• Applied Microscopy
• /
• v.41 no.4
• /
• pp.265-276
• /
• 2011

The aim of the present study is to validate the effects of treatment with different concentration of estrogen receptor alpha agonist, propyl pyrazole triol (PPT) on the weight and histological structure in the accessory reproductive organs (ventral prostate, seminal vesicle and preputial gland) of male mouse. Treated groups received different doses of PPT 0.01 mg, 0.1 mg and 1.0 mg per week respectively, for 3, 5, and 8 weeks. In general, the weight of reproductive organs was increased in PPT 0.01 mg and 0.1 mg treatment, however decreased in PPT 1.0 mg treatment. Epithelial tissues in the ventral prostate were changed from simple columnar epithelium to squamous or cuboidal epithelium in the treated groups. On week 3, PPT groups caused decrease of epithelial cell height in the ventral prostate. Lumen of the seminal vesicle was narrowed in the treated group. Epithelial cell height of seminal vesicle was reduced in the PPT treatment. Acinus tissue of preputial gland in PPT 1.0 mg treatment was dramatically atrophied than that of control group. These results are useful as a reference to determine the administration concentration of PPT in experiments for understanding the physiological functions of estrogen in the male.

• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.148-153
• /
• 1995

Glyphosate (N-[phosphonomethyl]glycine) applied to the assimilate-exporting leaves or sprayed to the whole plants of tomato(Lycopersicon esculentum Mil var. Moneymaker) induced the rapid inhibition of 5-enolpyruvyl skimic acid 3-phosphate synthase(EPSP-synthase). It shows that EPSP-synthase activity precedes chlorophyll loss. There is no difference in EPSP-synthase activity between in vivo tomato meristem and cell suspension culture if glyphosate is not applied. The EPSP-synthase activity is in a range of 4 to 6 nkat per mg protein. The inhibition of EPSP-synthase action is induced within 36 h after glyphosate application while the Chl contents were reduced 48 h after the application. In cell suspension culture of tomato and Corydalis (Corydalis sempervirens), a sublethal concentration of glyphosate retards the fresh weight increase and prolonged lag phase. The fresh weight is reached maximal about 14 days after the subculture in the presence of glyphosate. The inhibitory effect of glyphosate on EPSP-synthase is remarkably induced in lag phase.

• Composites Research
• /
• v.35 no.6
• /
• pp.447-455
• /
• 2022

Currently, the problem of pollution of the marine environment by microplastics is emerging seriously internationally. In this study, to develop a lightweight portable microplastic collection device, the types and number of microplastics in 21 coastal areas nationwide in Korea were investigated. And CFRP (Carbon Fiber Reinforced Plastic), GFRP (Glass Fiber Reinforced Plastic), ABS (Acrylonitrile Butadiene Styrene copolymer) and aluminum were applied for design and analysis of microplastic collection device to have the durability, corrosion resistance and lightweight. As a result of sample collection and classification from the shore, it was confirmed that microplastics were distributed the most in Hamdeok beach, and the polystyrene was found to be mainly distributed microplastics. Particle information through coastal field survey and CFD (Computational Fluid Dynamics) analysis were used to analyze the flow rate and distribution of particles such as sand and impurities, which were applied to the structural analysis of the cyclone device using the finite element method. As a result of structural analysis considering the particle impact inside the cyclone device, the structural safety was examined as remarkable in the order of CFRP, GFRP, aluminum, and ABS. In the view of weight reduction, CFRP could be reduced in weight by 53%, GFRP by 47%, and ABS by 61% compared to aluminum for the cyclone device.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.425-431
• /
• 2006

In order to investigate the effects of ethylene on the seed development of three corn types (dent, sweet, and super sweet corns), aminoethoxyvinyl glycine (AVG) and silver thiosulfate (STS) and ethephon (2-chloroethylphosphonic acid, CEPA) were applied either on whole plants or shanks of ears at 9 and 21 days after silking. Ethylene production of developing super sweet corn seeds was much higher than those of sweet and dent corns. The cavity in the endosperm tissues of the super sweet corn started earlier and endosperm was collapsed more severely compared to those of sweet and dent corns. Ethylene production seemed to be related to the death of endosperm cells to form a cavity. Application of AVG and STS reduced ethylene production and delayed cavity formation in endosperm of super sweet corn seeds, while CEPA increased ethylene production and enhanced the time of cavity formation. AVG and STS increased 100-seed weight, while CEPA decreased.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.926-936
• /
• 2003

