• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.26-33
• /
• 2002

Dyeing properties and crosslinking effect of bifunctional reactive dyes on chitosan fiber were investigated to improve the stability of chitosan fiber against the mild acidic solution and the wet processing. Chitosan fibers were crosslinked with epichlorohydrin for comparing purpose, and dyed with C. I. Reactive Red 194, C. I. Reactive Blue 50, and the reactive dye having two $\alpha$-bromoacrylamide groups at various concentrations. The initial dyeing rates of reactive dyes are rapid and chitosan fibers absorb the relatively large amount of dyes. The chitosan fibers dyed with these dyes show the low degree of swelling and the low solubility in 1 % acetic acid solution and also represent the higher thermal stability The reactive dye with two $\alpha$-bromoacrylamide groups shows higher crosslinking effect than other dyes.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.155-164
• /
• 2001

Textile wet-processing industry usually five rise to environmental pollution problems caused by using chemical substance. The objective of this study is to apply enzymes for wool and reduce the environmental problems. Three commercial protein degradation enzymes and a cellulose degradation enzyme as a reference were treated to prevent the shrinkage of wool fabric on laundering. Shrink resistant effects used change with the kinds of enzyme, the amount of enzyme, assistant chemicals, and the pre-treatment condition of wool fabric. When pre-treated with corona before enzyme treatment under ultrasonic condition, the weight loss was increased and strength was decreased and elongation was increased. Both corona pre-treatment and the addition of $Na_2SO_4$ also decreased shrinkage of wool fabrics on laundering. The existence of assistant chemicals increased alkali solubility of wool fabrics.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2005

Study on the use of enzymes for textile wet processing has been very active. The exploratory research conducted herein is related to the bioscouring process for cotton fabric. The optimum concentration of alkaline pectinase(BioPrep) was in the range of 0.05～0.2 g/l, the proper treatment time was 30～60 minutes, the appropriate treatment temperature was $60^{\circ}C$ for both the batch method and the padding method. The simultaneous desizing/bioscouring by padding method did not give water absorbency as good as the bioscouring after desizing. Color of fabrics which were bioscoured and dyed with direct dyes and a reactive dye was just a little darker than that of NaOH scoured one. K/S and Lab values of the bioscoured fabrics, regardless of the degree of water absorbency, were quite similar to each other.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.35-43
• /
• 2004

This study surveys the physical properties of ATY produced with FDY and POY. ATY is made with 70d Nylon FDY and 80d Nylon POY using AIKI air jet texturing machines, respectively. The processing parameters such as air pressure and yam speed are varied, and air pressure is varied ranging with 8.5bar, l0.5bar and 1l.5bar, and yarn speed is varied ranging with 400m/mim, 450m/mim, and 500m/min. The various physical properties of ATY made by POY and FDY denier, wet shrinkage, dry shrinkage, tensile properties, thermal stress and instability are measured and discussed with air pressure and yam speed. The shrinkage simulation of ATY is performed for analysing the process shrinkage on the dyeing and finishing processes.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.1
• /
• pp.3-9
• /
• 1990

Expression is on operation of separating liquid from solid liquid mixtures which has long been used on a universal scale in widely divergent fields. In fruit pulps processing and fermentation industries. removal of a portion of the liquid in filler cake is essential to the maximum yields of products. In sewage sludge treatments, dewatering of filter cakes is important to disposal by incineration. transportation. and landfill. In the chemical process industries, drying of wet cakes increases cost, and it is desirable to eliminate as much liquor as possible by non-thermal methods. This paper is mainly concerned with the development of a simplified equation for constant-pressure expression.

• Journal of Environmental Health Sciences
• /
• v.14 no.2
• /
• pp.13-27
• /
• 1988

Two asbestos slate manufacturing and seven asbestos textile plants in Korea were surveyed from May 20 to July 2, 1987. The purposes of this study were to evaluate 1) worker exposure to asbestos, 2) compliance to the standards and 3) the efficiency of existing local exhaust systems. Sixty-two personal samples and eighty-three area samples were collected and analyzed using "NIOSH 7400" method. Results of this study were as follows. 1. The asbesots exposure concentrations in asbestos textile plants were 1.3 - 14.3 fibers/cc(geometric mean(GM), 4.4 fibers/cc). 2. Worker exposure level to asbestos fiber in asbestos slate manufacturing industry was 0.21 fibers/cc during wet processing, which is below the Korean Standard of 2 fibers/cc. 3. Most local exhaust systems installed in asbestos textile plants were inadequately designed. 4. Ninety-six percent of the 145 samples exceeded the U.S. Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.2 fibers/cc and forty-nine percent of the samples exceeded the Korean Standatd of 2 fibers/cc.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.260-265
• /
• 2015

Spherical fine cobalt powders were fabricated by new liquid reduction method. Commercial cobalt sufate heptahydrate was used as raw material. Also ethylene glycol was used as solvent and hydrazine-sodium hypophosphite mixture was used as reduction agent for the new liquid reduction method. A plate shaped cobalt powders with an approximately 300 nm were prepared by a traditional wet ruduction method using distilled water as solvent and hydrazine. Spherical fine cobalt powders with an average size of $1-3{\mu}m$ were synthesized by a new liquid reduction method in 0.3M cobalt sulfate and 1.5M hydrazine-0.6M sodium hypophosphite mixture at 333K.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.658-667
• /
• 1996

A computer vision system was developed to automatically detect and locate the oyster hinge line, one step in shucking an oyster. The computer vision system consisted of a personal computer, a color frame grabber, a color CCD video camera with a zoom lens, two video monitor, a specially designed fixture to hold the oyster, a lighting system to illuminate the oyster and the system software. The software consisted of a combination of commercially available programs and custom designed programs developed using the Microsoft CTM . Test results showed that the image resolution was the most important variable influencing hinge detection efficiency. Whether or not the trimmed -off-flat-white surface area was dry or wet, the oyster size relative to the image size selected , and the image processing methods used all influenced the hinge locating efficiency. The best computer software and hardware combination used successfully located 97% of the oyster hinge lines tested. This efficienc was achieve using camera field of view of 1.9 by 1.5cm , a 180 by 170 pixel image window, and a dry trimmed -off oyster hinge end surface.

• Laser Solutions
• /
• v.14 no.2
• /
• pp.13-16
• /
• 2011

We fabricated the Fresnel zone plate using femtosecond laser lithography-assisted micro-machining, which is a combined process of nonlinear lithography and wet etching. We investigated the focusing properties by launching a 632.8nm wavelength He-Ne laser beam into the zone plate. The spot size of the primary focal point was $27{\mu}m$ and the intensity of focal point was 0.565W/$cm^2$.