• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.4
• /
• pp.217-223
• /
• 2013

This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.517-522
• /
• 1994

Three experiments were carried out to evaluate the fermentation process and subsequent nutritional quality of silage made from dried and fresh barley straw with and without the addition of wet brewers' grains. The treatments were: 1 kg of dried straw with 600 g of water but no wet brewers' grains (I - 0) as a control, and the same straw mixed with 2 kg (I - 2), 3 kg (I - 3), 4 kg (I - 4), or 5 kg (I - 5) of wet brewers' grains as treatments in Experiment I; and 2 kg of fresh straw without wet brewers' grains (II - 0) as a control, and the same fresh straw mixed with 2 kg (II - 1), 4 kg (II - 2), 6 kg (II - 3), or 8 kg (II - 4) of wet brewers' grains as treatments in Experiment II. Each material prepared was ensiled in 5 L (vinyl) bag silos, and the silos placed in a chamber of $21^{\circ}C$ for 10 (Exp. I) or 7 (Exp. II) months. The fermentation quality and nutritive value of the barley straw silages produced were markedly improved by mixing them with wet brewers' grains. Increasing levels of wet brewers' grains caused on increase in fermentation quality. The in vitro dry matter digestibility of silages was also increased by adding wet brewers' grains. Two semi scale pilot silages, experiment III, prepared from dried and fresh barley straw mixed with wet brewers' grains were fed to wether sheep. These silages, which contained 50% barley straw and 50% wet brewers' grains by dry weight, were moderate apparent digestibility and supplied of about 50% TDN and DCP.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.65-80
• /
• 1996

Ink trap is one of the important factors to determine the color in multi-color overprints. This study was carried out for the purpose for analyzing the relationships between ink traps and color differences in two-color solid overprints. The specimens were printed under four different conditions that the overprinting ink sequence of M(Magenta) or C(Cyan) and the overprinting method of W(Wet-on-Wet) or D(Wet-on-Dry) were changed altermately, that is M+C-W or C+M-W and M+C-D or C+M-D.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.755-762
• /
• 1990

The tungsten paste was printed on the surface of 92% alumina sheet which was made by type casting process. The printed tungsten was bonded on the Al2O3 by co-firing in reducing atmosphere. During the co-firing, the binder burn-out was easier in wet H2 atmosphere than in dry H2, which affected sintered density. In practically, the use of wet H2 above 100$0^{\circ}C$ was beneficial for density of alumina and bond strength. This phenomena occured more distinctly when atmosphere varied from dry H2 to wet H2 than varied dew point in wet H2. In wet H2, the improvement in bonding strength can be attributed to good glass migration into the metal layer due to inhibition of the tungsten particle growth, with increase of alumina density, at the temperatrue higher than 100$0^{\circ}C$.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.665-670
• /
• 2001

The purpose of this study is to develop a new type dryer, which is to proceed mixing and drying of wet-materials at the same time and drying process is carried out in a closed system. In this drying system, thermal contact occurs, when a fluidized zone is created by paddle mechanism. Accordingly, wet-materials is dried in a short time without any damage. Also wet-materials could be dried uniformly to low moisture contents. It is suitable to dry a small quantity of multi-kind materials. And drying process is carried out in a closed system, so as for environmental pollution dust not to be emitted into the atmosphere. Accordingly, it could be used to dry not only food and chemical materials, but also environmental pollution materials.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.360-369
• /
• 2016

In this study, sequential leaching and wet torrefaction were performed to improve the fuel characteristics of empty fruit bunch (EFB). Leaching was carried out at $25{\sim}90^{\circ}C$ for 5~30 min. The highest ash removal efficiency of 55.99% was achieved when leaching was performed at $90^{\circ}C$ for 10 min. The ash removal efficiency was dependent more on leaching temperature than time. Wet torrefaction was carried out at $180{\sim}200^{\circ}C$ for 5~40 min, following the leaching. Most of the inorganic compounds were removed at removal efficiencies of 41.05~63.58% during sequential leaching and wet torrefaction, while silica remained in the biomass. Chloride, calcium, magnesium, and phosphorus showed more than 80% removal efficiencies. The calorific value of EFB increased to 7.96% (4730 kcal/kg) in comparison to the raw material (4390 kcal/kg) when wet torrefaction was performed at $200^{\circ}C$ for 40 min following leaching.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.3
• /
• pp.46-58
• /
• 1984

