• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.326-329
• /
• 2005

As a flexible method to fabricate sub-micrometer patterns, Focused Ion Beam (FIB) instrument and Self-Assembled Monolayer (SAM) resist are introduced in this work. FIB instrument is known to be a very precise processing machine that is able to fabricate micro-scale structures or patterns, and SAM is known as a good etch resistance resist material. If SAM is applied as a resist in FIB processing fur fabricating nano-scale patterns, there will be much benefit. For instance, low energy ion beam is only needed for machining SAM material selectively, since ultra thin SAM is very sensitive to $Ga^+$ ion beam irradiation. Also, minimized beam spot radius (sub-tens nanometer) can be applied to FIB processing. With the ultimate goal of optimizing nano-scale pattern fabrication process, interaction between SAM coated specimen and $Ga^+$ ion dose during FIB processing was observed. From the experimental results, adequate ion dose for machining SAM material was identified.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.289-299
• /
• 2020

Highly aromatic (HA) oils are common processing aids used in tire tread compounds. However, they often bleed and evaporate from the vulcanizates during tire use. Thus, the mechanical and dynamical properties of the tire decrease. To overcome this problem, we investigated nonfunctionalized liquid butadiene rubber (LBR-305, Kuraray) and center-functionalized liquid butadiene rubber (C-LqBR), polymerized by anionic polymerization. In addition to the liquid butadiene rubbers, p-tert-octylphenol (P-Resin) and C5 hydrocarbon (H-Resin) tackifier resins, which can induce entanglement of rubber compounds, were researched as a processing aid to solve the bleeding problem. Liquid butadiene rubbers have significantly reduced extraction loss by crosslinking with the main rubber chain. They have also increased the abrasion resistance and showed similar or better mechanical and dynamical properties against HA oils. However, resin compounds did not show differences in extraction loss compared to HA oil compounds; instead, they showed increased wet traction.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.26-34
• /
• 2008

본 연구는 도로 관제 목적으로 사용 중인 가시 카메라(Visible Camera)를 사용하여 촬영한 도로표면 영상을 화상 인식 도로표면의 상태를 식별하는 방법과 기준을 제안하였다. 먼저, 입력 화상은 낮 시간대의 아스팔트 포장 도로면을 촬영하여 도로표면 상태의 화상을 만들었고, 편광 및 웨이블릿 변환(Wavelet transform)으로 도로 표면을 5가지의 상태(건조, 습윤, 수막, 적설, 동결)로 인식할 수 있는 분류기준절차를 연구하였다. 표면 화상 인식 과정은 편광계수(수직/수평 편광 비율) 값이 1.3 이상이면 젖은 땅으로 분류한 후, 다음으로 젖은 땅을 제외한 나머지는 웨이블릿 패킷 변환을 통해 시간-주파수 분석을 하였다. 또한 영상 템플릿을 이용하여 마른 땅과 빙판의 표준적인 주파수 특성을 분석하여, 마른 땅과 빙판을 구분하였다. 입력 영상에 대해서 제안한 도로표면상태의 인식분류 및 기준에 따라, 도로표면영상에서 마른 부분과 젖은 부분을 구분한 결과를 정리하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.

• 폴리머
• /
• 제26권1호
• /
• pp.45-52
• /
• 2002

고밀도 폴리에틸렌(HDPE)과 초고분자량 폴리에틸렌(UHMWPE)을 블렌딩한 고분자 구조를 갖는 리튬이온 2차 전지용 습식 separator를 제조하였으며, 그들의 고분자 블렌딩 및 연신 조건이 제반물성에 미치는 영향에 관해서 고찰하였다. Separator의 기계적 강도는 UHMWPE의 분자량 및 함량이 증가함에 따라 크게 향상되었으며, UHMWPE의 함량이 6 wt%이며 5배 연신 필름에서 약 $1000 kg/\textrm{cm}^2$의 기계적 강도를 보이며 제막성 또한 우수한 것으로 나타났다. Separator의 기공구조는 0.1~0.12 $\mu\textrm{m}$로 균일성을 보였으며, shut-down특성은 130 $^{\circ}C$ 부근에서 급격히 상승하여 $160^{\circ}C$에서 용융되는 것으로 나타났고 따라서 리튬이온 2차전지에 적용 가능한 것으로 평가되었다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.14-20
• /
• 2018

Wet clutches in an automatic transmission enable the transmission of the engine power by the frictional torque experienced and noted between disk and plates. Since the clutch frictional torque considerably affects the shift quality of an automatic transmission as well as the durability of the machinery, its friction characteristics must be carefully examined to meet the design requirements. The SAE No. 2 friction test machine is a well-known standard to evaluate mainly the friction characteristics of plate clutches along with the required automatic transmission fluids. This paper reviews the experimental analysis of the wet clutch friction characteristics by using the exclusively developed clutch test machine which is capable of controlling the clutch test procedure, in accordance with the applicable test standard and processing of the experimental data automatically. As the clutch test machine is designed for the accommodation of dual clutches which is applied to the real transmission, it can evaluate not only the clutch friction characteristics, but also an actuation performance of a measured clutch piston. In respect to friction characteristics involving dynamic friction coefficients, the energy absorbed in a clutch disk and the recorded temperatures of clutch plates during braking actions and procedures are also investigated. Additionally, the change of friction coefficients by the use of the repeated clutch application is also observed with the endurance test functions of an accurately calibrated and dedicated clutch test machine.

