• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.164-171
• /
• 1999

A new technique for recycling process water was developed in order to reduce the calcium hardness of the closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by a reaction with sodium carbonate and the CaCO$_3$precipitates were easily removed from the system by a dissolved air flotation(DAF) method. After the DAF stage, CO$_2$-gas was purged into the water because the pH of Na$_2$CO$_3$-treated white water was reduced to neutral by CO$_2$gas. Since CaCO$_3$precipitate tends to stick onto the fine fiber surface and then is selectively removed from the water, a proper amount of suspended solid in the process water acts as an important factor in deciding the removal efficiency. By the application of Na$_2$CO$_3$addition - DAF - CO$_2$purging to the short circulated white water the calcium hardness was significantly reduced by 92% and more. The removal of calcium ions with fine fibers led to drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

• 한국식생활문화학회지
• /
• 제27권6호
• /
• pp.751-758
• /
• 2012

This study examined the optimum conditions for producing Jeung-pyun in a faster and efficient way by replacing Takju (traditional way) with a chemical leavening agent for fermentation using dry rice powder instead of wet rice powder. The optimum amount of leavening agent for Jeung-pyun was examined by comparing the moisture content, spring ratio, pore ratio, texture, color value, scanning electron microscopy images and appearance characteristics of Jeung-pyung (con) prepared using traditional fermentation method with those prepared with 4, 5, 6, 7, 8% of the chemical leavening agent. As a result, the 6% leavening agent-added Jeung-pyun showed closest quality results with the traditional Jeung-pyun, and was most preferred. Therefore, 6% leavening agent is the optimum amount for making Jeung-pyun.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.85-91
• /
• 2002

A research on the performance of retrofit anchors was conducted using adhesives for rehabilitation. From the pull-out tests of the chemical anchors, the effect of the hole diameter, spacer, temperature, moisture, embedment depth, and aging time were investigated. The spacer did not directly increased the pull-out load hilt increased post-yielding resistance therefore the ductility of the retrofit anchors. When the hole was cleaned and dried after the immersion, the pull-out load was greatly increased compared to the wet hole. A design equation was unposed depending on the embedment depth of the anchor bolt.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.193-199
• /
• 2013

In this work, thin film type Cu/ZnO nanostructure catalysts were fabricated by several synthetic routes in order to maximize the performance of the micro reforming system. For this work, various Cu/ZnO nanostructure catalysts could be synthesized by means of four approaches which are chemical vapor method, wet solution method and their hybrid method. The reforming performance of these as-synthetic catalysts was evaluated as compared to the conventional catalysts. Among the as-synthetic nanostructures, sphere type catalysts with specific surface of $18.6m^2/g$ showed the best performance of hydrogen production rate of 30ml/min at the feed rate of 0.2ml/min. This work will give the first insight on thin film type Cu/ZnO nanostructure catalyst for micro reforming system for hydrogen production of portable electronic systems.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.779-784
• /
• 2003

Nickel powders were obtained by various preparation methods, and their sintering characteristics were investigated. Nickel powders made by wet chemical process (WCP) had a higher surface area and more narrow size distribution than that of chemical vapor deposition (CVD) method. Nickel-oxide powders by the WCP method were prepared at $200^{\circ}C$ for 3 hr. The oxidation behaviour of nickel-oxide powder is similar with that of the CVD method. Nickel powders made by the WCP method showed a higher shrinkage in the range of $600^{\circ}C$∼$900^{\circ}C$ than that of commercial powder made by the CVD method. The similar results were observed on the surface microstructure of sintered bodies by SEM measurements.

• KSBB Journal
• /
• 제23권6호
• /
• pp.513-518
• /
• 2008

재조합 대장균으로부터 베타-카로틴을 추출/정제하고 정제된 베타-카로틴의 주름개선 성능을 평가하였다. 탈수 용매, 추출 용매에 따른 추출량의 큰 변화는 발견되지 않았으나, wet-cell cake으로부터 추출한 경우가 dry cell로부터 추출한 경우에 비하여 2배 많은 양의 베타-카로틴이 추출되었다. 5 g의 wet-cell cake을 파쇄하고, 아세톤으로 탈수한 후, isobutyl acetate로 추출한 결과 36 mg의 베타-카로틴이 추출되었는데, 이는 61.2% 회수율에 해당한다. 베타-카로틴의 결정을 생성시키고 이를 분리한 결과 순도가 증가하였다. 재조합 대장균 배양액 2.5 L로부터 얻은 wet-cell cake 223 g의 탈수, 세포 파쇄 후 세포 잔사물로부터 베타-카로틴 추출, 농축, 결정화 등을 통하여 최종적으로 순도 93%인 베타-카로틴 결정 633 mg을 얻었다. 사람섬유아세포 배양을 통하여 정제된 베타-카로틴의 세포 독성 및 콜라겐 합성에 미치는 영향을 조사하였다. $1.7{\mu}M$의 베타-카로틴을 첨가 시 세포에 독성을 거의 나타내지 않았으며 콜라겐 합성양은 첨가하지 않은 경우에 비하여 1.4배 증가하였다. 본 결과는 저 유독성 용매를 사용하고 기존보다 간단한 방법을 사용하여 재조합 대장균으로부터 고순도의 베타-카로틴을 정제할 수 있고 이를 기능성 화장품의 주름개선제로 사용될 수 있음을 시사한다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.137-140
• /
• 2006

This paper describes a technique combining chemometrics with UV spectroscopy for the determination of the concentra tions of two tissue additives (i.e., wet strength and softening agents) in a cellulose fiber containing solution. In single as ent solutions, the concentration of the additive can be measured by UV spectroscopy at the wavelength where the species having absorption. For a binary (i.e., containing two additives) solution system, the spectral characterization is very complicated. However, if aided by a chemometrical calibration technique, each additive in the binary solution can be quantified simultaneously. The present method is very rapid and simple, it can easily perform a continuous measurement in the changes in the additives' concentration after fiber addition, and therefore this becomes a valuable tool for the adsorption kinetics study of chemical additives onto the cellulose fibers. The time-dependent adsorption behaviors of the wet-strength, softening agent, and their both on fiber were also presented.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2180-2186
• /
• 2002

In a micro-scale contact, capillary force and van der Waals interaction significantly influence the contact between asperities of rough surfaces. Little is, however, known about the variation of these surface forces as a function of chemical property of the surface (wet angle), relative humidity and deformation of asperities in the real area of contact. A better understanding of these surface forces is of great necessity in order to find a solution for reducing friction and adhesion of micro surfaces. The objective of this study is to investigate the surface forces in micro-scale rough surface contact. We proposed an effective method to analyze capillary and van der Waals forces in micro-scale contact. In this method, Winkler spring model was employed to analyze the contact of rough surfaces that were obtained from atomic force microscopy (AFM) height images. Self-mated contact of DLC(diamond like carbon) coatings was analyzed, as an example, by the proposed model. It was shown that the capillary force was significantly influenced by relative humidity and wet angle of the DLC surface. The deformation of asperities to a critical magnitude by external loading led to a considerable increase of both capillary and van der Waals forces.