• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.219-231
• /
• 2011

Objectives : This study was designed to determine the effects of the GGEx18 ethyl acetate fraction(EF) on body weight gain, feeding efficiency ratio, and obesity-related factors in plasma as well as histology of liver and adipose tissues using high fat diet-fed male C57BL/6N obese mice. Methods : 8 weeks old, high fat diet-fed obese male mice were divided into 5 groups: C57BL/6N normal, control, EF(1), EF(2) and EF(3). After mice were treated with EF for 9 weeks, we measured body weight gain, food intake, feeding efficiency ratio, fat weight, plasma leptin and lipid levels. We also analysed histology of liver and adipose tissues on high fat diet-fed male C57BL/6N obese mice. Results : Compared with control, EF-treated mice had significantly lower body weight gain and feeding efficiency ratio. Consistent with the effects on body weight gain, EF significantly decreased the adipose tissue weight compared with control. Consistent with the effects on feeding efficiency ratio, EF significantly decreased plasma leptin concentrations compared with control. EF reduced the size of adipocytes as well as hepatic lipid accumulation compared with control. EF seems to be safe since not only the plasma levels of ALT and AST are within the normal range, but also EF did not show any toxic effects on organs. EF(3) was most effective among EF(1), EF(2), and EF(3) at doses of 25, 50, and 100 mg/kg, respectively. Conclusions : These results demonstrate that EF effectively reduces body weight gain, feeding efficiency ratio in high fat diet-fed obese mice, leading to the modulation of obesity. In addition, EF decreases the size of adipocytes and improves plasma lipids and controls hepatic lipid accumulation, suggesting that EF may act as a therapeutic agent for obesity.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.48-53
• /
• 2003

The object of this study is to examine the effect of short circuit time ratio (SCTR) and current rise delay time (Td) on the spatter generation at low and medium current range in $CO_2$ welding. The spatter was evaluated by the weight generated in the welding of bead-on-plate for 30 seconds (3 times). Td was varied by order of 0, 0.4, 0.8 and 1.2 msec. At each Td, the short circuit time ratio was varied by the output voltage of the welding power source. In the low current range, it was found that the optimum SCTR was 20~25%, and the minimum spatter generation weight was obtained in the case of Td=0.4msec and SCTR=22% even though the remarkable difference was not showed by the application of Td. In the medium current range, it was confirmed that the arc was stable though the SCTR was increased from 20% to 40% by the control of current wave. Spatter generation weight depended on the variation of Td, and the lowest value of spatter generation weight occurred at Td=0.8~1.2msec.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.27-30
• /
• 2007

Recently, use of light-weight panel is increasing in building. Styrofoam sandwich panel is inexpensive and it is excellent in insulation ability and constructability. But styrofoam of panel inside is low ignition point. Consequently, when panel is fired, it is occur in poisonous gas. On the other hand, light-weight foamed concrete is excellent in insulation ability, fire resistance due to inner pore. Properties of light-weight concrete is influenced by foaming agent type. Accordingly, this study investigate in insulation property of according to foaming agent type in order to using light-weight foamed concrete instead of styrofoam. As a results, Non-heating zone temperature of light-weight foamed concrete of using AP, FP are lower than light-weight foamed concrete of using AES. Light-weight foamed concrete of using AES, FP are satisfied with fire performance of two hours at foam ratio 50, 100. Light-weight foamed concrete of using AP is satisfied with fire performance of two hours at AP ratio 0.1, 0.15. Insulation property is better closed pore by made AP, FP than open pore by made AES.

• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.571-580
• /
• 2003

The purpose of this study was to assess the optimum coating ratio for rice, using various ratios of mulberry leaves extract, 1.0, 1.5, and 2.0%, and to determine the optimum ratio of added water, in proportion to the total weight of mulberry rice. The moisture content of the soaked rice, and the optimum water uptake rate, moisture content of the cooked rice, as well as its blue and color values, mechanical characteristics, internal structure and sensory evaluation, were analyzed. The statistical data analyses were completed using the SAS program. The results are summarized as follows: The moisture content of mulberry rice was less than that of raw rice. The average optimum water uptake of the soaked mulberry rice at the different water temperatures, 10, 20 and 30, was 20% of the total weight of the raw mulberry rice. As for the results of the sensory evaluation,; 140% water, in proportion to the total weight of raw mulberry rice, was judged to be the optimum. The average moisture content of the cooked mulberry rice was 45∼50%, but there was no significant difference in the various coating ratios. The blue value of the cooked mulberry rice awas highest on the first day of cooking. The L- and a-values decreased with increasing coating ratio, but the b-value increased under the same conditions. As for the mechanical characteristics,; the adhesiveness, hardness and springiness decreased during 2 days of storage. The internal structure of the mulberry rice, observed by SEM, showed a close structure on increasing the coating ratios of mulberry leaves extracts. It was concluded that the optimum coating ratio of mulberry rice and ratio of added water for cooking wereas 1.5 and 140%, respectively, in proportion to the total weight of raw mulberry rice.

• Journal of Nutrition and Health
• /
• v.8 no.2
• /
• pp.7-13
• /
• 1975

In the classic point of view, it has well known that the tangle is the mineral source, especially iodide. However, there are few reports that the tangle can be used the high-protein source. With the consideration whether the tangle can be used as a protein source as well as one of the foodstuff or not, this studies is done by animal experiment. The Albino rats to be examined were fed on the basal diet (Table 1) and the others including the polished tangle by weight 2%, 3%, 4% and 5%, as experimental diets, for 4 weeks, respectively. The weight gain(Fig. 1), total amount of diet intake (Fig. 2), total water intake(Fig. 3), feed efficiency ratio (Fig. 4) and protein efficiency ratio (Fig. 5) was measured by each week, respectively. In addition, organ weight (Fig. 6) and blood study (Fig. 7, Fig. 8) was also analyzed at the end of the experiment. As the results of this study, growth rate, that is, weight gain, feed efficiency ratio and protein efficiency ratio in all experimental groups increased more than those of the control group. Moreover, it was also found that weight gain, feed efficiency ratio, protein efficiency ratio by feeding on the 2 percent tangle group was higher than the corresponding values of all experimental groups. However, feed intake and total water gain were the most by feeding on the 5% tangle group. This result may be interpreted to show that the total content of sodium includes more than enough in the feed intakes. To obtain further information concerning the effect of the tangle-dietary conditions on the growth rate of Albino rats, it was measured the organ weight. In the adrenal and spleen, the total weight by feeding on the all experimental groups were decreased more than that in the case of the control group. In the other hand, in the liver the weight by feeding on the high concentration groups (4%, 5% tangle diets) were not higher than the control group, while in the case of the low concentration groups (2%, 3% tangle diets) were higher than that of the control group. When it was observed the blood components, total protein, hemoglobin, sodium, potassium, white blood cell and red blood cell of rats, the content of white blood cell by feeding on all experimental groups were lower than that by feeding on the control group, but it was also clear that in the other components except white blood cell in blood the contents by feeding on all experimental groups were similar to that in the case of the control groups. However, in the 5% tangle group, the content of sodium was the lowest of all experimental groups, where as the content of potassium was the highest of all experimental groups.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1267-1271
• /
• 2005