Overexpression of human Bcl-2 protein in recombinant Chinese hamster ovary (rCHO) cells producing humanized antibody (SH2-0.32) considerably suppressed sodium butyrate (NaBu)-induced apoptosis during batch culture by using commercially available serum-free medium, which extended the culture longevity. Due to the extended culture longevity provided by the anti-apoptotic effect of Bcl-2 overexpression, the final antibody concentration of 14C6-bcl-2 culture (Bcl-2 high producer, $23\;\mu\textrm{g}\;ml^{-1}$) was 2 times higher than that of the $SH2-0.32-{\Delta}bcl-2$ culture (cells transfected with bcl-2-deficient plasmid, $10.5\;\mu\textrm{g}\;ml^{-1}$) in the presence of NaBu. To determine the effect of NaBu/Bcl-2 overexpression on the molecular integrity of protein products, antibodies purified from 14C6-bcl-2 and $SH2-0.32-{\Delta}bcl-2$ cultures in the presence of NaBu were characterized by using various molecular assay systems. For comparison, antibody purified from the parental rCHO cell culture (SH2-0.32) in the absence of NaBu was also characterized. No significant changes in molecular weight of antibodies could be observed by SDS-PAGE. From GlycoSep-N column analysis, it was found that the core oligosaccharide structure ($GlcNAc_2Man_3GlcNAc_2$) was not affected by NaBu/Bcl-2 overexpression, while the microheterogeneity of N-linked oligosaccharide structure was slightly affected. Compared with the antibody produced in the absence of NaBu, the proportion of neutral oligosaccharides was increased from 10% (14C6-bcl-2) to 16% ($SH2-0.32-{\Delta}bcl-2$) in the presence of NaBu, which was accompanied by the reduced proportion of acidic oligosaccharides, especially of monosialylated and disialylated forms. The changes in microheterogeneous oligoformal structures of antibody in turn affected the mobility of antibody isoforms in isoelectric focusing (IEF), resulting in the occurrence of some more basic antibody isoforms produced in the presence of NaBu. However, the antigen-antibody binding properties were not changed by alteration of glycosylation pattern. The competitive enzyme-linked immunosorbent assay (ELISA) showed that the antibody produced by NaBu/Bcl-2 overexpression maintained its antigen-antibody binding properties with binding affinity of about $2.5{\times}10^9{\;}M^{-1}$. Taken together, no significant effects of NaBu/Bcl-2 overexpression on the molecular integrity of antibodies, produced by using serum-free medium, could be observed by the molecular assay systems.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.27-31
• /
• 2014

This paper presents a study on the strength safety of the weak parts at Part 1, Part 2 and Part 3 in the valve structure for LPG cylinder by using the finite element method. The maximum Von Mises stress of 27.5MPa was occurred at the corner edge of a valve Part 1 for the valve thickness of 1.5mm and LPG pressure of 3.5MPa. And the maximum Von Mises stresses for the valve thickness of 1.5mm and LPG pressure of 3.5MPa were 41.5MPa at Part 2 and 46.5MPa at Part 3. The FEM computed results show that the maximum Von Mises stresses at Part 1, Part 2 and Part 3 are very low value of 9.2~15.5% compared with the yield strength of a copper alloy, C3604. This means that the valve thickness for LPG cylinder is so over designed for the conventional valve. Thus, this paper recommends that the thickness at Part 1 and Part 2 is reduced for a light weight of a copper valve. But, the thickness at Part 3 may be better for a thick valve as a conventional valve for high torque strength.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.173-180
• /
• 2013