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.75-81
• /
• 2000

아밀로오스함량, 당함량, 전분입자의 형태 등에 차이를 보이는 8품종 변이체 벼들의 쌀빵가공성에 대한 제분방법(습식 및 건식)의 차이에 대해서 검토하였다. 이들 8품종의 최대수분흡수량은 품종에 따라 상당히 차이가 있어 shr.은 61.5%, 분질미는 48.4%였고, 화청벼 남풍벼 및 그들의 변이체들은 아밀로오스 함량이 낮은 품종의 쌀일수록 최대 수분흡수량은 증가하고 있었다. 건식제분에 의해서 제조한 쌀빵이 성형성, 기계적인 물성(경도, 탄력성, 응집성. 씹힘성) 및 관능검사에 의한 질감의 면에서 습식제분의 경우보다 우수하였다.

• 한국의류학회지
• /
• 제35권1호
• /
• pp.115-124
• /
• 2011

This study provides an eco-friendly dyeing processing for chitosan fiber using Oenothera odorata jacquin as a dye. The effects of chemical mordants (Al, Cu, Fe) and natural mordant (Chestnut shell) on the color change for dyed chitosan fibers were measured by K/S values, L, $a^*$, $b^*$, H, V, C values, color fastness, and antimicrobial activity. The results are as follows. Dyeing conditions of Oenothera odorata jacquin on chitosan fibers were optimized to $70^{\circ}C$, 30 minutes and 200% on weight of fabric (o.w.f.). The pre-mordant concentration of aluminium (Al), copper (Cu) and iron (Fe) of chitosan fibers was optimized to 3% (o.w.f.) and 1% (o.w.f.), respectively. The post-mordant concentration of chemicals, such as Al, Cu and Fe, on chitosan was determined to 1% (o.w.f.). The hue of chitosan fibers by chemical mordants was measured to be reddish & yellow. The pre-mordant concentration of Chestnut shell of chitosan was optimized to 70% (o.w.f.). The post-mordant concentration of Chestnut shell on chitosan was determined to be 50% (o.w.f.). The hue of chitosan fibers by Chestnut shell mordant was measured to be reddish & yellow. The wet cleaning fastness of chitosan fibers was improved by a pre-mordant that used chemical mordants. In the case of the Chestnut shell mordant, the wet cleaning fastness was improved by a post-mordant. The dry cleaning fastness of chitosan fibers was excellent regardless of mordants and mordant methods. The antimicrobial activity of the chitosan fiber was shown at 99.9% and its excellent qualities remained after the dyeing and mordant processing.

• 공업화학
• /
• 제24권2호
• /
• pp.121-125
• /
• 2013

본 연구에서는 고분자 전해질 연료전지용 가스확산층의 지지체로 쓰이는 탄소종이를 탄소 단섬유를 이용하여 습식법으로 제조하였다. 습식법을 통한 탄소종이 제조는 크게 탄소 단섬유의 분산, 탄소종이 웹 제조, 페놀함침의 세 가지과정을 거치게 된다. 이번 연구에서는 몇 가지 분산제의 종류에 따른 탄소 단섬유의 분산도를 확인하고, 최적의 분산제를 찾아 탄소종이 제조 시 탄소섬유가 이차원적 배향이 잘 이루어지게 하였다. 추가적으로 페놀함침 시 첨가되는 페놀과 카본블랙 함량에 따른 전기전도도 특성을 분석하였다. 그 결과 sodium dodecyl sulfate를 분산제로 사용한 경우 탄소섬유의 분산이 가장 잘 되는 것을 확인하였으며, 페놀 및 카본블랙 함량에 따른 전도도 특성은 탄소섬유 대비페놀이 8 wt%, 카본블랙이 5 wt% 첨가된 경우 가장 우수하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.314-315
• /
• 2008

We have studied a property change of organic light-emitting diodes (OLED)s due to a surface reformation of indium-tin-oxide(ITO) substrate. An ITO is widely used as a transparent electrode in light-emitting diodes, and the OLEDs device performance is sensitive to the surface properties of the ITO. The ITO surface reformation could reduce the Schottky barrier at the ITO/organic interface and increase the adhesion of the organic layer onto the electrode. We have studied the characteristics of OLEDs with a treatment by a wet processing of the ITO substrate. The self-assembled monolayer(SAM) was used for wet processing. The characteristics of OLEDs were improved by SAM treatment of an ITO in this work. The OLEDs with a structure of ITO/TPD(50nm)/$Alq_3$(70nm)/LiF(0.5nm)/Al(100nm) were fabricated, and the surface properties of ITO were investigated by using seneral characterization techniques. Self-assembled monolayer introduced at the anode/organic interface gave an improvement in turn-on voltage, luminance and external quantum efficiency compared to the device without the SAM layer. SAM-treatment time of the ITO substrate was made to be 0/10/15/20/25min. The current efficiency of the device with 15min. treated SAM layer was increased by 3 times and the external quantum efficiency by 2.6 times.