To investigate the effect of the frequently used anti-obese medicine GyeongshinhaeGihwan 1 (GGT1), in food intake, body weight and food efficiency ratio for high fat diet induced obese male rats. Also, to value the diffences between GyeogshinhaeGihwan 1 and FDA approved Sibutramine in anti-obesity effect. High fat diet induced obese male rats were classified into four groups - positive control group, negative control group, GyeongshinhaeGihwan 1 group and Sibutramine group - and their food intake and body weight were observed for eight weeks. Anti-obesity effect was estimated with food efficiency ratio which is calculated by weight inclose divided by food intake. The result shown in Fig. 2 suggests that the GyeongshinhaeGihwan 1 group is more effective on food intake control than the Sibutramine group. Average weight variation shows an increase in both positive/negative control group and medication group. Also, the result in Fig. 3 indicates that average food efficiency ratio decreases contrary to the average weight variation. In addition, repeatedly estimated variance analysis on average food efficiency ratio of the GyeonushinhaeGihwan 1 group shows (1) the result corollary to the time of observation of food efficiency ratio was effective under 0.05 variance (P-value 0.000). The differences between each groups were not shown under 0.05 variance. Compared to the control group, medication groups were visually more effective on food intake control. Although both groups had a tendency of weight increasing, food efficiency ratio considering food intake and weight variation rate showed a decrease. Especially, the medication group variated less than the control group corollary to the point of time, proving the individuals react less sensitive to the medicine. Moreover, there were no differences in the anti-obesity effect between GyeongshinhaeGihwan 1 group and Sibutramine group studied by repeatedly estimating variance analysis(P-value: 0.610). When considering Sibutramine as an anti-obesity medicine approved by FDA, the point of being classifed in the same group proves the effect of GyeongshinhaeGihwan 1 as an anti-obesity medicine.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.124-131
• /
• 2012

본 논문에서는 Cone-ratio 가중치 제약이 DEA 단일 입력, 다중 출력(또는 다중 입력, 단일 출력)에 맞게 constant return을 하는 문제에 적용될 때 효율성을 측정하는 방법에 필요한 특성을 제안하였다. 또한 제안된 특성들을 기반으로 DEA에서의 단일 입력, 이중 출력에 대한 다중 해결 문제의 예시를 제시한 후 Cone-ratio 및 Wong과 Beasley 가중치 제약의 특성들을 도식적으로 비교 설명하였다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.12-18
• /
• 1992

This experiment was conducted to study the factors related with yield components in 5 varieties of perennial ryegrass and was surveyed for the biological yields(BY). shoot weight(SHW). root weight (RW), leaf weight(LW), stem weight(SW), plant length(PL), leaf area(LA), number of tillcr per plant (NT), root lcngth(RL), shoot and root ratio(S/R), ratio of root length and weight(RL/RW) and weight of a tiller(WT) in autumn growth stage. These results are summarized as follows;1. The yield components were varied during the stage of growth and in relation to the varieties in autumn. 2. The yield is consisted of 73 % by shoot and 27% by root in autumn.3. The varieties of the highest biological yields were Tempo, Maprima and the lowest biological yields were P-2, Caliente in autumn. 4. The variety of Tempo was largely affected by the factors of shoot weight, root weight, ratio of root length and weight, and weight of a tiller. but the variety of Caliente was influenced by the factors of leaf weight. stem weight, leaf area, SIR ratio and weight of a tiller on the yield. 5. The highest biological yields was obtained at the time of 4~5th(10/4~1018) and the lowest yield was showed at the time of 3~4th(9/30~1014) in autumn. 6. The time of the highest biological yields were resulted that the variety of Tempo was obtained between the time of 5~6th. Maprima was obtained between the time of 1~2nd and the varieties of Manhattan, P-2, Caliente were obtained between the time of 4~5th on the stages of growth in autumn.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.363-373
• /
• 2014

PURPOSE: The purpose of this study was of scale using auditory biofeedback training and kinging training on walking speed and weight bearing ratio in patients hemiplegia with stroke to determine of the effects of such training would be maintained even after stopping the intervention. METHODS: The 30 subject were classified into three groups : 12 times, 3 times a week receiving the control, the experimental group scale using auditory and kicking training for 4 weeks. In addition, all subjects in the control group and experimental groups received the same general exercise treatment 12 times, 3 times a week for 4 weeks, and underwent follow-up tests. The significance of differences between the control group and the experimental groups was analysis by repeated-ANOVA, Interaction time and groups was analysis by repeated-ANOVA. In case where there were differences, post-hot tests were conducted using repeated measure ANOVA. RESULTS: There were significant differences in 10 m walking speed and weight bearing ratio between the control group and experimental group after the performance of the scale using auditory training and kicking training. Scale using auditory biofeedback training 4 weeks was more effective than kicking training. After 8 weeks weight bearing ratio maintained on scale using auditory training. CONCLUSION: These finding suggest that the scale using auditory biofeedback training and kicking training has positive effects on hemiplegia with stroke.