Compacted graphite iron(CGI), also known as vermicular graphite iron, is a metal which is gaining popularity in applications that require either greater strength, or lower weight than cast iron. Recently compacted graphite iron has been used for diesel engine blocks. Considering that using in exhaust manifold of the diesel engine, CGI340 was conducted the heat treatment during 1 hour to 96 hours from 873 to 1273 K. Mechanical characteristics were evaluated. The obtained results are as follows; The tensile strength of the heat treated specimens showed overall lower tensile strength than that of the base metal. Tensile strength decreases with increasing of heat treatment time, and the higher heat treatment temperature and the longer time, were more reduced. The fatigue limit by the ultrasonic fatigue test was approximately 130 MPa of base metal, 100 MPa of 1173 K (96 hrs) specimen, respectively. The hardness decreases with increasing heat treatment time, and the higher the heat treatment temperature was lowered hardness distribution. In CGI340, average hardness of nodular graphite was 120 Hv, average hardness of vermicular graphite was 114 Hv. This showed lower hardness than the base structure ferrite. The nodular graphite and vermicular graphite according to the heat treatment temperature and time didn't have a consistent change. However, the grain size of base structure grew with increasing of heat treatment time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.101-109
• /
• 2009

This CW(Construction wastes) are increasing as construction industry is growing, so many countries make efforts to recycle CW. Korea also made a stipulation for recycling CW. But the main content of this stipulation is for using recycled aggregates. Advanced countries try to increase reuse rate of not only recycled aggregate but also other kinds of wastes. So they are adopting SDM(separating dismantlement) method and we are also planning to make the system for SDM. This study is about SDM analysis through construction field investigation and difference analysis between SDM and UDM comparing predictive amount by UDM with real generated amount by SDM. First, the generated amount of construction wastes by SDM is more than estimated amount by UDM, and mixed waste was specially reduced more than UDM. The warehouse is easier than the office building to applicate SDM. But still there is no manual for SDM in the site, so establishment of SDM is demanded.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.3
• /
• pp.103-111
• /
• 2016

Seasonal dynamics of kelp forest-forming algae, Ecklonia cava population formed following the large-scale disturbance by Typhoon 'Bolaven' in August 2012 were investigated in Jeju Island, Korea. Morphological characteristics, recruits density, mortality rate, total density and biomass were monitored bimonthly from June 2013 to June 2015. Total and longest blade lengths, and individual weight of E. cava showed distinct seasonal trends. Stipe length increased from winter to spring, but did not show increase or reduced from summer to autumn. This indicates that morphological characteristics of E. cava are mainly affected by the change of blades. The optimal temperature for E. cava growth was about $15-18^{\circ}C$ during winter to spring while the growths were inhibited at the water temperature above $20^{\circ}C$ during summer. E. cava exhibited very low recruitment during spring-summer. However, high recruitment was observed on April 2015 when canopy cover was very low due to low density. This indicates that recruitment of E. cava was controlled not by seasonal effects but by physical factors such as canopy and space. The mortality rate of juvenile plants was highest due to their unstable settlement. By June 2015, 34 months after the disturbances, E. cava was almost recovered to the pre-disturbance population size structure. These results suggest that recovery of kelp forest following the large-scale disturbance requires a considerable period of time (more than three years). This study should provide valuable ecological information on management, restoration and protection of kelp species.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.277-283
• /
• 2005

LV transition curves for poly(ethylene-co-15.3 mol% octene) ($PEO_{15}$) and poly(ethylene- co-17.0 mol% octene) ($PEO_{17}$) were measured in cyclo-pentane and cyclo-hexane. Between $40{\sim}150^{\circ}C$, the LV curve for ($PEO_{15}$ + cyclo pentane) located $1.1{\sim}2.7$ bar higher than that for ($PEO_{17}$+ cyclo-pentane). In cyclo-hexane, similar behavior was observed for $PEO_{15}$ and $PEO_{17}$ solution except the pressure difference reduced to $0.9{\sim}l.6$ bar. If the backbone structure of $PEO_{15}$ were identical to that of $PEO_{17}$, the LV line for $PEO_{17}$ would locate at high pressures than that for $PEO_{15}$, since the number average molecular weight of $PEO_{17}$ (Ave. Mn=153,040) is 1.9 times higher 4han that of $PEO_{15}$ (Ave. Mn=82,200). The difference in the octene comonomer content between $PEO_{15}$ and $PEO_{17}$ is only 1.7 mole%, nevertheless this small difference in the backbone structure of the PEO greatly affected the location of the L-V curves in the mixtures comprised of PEO and cyclo-alkane.