• 제목/요약/키워드: wet processing

검색결과 283건 처리시간 0.022초

클린라이스 제조방식에 따른 백미의 품질 특성 (Quality characteristics of clean rice with the processing system)

  • 김의웅;김훈;이효재;안재환
    • 한국식품저장유통학회지
    • /
    • 제23권4호
    • /
    • pp.522-529
    • /
    • 2016
  • 클린라이스의 제조방식에 따른 품질 특성을 제시 및 비교하기 위하여 건식, 반건식, 가수정미방식으로 각각 제조하여 품질 특성에 대해 연구하였다. 건식 제조방식에서 도정도를 변화시키며 백도에 따른 CBB index, 탁도, 건고물량의 변화를 고찰하였다. 건식 방식에서 백도가 증가할수록 호분층이 완전히 제거되어 CBB index와 탁도는 감소하였고 우수한 클린라이스 품질을 나타내었으나, 높은 백도는 과도한 중량 감소로 수율이 낮아지게 되므로 백도 42 이하로 도정할 필요가 있다. 건식, 반건식, 가수정미방식의 품질을 비교하기 위해 건식, 반건식에서는 백도 39, 40, 41, 42 수준으로 가공하였고, 가수정미방식은 건식에서 제조된 시료를 사용하여 수세 및 건조하였으며, 백도에 따른 품질 특성을 측정하였다. 도정이 진행될수록 곡물온도가 상승하고, 강도가 저하하여 싸라기 발생량이 증가하는데, 도정, 수세와 건조의 여러 과정을 거치는 가수정미방식이 싸라기 발생량이 가장 높게 나타났으며, 반건식이 가장 낮게 나타났다. 국내 탁도 품질기준안 16.0 NTU를 클린라이스의 기준으로 하였으며, 건식과 반건식에서는 백도 42에서 만족하였으며, 가수정미방식에서는 39~42 범위의 모든 백도에서 만족하였다. 백도 16.0 NTU를 만족하는 각 제조방식의 백도에서 완전미수율을 비교하였을 때, 백도 40의 가수정미방식에서 완전미수율은 백도 42의 건식 방식보다 1.4% 높게 나타났으며, 백도 39의 가수정미방식에서 완전미수율은 백도 42의 건식 방식보다 3.0% 높게 나타났다. 그러나 가수정미방식은 저장성이 떨어지기 때문에 높은 저장성이 요구될 경우 반건식 방식이 유리하며, 백도 39~42에서 건식보다 평균 2.2% 높은 완전미수율을 나타냈다.

Improvement of Fermentation and Nutritive Quality of Straw-grass Silage by Inclusion of Wet Hulless-barley Distillers' Grains in Tibet

  • Yuan, Xianjun;Yu, Chengqun;Shimojo, M.;Shao, Tao
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권4호
    • /
    • pp.479-485
    • /
    • 2012
  • In order to develop methods that would enlarge the feed resources in Tibet, mixtures of hulless-barley straw and tall fescue were ensiled with four levels (0, 10%, 20%, and 30% of fresh weight) of wet hulless-barley distillers' grains (WHDG). The silos were opened after 7, 14 or 30 d of ensiling, and the fermentation characteristics and nutritive quality of the silages were analyzed. WHDG addition significantly improved fermentation quality, as indicated by the faster decline of pH, rapid accumulation of lactic acid (LA) (p<0.05), and lower butyric acid content and ammonia-N/total N (p<0.05) as compared with the control. These results indicated that WHDG additions not only effectively inhibited the activity of aerobic bacteria, but also resulted in faster and greatly enhanced LA production and pH value decline, which restricted activity of undesirable bacteria, resulting in more residual water soluble carbohydrates (WSC) in the silages. The protein content of WHDG-containing silages were significantly higher (p<0.05) higher than that of the control. In conclusion, the addition of WHDG increased the fermentation and nutritive quality of straw-grass silage, and this effect was more marked when the inclusion rate of WHDG was greater than 20%.

