• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.340-340
• /
• 2012

최근 MOS 소자들이 게이트 산화막을 Mono-layer가 아닌 Multi-Layer을 사용하는 추세이다. Bulk와 High-k물질간의 Dangling Bond를 줄이기 위해 Passivation 층을 만드는 것을 예로 들 수 있다. 이러한 Double Layer의 쓰임이 많아지면서 계면에서의 Interface State Density의 영향도 커지게 되면서 이를 측정하는 방법에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 $SiO_2$ Double Layer의 Interface State Density를 Conductance Method를 사용하여 구하는 연구를 진행하였다. Wet Oxidation과 Chemical Vapor Deposition (CVD) 공정을 이용하여 $SiO_2$ Double-layer로 증착한 후 Aluminium을 전극으로 하는 MOS-Cap 구조를 만들었다. 마지막 공정은 $450^{\circ}C$에서 30분 동안 Forming-Gas Annealing (FGA) 공정을 진행하였다. LCR meter를 이용하여 high frequency C-V를 측정한 후 North Carolina State University California Virtual Campus (NCSU CVC) 프로그램을 이용하여 Flatband Voltage를 구한 후에 Conductance Method를 측정하여 Dit를 측정하였다. 본 연구 결과 Double layer (Wet/CVD $SiO_2$)에 대해서 Conductance Method를 방법을 이용하여 Dit를 측정하는 것이 유효하다는 것을 확인 할 수 있었다. 본 실험은 앞으로 많이 쓰이고 측정될 Double layer (Wet/CVD $SiO_2$)에 대한 Interface State Density의 측정과 분석에 대한 방향을 제시하는데 도움이 될 것이라 판단된다.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.49-50
• /
• 1970

A wet oxidation method of oxalic acid standard used in radiocarbon dating is described, and error due to possible carbon isotope fractionation during the oxidation is estimated.

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.509-512
• /
• 2003

Pretreatment method for the determination of total arsenic in seafood sample was studied. NIST SRM 1566a oyster tissue ($14.0{\pm}1.2mg\;As/kg$) as a standard arsenic compound in order to establish the decomposition method. We confirmed that the best way for pretreatment of seafoods to analyze total arsenic content precisely was $HNO_3-H_2SO_4-HCIO_4$ method by comparison of two methods which are dry ashing and wet ashing methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.615-622
• /
• 2012

The aim of shotcrete is to increase the bearing capacity and to protect the excavated surface from erosion by preventing falling of rock mass. Shotcreting method is divided into two types as dry process and wet process. Since 1997, wet process method has been used more frequently than dry process method in field works. The failure to bond, so called rebound, occurs in many case during shotcrete works. The excess amount of rebound has a significant effect on the total construction cost. For example, material and craft-man cost increases, the shooting time delays due to deceleration of work execution stage, work efficiency of craft-man decreases and additional cost to remove the muck generates. In this study, therefore, the experimental analysis of rebound amount and strength was conducted by analyzing the actual construction data for wet process type of shotcreting method upon accelerator contents. Also, the effective and rational method was suggested, which can be actually implemented in the Korea construction sites.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1162-1174
• /
• 2010

Excavated gold brocade, often shows signs of serious damage and contamination from environmental factors such as exposure to soil or human remains. Therefore, most of the conservation procedures are focused on the consolidation of the gold thread and on cleaning with water or organic solvents. Indiscreet cleaning using solvents could damage the gold leaf, which identifies the features of fabric. There is a need to develop cleaning protocols appropriate for relics through the careful analysis of the condition of the relics. This study finds the appropriate cleaning method for the excavated gold brocade. Four different cleaning methods, vacuum cleaning, kneaded rubber eraser cleaning, immersion wet cleaning, and absorption wet cleaning were applied to the excavated gold brocade. The degree of cleaning and damage were examined depending on the cleaning methods, changes to the physical condition (before and after cleaning) were also analyzed through the surface observation. Although immersion cleaning showed the best cleaning result, this method had a risk of damage to the gold thread. Absorption wet cleaning safely eliminated the various soluble contaminants and the rotten smell of relics. Kneaded rubber eraser was suitable for the excavated gold brocade fabric because it can be applied to selective parts, intentionally excluding some sensitive parts such as the gold thread. The vacuum cleaning method required special attention because of a possibility of suctioning off loosely attached gold leaf. Dual cleaning, the kneaded rubber eraser cleaning, followed by the absorption cleaning was the most effective method to preserve and clean excavated gold brocade.

