• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1067-1076
• /
• 2013

Known as an important criterion that evaluates performance of future high-speed backbone networks, burst data loss ratio is well-studied in Optical Burst Switching networks. Current literatures mostly focus on reduce burst loss ratio without considering the system stability and link utilization after reducing. In this paper, we propose a novel framework which comes from feedback theoretic to dynamically control burst loss ratio in OBS. The proposed scheme tries to track the pre-set values of burst loss ratio and increases the stability and link utilization degree. The simulation results show that measured burst loss ratio always tracks setup reference with small errors, wavelength channel utilization is increased up to 2% and the system stability is also improved.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.206-209
• /
• 2003

AC loss is an important issue in the design of high-T$_{c}$ superconducting power cables which consist of a number of Bi-2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. So special cautions are required in the positioning of voltage leads for measuring the true loss voltage. In this work we have prepared a conductor composed of three Bi-2223 tapes with different critical currents. The ac loss characteristics in the conductor have experimentally investigated. The loss tests indicate that the ac loss is dependent on arrangements of voltage leads but not on their contact positions. The measured losses in the conductor also agree well with the sum of the transport losses measured in each Bi-2223 tape.e.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.7-10
• /
• 2003

AC loss is an important issue in the design of high-T$_{c}$ superconducting power cables which consist of a number of Bi-2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. So special cautions are required in the positioning of voltage leads for measuring the true loss voltage. In this work we have prepared a conductor composed of three Bi-2223 tapes with different critical currents. The ac loss characteristics in the conductor have experimentally investigated. The loss tests indicate that the ac loss is dependent on arrangements of voltage leads but not on their contact positions. The measured losses in the conductor also agree well with the sum of the transport losses measured in each Bi-2223 tape.e.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.1044-1051
• /
• 1989

A numerical calculation is carried out for the analysis of 3-dimensional compressible flow field in axial-flow rotating blades by using finite element method. The calculation of flow in impellers plays a dominant role in the theoretical research and design of turbomachines. Three-dimensional flow fields can be obtained by the quasi-three-dimensional iterative calculation of the flows both on blade-to-blade stream surfaces and hub-to-shroud stream surfaces with the introduction of viscous loss model in order to consider a loss due to viscosity of fluid. In devising the loss model, four primary sources of losses were identified: (1) blade profile loss (2) end wall loss (3) secondary flow loss (4) tip-leakage loss. For the consideration of an axially parabolic distribution of loss, the results of present calcullation are well agreed with the results by experiment, thus the introduction of loss model is proved to be valid.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.190-194
• /
• 2007

In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.58-68
• /
• 2004

This paper presents an optimal routing algorithm (ORA) for maximizing voltage stability as well as for minimizing power loss in radial power systems. In the proposed ORA, a novel voltage stability index (VSI) for real-time assessment is newly introduced based on the conventional critical transmission path framework. In addition, the suggested algorithm can automatically detect the critical transmission paths resulting in voltage collapse when additional real or reactive loads are added. To implement an effective ORA, we have developed an improved branch exchange (IBE) method based on a loss calculation index and tie-branch power flow equations, which are suggested for real-time applications. The proposed algorithm has been tested with IEEE test systems as well as a large-scale power system in Korea to demonstrate its effectiveness and efficiency.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.97-104
• /
• 1995

To evaluate readily the effect of unconfined vapor cloud explosion(UVCE) having high possibility of accident and risk in chemical industries, the expert system of UVCE was developed and its applicability on a real accident was analyzed. We found that the hazard of UVCE could be well evaluated from the TNT equivalency model and the empirical loss data produced by overpressure for chemical facilities. By using the developed expert system, the size of vapor cloud, the quantity of vaporization, the released energy, the overpressure range from explosion point, and the impact damage of each installation could be estimated respectively. Also, probable maximum loss and catastrophic loss potential for real accident( cyclohexane release in Flixborough Nypro company) were estimated and compared with damages of the accident. As a result, the developed expert system could be well applicable to real accident.

• The Journal of Information Systems
• /
• v.19 no.4
• /
• pp.253-270
• /
• 2010

The adjustment of negative emotions in later life is related to the quality of life and life satisfaction. any studies have examined how to control the negative emotions in related to physical, psychological, and social relationships. As the digital media and contents positively influence elder's mental and somatic well-being, it is significant to examine this problem from IT usage, especially the selection of digital contents. This study validated the theoretical study through a qualitative exploratory study comprising both negative emotions and the selection of digital contents, and empirically tested the proposed research model on the older people. The result shows the pattern of linkages between the grief of loss and the pursuit of digital contents. Loss from being parted by death and loss of relations was positively related to the information seeking contents. Economical loss and loss of physical functions was positively related to the innovation seeking contents. Loss of physical functions and Loss from being parted by death was positively related to the emotion seeking contents. And economic loss and loss of relations was positively related to the entertainment seeking contents.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.249-261
• /
• 2020

Background: Hearing loss is one of the most prevalent worker health conditions worldwide. Although the effect of noise exposure on hearing is well researched, other workplace exposures may account for significant hearing loss. The aim of this review was to determine whether occupational hand-arm vibration exposure through use of power or pneumatic tools, independent of noise exposure, is associated with permanent hearing loss. Do workers suffer from hand-arm vibratione-induced hearing loss? Methods: Peer-reviewed articles published in English between 1981 and 2020 were identified through five online databases with five search keywords. Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines, including online database search methodology, study selection, article exclusion, and assessment of potential study design confounders and biases, were followed. Results: Database searches retrieved 697 articles. Fifteen articles that reported 17 studies met the criteria for review. All but two studies revealed statistically significant associations between occupational exposure to hand-arm vibration and hearing loss. The majority of the study results revealed associations between hand-arm vibration and hearing loss, independent of potential age and noise confounders. Conclusion: Few studies have examined the association between occupational exposure to hand-arm vibration and hearing loss. Dose response data were limited as only one study measured vibration intensity and duration. Although the majority of studies identified statistically significant associations, causal relationships could not be determined. Further research using standardized and uniform measurement protocols is needed to confirm whether the association between occupational exposure to hand-arm vibration and permanent hearing loss is causal and the mechanism(s).

• ETRI Journal
• /
• v.42 no.6
• /
• pp.827-836
• /
• 2020

Measuring the diffraction loss for high frequencies, long distances, and large diffraction angles is difficult because of the high path loss. Securing a well-controlled environment to avoid reflected waves also makes long-range diffraction measurements challenging. Thus, the prediction of diffraction loss at millimeter-wave frequency bands relies on theoretical models, such as the knife-edge diffraction (KED) and geometrical theory of diffraction (GTD) models; however, these models produce different diffraction losses even under the same environment. Our observations revealed that the KED model underestimated the diffraction loss in a large Fresnel-Kirchhoff diffraction parameter environment. We collected power-delay profiles when millimeter waves propagated over a building rooftop at millimeter-wave frequency bands and calculated the diffraction losses from the measurements while eliminating the multipath effects. Comparisons between the measurements and the KED and GTD diffraction-loss models are shown. Based on the measurements, an approximation model is also proposed that provides a simple method for calculating the diffraction loss using geometrical parameters.