This study was carried out to investigate the compressive strength and the other effects varying to seasons and curing days on the wet curing conditions of the plain concrete. The results obtained are summarized as follows; 1. The longer the wet curing days and the higher the temperature, the greater the compressive strength was expected. 2.。$_2$8, compressive strength of concrete at 28 days under the dry curing conditions showed a range in 64-76% of that under the wet curing conditions. 3. The seasonal variations in the compressive strength under the wet curing showed in order of summer>spring=autumn>winter, and that under the dry curing were in order of spring ≒autumn> summer> winter. 4. In order to obtain 90% of the design compressive strength, 7 days in spring or autumn and 2 weeks of the wet curing in summer were required. 5. The compressive strength of concrete under the wet curing by using wet straw bag cover was almost the same as that of water curing method. 6. Under the wet curing conditions, the higher the temperature, the greater the effect of the curing of concrete was obtained, however, the compressive strength of concrete was decreased under relatively higher (over 15$^{\circ}$ C) and lower temperature (below 4$^{\circ}$C). 7. Freezing damage was occured when temperature was below 0$^{\circ}$ C and humidity was relatively high. 8. A considerable differnce between estimation of $^{\circ}$$_2$8 from $^{\circ}$7 and measured one was appeared in case of the dry curing conditions. Oregon formula was appeared to be acceptable under the wet curing conditions. 9. In relationship between $^{\circ}$$_2$8 and $^{\circ}$7~, $^{\circ}$28=1. 52 $^{\circ}$7 under the wet curing conditions except winter season, and $^{\circ}$$_2$8 =(1.39-1, 48)$^{\circ}$7 under the dry curing conditions were shown.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.176-183
• /
• 2020

A ship has three types of diving systems (Diver Stage Diving, Wet Bell Diving and Scuba Diving) to carry out a search-and-rescue operation. To reduce the possibility of decompression sickness, any diving systems shall comply with the decompression procedure according to the decompression table corresponding to the diving depth and diving time. The decompression procedure is largely divided into two methods: underwater decompression and underwater-onboard decompression. In particular, the surface interval shall not exceed 5 minutes, which is the phase from underwater decompression to underwater-onboard decompression, in accordance with the U.S Navy Diving Manual. However, the surface interval is greater than 5 minutes as a result of using Wet Bell Diving. This paper describes the result of cause analysis and measurement with improved Wet Bell Diving. Using improved Wet Bell Diving reduced the surface interval to less than 5 minutes. The result of the research can be used for operation and improving the performance of diving systems.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.372-377
• /
• 2019

Leaching ($60^{\circ}C$, 5 min) and wet torrefaction ($200^{\circ}C$, 5 min) of empty fruit bunch (EFB) were carried out to improve the fuel properties; each liquid fraction was reused for leaching and wet torrefaction, respectively. In the leaching process, potassium was effectively removed because the leaching solution contained 707.5 ppm potassium. Inorganic compounds were accumulated in the leaching solution by increasing the reuse cycle of leaching solution. The major component of the leached biomass did not differ significantly from the raw material (p-value < 0.05). Inorganic compounds in the biomass were more effectively removed by sequential leaching and wet torrefaction (61.1%) than by only the leaching process (50.1%) at the beginning of the liquid fraction reuse. In the sequential leaching and wet torrefaction, the main hydrolysate component was xylose (2.36~4.17 g/L). This implied that hemicellulose was degraded during wet torrefaction. As in the leaching process, potassium was effectively removed and the concentration was accumulated by increasing the reuse cycle of wet torrefaction hydrolysates. There was no significant change in the chemical composition of wet torrefied biomass, which implied that fuel properties of biomass were constantly maintained by the reuse (four times) of the liquid fraction generated from leaching and wet torrefaction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.624-628
• /
• 2008

Two-dimensional flow analysis is a way to provide good estimates for complex flow features in flow around islands and obstructions, flow at confluence and flow in braided channel. One of difficult problems to develop a two-dimensional hydraulic model is to analyze dry and wet area in river channel. Dry/wet problem can be encountered in river and coastal engineering problems, such as flood propagation, dam break analysis, tidal processes and so on. The objective of this study is to develop an accurate and robust two-dimensional finite element method with dry/wet technique in complex natural rivers. The dry/wet technique with Deforming Grid Method was developed in this study. The Deforming Grid Method was used to construct new mesh by eliminating of dry nodes and elements. The eliminated nodes and elements were decided by considering of the rising/descending velocity of water surface elevation. Several numerical simulations were carried out to examine the performance of the Deforming Grid Method for the purpose of validation and verification of the model in rectangular and trapezoidal channel with partly dry side. The application results of the model were displayed reasonable flow distribution.