Detection of the Carcinogenic Liver Fluke Opisthorchis viverrini Using a Mini Parasep SF Faecal Parasite Concentrator

  • Kaewpitoon, Soraya J;Rujirakul, Ratana;Tongtawee, Taweesak;Matrakul, Likit;Panpimanmas, Sukij;Wakkuwattapong, Parichart;Loyd, Ryan A;Kaewpitoon, Natthawut
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권1호
    • /
    • pp.373-376
    • /
    • 2016
  • The Mini Parasep SF fecal parasite concentrator (MPSFC) is a new modification of the closed concentration system, which can easily be adopted in any routine clinical pathology laboratory. Here we describe our experience with the system in diagnosing Opisthorchis viverrini. A total of 199 fecal samples was submitted for routine examination in the clinical pathology laboratory of Suranaree University of Technology hospital, Nakhon Ratchasima province, Thailand, during August to October 2015. Out of all samples examined, 10 (5.03%) were positive with intestinal parasites including O. viverrini (2.01%), followed by Strongyloided stercoralis (1.51%), Hookworm (0.5%), Taenia spp. (0.5%), and Entamoeba coli (0.5%). Regarding the distribution of intestinal parasites in relation to the methods used, and found that 4 samples (2.01%) were positive using the direct wet smear method while 10 (5.03%) were positive with the Mini Parasep SF method; the difference was statistically significant ($X^2$-test = 116.506, p-value =0.001). Mean time for processing using the Parasep system was 6.03 min/sample, the conventional direct wet smear method at 0.3 min/sample. Cost per test, conventional direct wet smear method costing less than the Parasep method at USD 0.74/sample versus USD 1.47/sample. This first report of O. viverrini detection using MPSFC indicates that Parasep concentration test is useful in the routine laboratory, increasing the yield of parasites as compared to direct microscopy, but with greater processing time and cost. Further comparisons between the Parasep concentration test and common methods for O. viverrini detection are required, particularly concerning use in epidemiological surveys.

패키지 기판 디스미어 공정의 대기압 플라즈마 처리 특성 (Process Characteristics of Atmospheric Pressure Plasma for Package Substrate Desmear Process)

  • 유선중
    • 한국진공학회지
    • /
    • 제18권5호
    • /
    • pp.337-345
    • /
    • 2009
  • 패키지 기판의 지름 $100{\mu}m$ 이하 미세 드릴 구멍의 경우 습식 디스미어 공정만으로는 구멍 내부의 스미어를 효과적으로 제거할 수 없다. 본 연구에서는 습식 디스미어 공정의 이전 단계에서 대기압 플라즈마를 처리하여 소수성의 기판 표면을 친수성으로 개질하고자 하였다. 대기압 플라즈마 공정은 리모트 DBD 방식의 전극을 이용하여 패키지 제조 공정에 적합한 인라인 형태의 장비로 구성되었다. 대기압 플라즈마를 처리한 결과 접촉각 기준으로 $71^{\circ}$의 소수성 절연 필름 표면이 $30^{\circ}$ 정도의 친수성 표면으로 개질되었다. 대기압 플라즈마 처리 유무에 따른 습식 디스미어 공정의 특성을 평가하기 위하여 절연 필름의 두께, 드릴 구멍 지름, 표면 조도의 변화를 측정하였는데, 대기압 플라즈마 처리 시 기판 전면에서 공정 특성의 균일도가 향상되는 것을 확인하였다. 또한 대기압 플라즈마 처리 유무에 따른 드릴 구멍의 SEM 사진 분석 결과 대기압 플라즈마 처리 시 구멍 내부의 스미어가 효과적으로 제거됨을 실험적으로 확인하였다.

산업용 니켈-카드뮴 폐 이차전지 습식 재활용을 위한 전처리 및 산 침출에 대한 연구 (A Study on Pretreatment and Acid Leaching for Wet Recycling of Waste Industrial Ni-Cd Secondary Battery)

  • 정수훈;김대원;박일정;최중엽;양대훈;최희락
    • 자원리싸이클링
    • /
    • 제26권5호
    • /
    • pp.67-76
    • /
    • 2017
  • 산업용 폐 니켈-카드뮴 전지를 효율적으로 재활용하기 위하여 케이스에서 분리된 양극 및 음극 스크랩을 cut mill로 분쇄하여 분급하였으며, 철 성분 제거를 위하여 습식 자력선별법을 이용하였다. 또한 얻어진 양극 및 음극 분말을 습식법을 이용하기 위하여 다양한 조건에서의 산 침출 실험을 실시하였다. 최적 침출조건으로 2.0 M $H_2SO_4$, 반응온도 $90^{\circ}C$, 15 wt% $H_2O_2$, L/S=20의 조건에서 3시간 침출을 하여 유가금속인 니켈 및 카드뮴의 침출율을 99% 이상 얻을 수 있었다.