• Tribology and Lubricants
• /
• v.34 no.2
• /
• pp.60-66
• /
• 2018

Graphene is a monolayer of carbon atoms (approximately 0.34 nm), arranged in a honeycomb network. It has been hailed as a next-generation flexible and transparent material because it has high electrical and thermal conductivities, excellent mechanical properties, as well as flexible and transparent properties. The wettability of graphene alters its adhesion or surface energy, and it is therefore an important parameter influencing its application in the fabrication of next-generation flexible and transparent electronics. Studies on the wettability of graphene are numerous and various opinions exist. However, almost all of these studies use the wet transfer method to transfer the graphene. In this study, therefore, we investigated the effect of wet and dry transfer methods on water contact angles of graphene on a substrate. The contact angles of substrates vary depending on the type of substrate. It was found that after graphene is transferred to the substrate, regardless of transfer method, the graphene/substrate contact angle increases to a value. The contact angle of graphene transferred using the dry transfer method is higher than the contact angle of graphene transferred using wet transfer methods. The wet transferred graphene is affected by the poly(methyl methacrylate) (PMMA) residue and the polar surface of substrate. The dry transferred graphene is influenced by the conformal contact between graphene and substrate.

• Food Science of Animal Resources
• /
• v.39 no.4
• /
• pp.655-667
• /
• 2019

The present study aimed at investigating the effects of dry- and wet-aging methods on flavor compounds and sensory properties of low fat Hanwoo beef muscles. All the beef samples were obtained from 2-grade carcasses of Hanwoo cows. The beef samples used in the dry- and wet-aging methods were prepared in the forms of quarter beef (bone-in) and cuts (boneless), respectively. The dry-aging was carried out at $2^{\circ}C-4^{\circ}C$ and humidity of 65%-85%, while the wet-aging was done at $1^{\circ}C$ for 0, 20, 40, and 60 d. At each aging time, three muscles: longissmus thoracis (LT), glutaeusmedus (GM) and semimembranosus (SM) were taken from the corresponding quarters and cuts, and used for the flavor compounds and sensory analyses. Results showed that both aging methods significantly increased the concentrations of flavor compounds and total amount of all classes of the flavor compounds as the aging time increased (p<0.05). In the dry-aging method, the GM and SM muscles presented significantly higher total amounts of pyrazines and sulfur-containing compounds compared to the LT muscle (p<0.05). Both the aging methods improved the eating quality attributes, indicating by increased scores of sensorial attributes with increased aging time for all the muscles studied (p<0.05). However, compared to the wet-aging, the dry-aging method resulted in significantly higher scores of tenderness and flavor for the GM and SM muscles after 40 to 60 d. Thus, postmortem aging, especially the dry-aging method could be used to improve eating quality attributes (tenderness and flavor) of low fat beef muscles such as GM and SM.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.77-84
• /
• 2023

Simulating the cohesion and stiffness of wet hair or fur in physics-based simulations is one of the most challenging problems. Wet hair or fur is characterized by bunching and stiffening at the ends, a phenomenon that can be seen in wet animal fur or hair. In addition, when wet hair interacts with a solid, adhesion occurs, but this problem becomes difficult to solve due to the different distribution and balance of forces in curly hair. In traditional methods, wet hair is represented by hand or by using static hairstyles to represent wet curls and hair. However, how to depict the details of wet curly hair has not been actively researched. In this paper, we propose a new algorithm to efficiently model the curl exaggeration, cohesion, adhesion, and stiffness of wet curly hair. The proposed method efficiently simulates cohesion and integrates stiffness constraints with curl dynamics to reliably control hair elasticity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.827-831
• /
• 2009

Recently, frequency occurring flood and drought has increased the necessity of an effective water resources control and management of river flows. Therefore, the simulation of the flow distribution in natural rivers is great importance to the solution of a wide variety of practical flow problems in water resources engineering. However The serious problem facing two-dimensional hydraulic model is the treatment of wet and dry areas. The objective of this study is to investigate the wet and dry parameters that have direct relevance to model performance in situations where inundation of initially dry areas occurs. Several numerical simulations were carried out, which examined the performance of the marsh porosity method for the purpose of sensitivity analysis. Experimental channel and a variety of channel were performed for model tests. The results were compared with those of the observation data and simulation data of existing model. The RMA-2 model displayed reasonable flow distribution compare to the observation data and simulation data of existing model in dry area for application of natural river flow. As a result of this study, effectively applied marsh porosity method provide a reliable results for flow distribution of wet and dry area, it could be further developed to basis for extending to water quality and sediment transport analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.667-667
• /
• 2013

Optimizing morphology of the front surface with three dimensional structures (3D) in solar cell is essential element for not only effectivelight harvesting but also carrier collection and separation without the cost burden in process. We designed a three-dimensionally ordered front surface with wet chemical etching. Wet chemical etching is a proper way to have three dimensional structures. The method efficiently transmits the incident light at the front surface to a Si absorber and has competitive price in manufacturing when comparing with reactive ion etching (RIE) to have three dimensional structures. This indicates that optimized front surface with three dimensional structures by wet chemical etching will bring effective light management in solar cells.