• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.423-427
• /
• 2022

A pressure sensor that mimics the sensing ability of human skin has emerged as high-profile technology because it shows remarkable applications in numerous fields such as robotics, human health monitoring, and artificial prosthetics. Whereas recent pressure sensors have achieved high sensitivity similar to that of human skin, they still show limited detection bandwidth. Moreover, once these e-skin are fabricated, their sensitivity and stiffness are fixed; therefore, they can be used for only limited applications. Our study proposes a new adaptive pressure sensor built with uniform gallium microdroplet-elastomer composite. Based on the phase transition of gallium microdroplets, the proposed sensor undergoes mode transformation, enabling it to have a higher sensitivity and wider detection bandwidth compared with those of human skin. In addition, we succeeded in extending a single adaptive pressure sensor to sensor arrays based on its high uniformity, reproducibility, and large-scale manufacturability. Finally, we designed an adaptive e-skin with the sensor array and demonstrated its applications on health monitoring tasks including blood pulse and body weight measurements.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.242-248
• /
• 2018

Bicycle fittings have been used to ride bicycles comfortably while minimizing non-traumatic injuries. To analyze the cause of non-traumatic injuries, it is necessary to measure the body weight distribution in various biking positions. In this study, a weight distribution measurement system was implemented by installing five weighable devices on the saddle, both pedals, and both handle grips of a bicycle. To measure the body weight applied through the saddle, the structure of a commercial seat post was modified and a load cell was installed inside. Weighable pedals and handle grips were designed using a 3D modeling program and fabricated by employing a 3D printer. The body weight distribution for ten bicycle riders was measured when the two pedals were aligned horizontally and vertically. Experimental results showed that the body weight distribution varied significantly depending on human body shape, even after the bicycle fitting was completed. The difference between the body weight measured by the proposed system and a commercial scale was less than 3 %.

• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.469-480
• /
• 2020

This is the first research on the smart control and vibration analysis of a Graphene nanoplatelets (GPLs) Reinforced Composite (GPLRC) porous cylindrical shell covered with piezoelectric layers as sensor and actuator (PLSA) in the framework of numerical based Generalized Differential Quadrature Method (GDQM). The stresses and strains are obtained using the First-order Shear Deformable Theory (FSDT). Rule of the mixture is employed to obtain varying mass density and Poisson's ratio, while the module of elasticity is computed by modified Halpin-Tsai model. The external voltage is applied to sensor layer and a Proportional-Derivative (PD) controller is used for sensor output control. Governing equations and boundary conditions of the GPLRC cylindrical shell are obtained by implementing Hamilton's principle. The results show that PD controller, length to radius ratio (L/R), applied voltage, porosity and weight fraction of GPL have significant influence on the frequency characteristics of a porous GPLRC cylindrical shell. Another important consequence is that at the lower value of the applied voltage, the influence of the smart controller on the frequency of the micro composite shell is much more significant in comparison with the higher ones.

• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.1-6
• /
• 1996

The feasibility of producing a practical buried fiber optic sensor with high sensitivity for detecting intruders is demonstrated. Experiments were carried out with the use of an all fiber Michelson interferometer, the sensing arm of which was buried in sand. When the sensing arm was buried 8 inches deep in sand, the pressure length product required for a half fringe shift in: the sensor output was $1.09\;kPa{\cdot}m$. The relation between the applied weight and the phase change was almost linear. Experimental results indicated that the sensitivity of the optical fiber sensor was sufficient to detect people on foot and vehicles passing over the buried fiber.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.255-259
• /
• 2006

For the intruder detection, a buried fiber-optic sensor based on fiber-optic Mach-Zehnder interferometer is demonstrated. We buried the sensor arm in a styrene board and exerted pressure on it. The pressure-induced deformation speed has almost linear relationship with the output frequencies of the interference signals, and about 4.25 Hz frequency change per 0.01m/s was obtained. Also it has been shown that the amplitude of frequency component increases according to the weight of mass.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.4
• /
• pp.186-191
• /
• 2018

As influence of the 4th industry is growing with development of information society more electronic devices and sensor are used in the field. As this is the case, importance of signal processing during data transfer is rising Furthermore, the need for technology to remove noise caused by various reasons and to stabilize sensor output is growing as well. This research suggests digital filter algorithm that efficiently remove noise by stabilizing output of accelerating sensor. The standard value of this algorithm is calculated by applying Gaussian coefficient. To maintain its feature, final output is obtained by subtracting weight depending on variance from standard value For its evaluation, it is compared with other protocols and its function is checked through output features.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3793-3814
• /
• 2021

Most secure solutions like cryptography are software based and they are designed to mainly deal with the outside attacks for traditional networks, but such soft security is hard to be implemented in wireless sensor networks to counter the inside attacks from internal malicious nodes. To address this issue, reputation has been introduced to tackle the inside malicious nodes. Reputation is essentially a stimulating mechanism for nodes' cooperation and is employed to detect node misbehaviors and improve the trust-worthiness between individual nodes. Among the reputation models, binomial distribution based reputation has many advantages such as light weight and ease of implementation in resource-constraint sensor nodes, and accordingly researchers have proposed many insightful related methods. However, some of them either directly use the modelling results, apply the models through simple modifications, or only use the required components while ignoring the others as an integral part of the whole model, this topic still lacks a comprehensive and systematical review. Thus the motivation of this study is to provide a thorough survey concerning each detailed functional components of binomial distribution based reputation for wireless sensor networks. In addition, based on the survey results, we also argue some open research problems and suggest the directions that are worth future efforts. We believe that this study is helpful to better understanding the reputation modeling mechanism and its components for wireless sensor networks, and can further attract more related future studies.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.487-494
• /
• 2016

In order to comply with the Federal Motor Vehicle Safety Standard(FMVSS) No. 208 that has been in force since September 2003, an automatic airbag suppression system has become an essential option for detecting and protecting infants and children seated in the front passenger seat of vehicles in the U.S. market. MOBIS has developed the world's first weight-based OCS under the name NWCS. NWCS is composed of two sensors and ECU. It is sub-packaged in order to minimize the seat structure deviation. In this paper, technical features, robustness and performance of NWCS are summarized and discussed.

• Food Science and Preservation
• /
• v.1 no.1
• /
• pp.37-43
• /
• 1994

A microcomputer system consisting of 16-bit microcomputer, PCL-711S interface board, censors, and converters have been set up in order to automatically measure temperature, humidity and weight loss which are major variables of storage of apple. This system was operated by PC-LabDAS software. It has been possible to measure continuously the weight loss of Fuji apple stored in CA with the weight converter made by a miniature load cell and a strain amplifier. The temperature was checked by a k-type thermocouple and Pt 100 $\Omega$ RTD, and humidity by PQ653JAl humidity sensor. It has been possible to set up a linear equation which showers high correlationship between the estimate of temperature, weight humidity and the output of the converter in that r2 is more than 0.99. Transpiration rate, a significant factor of quality deterioration for CA storage of apple, can be estimated with these values.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1658-1660
• /
• 2004

Use of higher voltage and higher capacity of power systems and their equipment is leading to an increase in the size of the entire system. In order to reduce the cost of constructing a substation, it is necessary to reduce the size of equipment. So, this paper described optical sensor, which exploited the electric and magnetic potentiometer to sense the measured voltage and current of medium voltage GIS. It can be used both in measurement and in protection relays as its well linearity, rapid response, broad dynamic range, wide frequency band, no magnetic saturation, small in volume, light weight, and saft in insulation.