soil, bacterial leaf blight pathogen could exsisted until 30 days while bacterial pustule pathogen survived only 4 days under the natural conditions of later June. Both bacteria, however, could produce the disease after more than 10 months period of storage in refrigerator when they were exsisted in infected plant tissues. In warehouse, non-temperature controlled, the bacteria lose their infectability within 6 months period from October to April even though they exsisted in infected tissues. Surface infested seeds with the pathogens could not produced the diseases on seedling stages of soybean plants when the seeds were planted in sterile soil after inoculation by dipping the seeds into bacterial suspensions, although germination was depressed by the pathogens when the seeds were planted on agar media.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1700-1703
• /
• 2007

Microorganisms capable of degrading crude oil were isolated and grown in soybean oil as a sole carbon source. The microbial cultures were used to control green peach aphids in vitro. Approximately 60% mortality of aphids was observed when the cultures were applied alone onto aphids. To examine the cultures as a pesticide formulation mixture, the cultures were combined with a low dose of the insecticide imidacloprid (one-fourth dose of recommended field-application rate) and applied onto aphids. The cultures enhanced significantly the insecticidal effectiveness of imidacloprid, which was higher than imidacloprid alone applied at the low dose. The isolated microorganisms exhibited high emulsifying index values and decreased surface tension values after being grown in soybean oil media. GC/MS analyses showed that microorganisms degraded soybean oil to fatty acids. The cultures were suggested to play the roles of wetting, spreading, and sticking agents to improve the effectiveness of imidacloprid. This is the first report on the control of aphids by using oil-degrading microbial cultures.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.172-179
• /
• 2020

The impact of effective parameters on the electrodeposition rate optimization of Au-Cu alloy at high thicknesses on the silver substrate was investigated in the present study. After ensuring the formation of gold alloy deposits with the desired and standard percentage of gold with the cartage of 18K and other standard karats that should be observed in the manufacturing of the gold and jewelry artifacts, comparing the rate of gold-copper deposition by direct and pulsed current was done. The rate of deposition with pulse current was significantly higher than direct current. In this process, the duty cycle parameter was effectively optimized by the "one factor at a time" method to achieve maximum deposition rate. Particular parameters in this work were direct and pulse current densities, bath temperature, concentration of gold and cyanide ions in electrolyte, pH, agitation and wetting agent additive. Scanning electron microscopy (SEM) and surface chemical analysis system (EDS) were used to study the effect of deposition on the cross-sections of the formed layers. The results revealed that the Au-Cu alloy layer formed with concentrations of 6gr·L^-1 Au, 55gr·L^-1 Cu, 24 gr·L^-1 KCN and 1 ml·L^-1 Lauryl dimethyl amine oxide (LDAO) in the 0.6 mA·cm^-2 average current density and 30% duty cycle, had 0.841 ㎛·min^-1 Which was the highest deposition rate. The use of electrodeposition of pure and alloy gold thick layers as a production method can reduce the use of gold metal in the production of hallow gold artifacts, create sophisticated and unique models, and diversify production by maintaining standard karats, hardness, thickness and mechanical strength. This will not only make the process economical, it will also provide significant added value to the gold artifacts. By pulsating of currents and increasing the duty cycle means reducing the pulse off-time, and if the pulse off-time becomes too short, the electric double layer would not have sufficient growth time, and its thickness decreases. These results show the effect of pulsed current on increasing the electrodeposition rate of Au-Cu alloy confirming the previous studies on the effect of pulsed current on increasing the deposition rate of Au-Cu alloy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.654-663
• /
• 2004

Statement of problem. According to the fracture pattern in several reports, fractures most frequently occur in the interface between the ceromer and the substructure. Purpose. The aim of this in vitro study was to compare the macro shear bond strength and microshear bond strength of a ceromer bonded to a fiber reinforced composite (FRC) as well as metal alloys. Material and methods. Ten of the following substructures, type II gold alloy, Co-Cr alloy, Ni-Cr alloy, and FRC (Vectris) substructures with a 12 mm in diameter, were imbedded in acrylic resin and ground with 400, and 1, 000-grit sandpaper. The metal primer and wetting agent were applied to the sandblasted bonding area of the metal specimens and the FRC specimens, respectively. The ceromer was placed onto a 6 mm diameter and 3 mm height mold in the macro-shear test and 1 mm diameter and 2 mm height mold in the micro-shear test, and then polymerized. The macro- and micro-shear bond strength were measured using a universal testing machine and a micro-shear tester, respectively. The macro- and micro-shear strength were analyzed with ANOVA and a post-hoc Scheffe adjustment ($\alpha$ = .05). The fracture surfaces of the crowns were then examined by scanning electron microscopy to determine the mode of failure. Chi-square test was used to identify the differences in the failure mode. Results. The macro-shear strength and the micro-shear strength differed significantly with the types of substructure (P<.001). Although the ceromer/FRC group showed the highest macroand micro-shear strength, the micro-shear strength was not significantly different from that of the base metal alloy groups. The base metal alloy substructure groups showed the lowest mean macro-shear strength. However, the gold alloy substructure group exhibited the least micro-shear strength. The micro-shear strength was higher than the macro-shear strength excluding the gold alloy substructure group. Adhesive failure was most frequent type of fracture in the ceromer specimens bonded to the gold alloys. Cohesive failure at the ceromer layer was more common in the base metals and FRC substructures. Conclusion. The Vectris substructure had higher shear strength than the other substructures. Although the shear strength of the ceromer bonded to the base metals was lower than that of the gold alloy, the micro-shear strength of the base metals were superior to that of the gold alloy.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.787-798
• /
• 2017

This is a study on characteristics according to the material of sheet-type mask packs being sold on the market. The absorption capacities of water soluble components such as purified water, 1.3-propanediol, 1.3-butylene glycol, glycerine, and hyaluronic acid are compared with that of various oils including cyclomethicone, dimethicone, phytosqualane, caprylic capryl triglyceride, grape seed oil, and macadamia nut oil. As a result, all of the water soluble components except purified water showed higher moisture absorption capacity as the viscosity increased. And in case of oil, all oil showed higher oil absorption capacity according to the viscosity. During this test, the mask sheets with the type of acetic acid fermented bio-cellulose showed 500~1,000 times or more absorption capacity on water soluble wetting agent or all oils, which is due to the fine mesh structure seen in the 5,000x enlarged photograph at surface structure. This mesh structure was well recognized on the cross section and these structural features enhance the absorption capacity of water and oil. It is also believed that largely contained water-soluble components and oils facilitate the discharge over time. In addition, since each mask sheet shows their characteristics according to their material, it is intended to be a basic research for manufacturing mask packs good for skin.