Accuracy Comparison of GPT and SBAS Troposphere Models for GNSS Data Processing

  • Park, Kwan-Dong;Lee, Hae-Chang;Kim, Mi-So;Kim, Yeong-Guk;Seo, Seung Woo;Park, Junpyo
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제7권3호
    • /
    • pp.183-188
    • /
    • 2018
  • The Global Navigation Satellite System (GNSS) signal gets delayed as it goes through the troposphere before reaching the GNSS antenna. Various tropospheric models are being used to correct the tropospheric delay. In this study, we compared effectiveness of two popular troposphere correction models: Global Pressure and Temperature (GPT) and Satellite-Based Augmentation System (SBAS). One-year data from a particular site was chosen as the test case. Tropospheric delays were computed using the GPT and SBAS models and compared with the International GNSS Service tropospheric product. The bias of SBAS model computations was 3.4 cm, which is four times lower than that of the GPT model. The cause of higher biases observed in the GPT model is the fact that one cannot get wet delays from the model. If SBAS-based wet delays are added to the hydrostatic delays computed using the GPT model, then the accuracy is similar to that of the full SBAS model. From this study, one can conclude that it is better to use the SBAS model than to use the GPT model in the standard code-pseudorange data processing.

Effects of Spinning Conditions on Properties of Polyester Yarn Prepared using an Ultra-high-speed Melt Spinning Technique Equipped with a Steam Chamber

  • Ho, Yo-Seung;Kim, Hak-Yong;Jin, Fan-Long;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권11호
    • /
    • pp.3252-3258
    • /
    • 2010
  • In this study, the effects of the various parameters of spinning and drawing processes on the properties of polyester full drawn yarn (FDY) prepared by steam processing during high-speed spinning were investigated using several techniques. The wet shrinkage ratio of the FDY was able to be manipulated by controlling the temperature and draw ratio. The FDY made using the steam high speed spinning technique exhibited identical properties (such as tenacity, elongation, and wet shrinkage ratio) to that of regular FDY, made using the spin-draw process. FDY prepared using the steam process during high-speed spinning showed excellent dyeability. The dye pick-up of the polyester yarn spun at high-speed spinning was found to be improved when dyed under an atmospheric pressure of $100^{\circ}C$. This result was the same as regular FDY dyed under a high pressure of $130^{\circ}C$.

불규칙 파랑 중 직접 예인하는 케이슨의 상판침수에 대한 시간 영역 해석 (Time Domain Analysis on Deck Wetness of a Caisson Wet-towed in Irregular Waves)

  • 허재경;박창욱
    • 한국해안·해양공학회논문집
    • /
    • 제28권1호
    • /
    • pp.27-33
    • /
    • 2016
  • 불규칙 파랑 중에서 직접 예인하는 케이슨의 상판침수에 대한 수치해석을 수행하였다. 패널법을 이용하여 주파수 영역에서의 선형 운동해석을 수행하였고, 통계적 방법을 통해 상판침수를 예측하였다. 시간영역 해석에서는 예인시스템, 환경하중 등을 상세히 구현하여 운동해석을 수행하였고, 상판침수 결과를 주파수 영역에서의 결과와 비교하였다. 또한, 시간 영역 해석에서는 예인선의 수 및 배치에 대한 검토를 수행하여 상판침수 측면에서 예인시스템이 미치는 영향과 운송조건을 고찰하였다.

Ammonium Hexafluorotitanate 전구체로부터 습식 공정을 이용한 불소 함유 TiO2 나노 분말 제조 및 광촉매 특성 연구 (Study on preparation and photocatalytic properties of F-containing TiO2 nanopowders using wet-process from Ammonium Hexafluorotitanate)

  • 이덕희;박재량;이찬기;김현모;박경수
    • 한국분말재료학회지
    • /
    • 제25권3호
    • /
    • pp.226-231
    • /
    • 2018
  • F-containing $TiO_2$ nanopowders are synthesized using simple wet processes (precipitation-based and hydrothermal) from ammonium hexafluorotitanate (AHFT, $(NH_4)_2TiF_6$) as a precursor to apply as a photocatalyst for the degradation of rhodamine B (RhB). The surface properties of the prepared samples are evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). The results confirm that the synthesized anatase $TiO_2$ has sphere-like shapes, with numerous small nanoparticles containing fluorine on the surface. The photocatalytic activity of F-containing $TiO_2$ compared with F-free $TiO_2$ is characterized by measuring the degradation of RhB using a xenon lamp. The photocatalytic degradation of F-containing $TiO_2$ exhibits improved photocatalytic activity, based on the positive effects of adsorbed F ions on the surface.