• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.149-152
• /
• 2005

To make artificial light-weight aggregate with EAF-dust and estimate ability to apply to concrete, characteristics of the aggregate were considered in density, weight of unit volume, fineness modulus and so on. And then it was executed to experiments of the concrete mixed with the light-weight aggregate. As it was results that artificial light-weight aggregate with EAF-dust was heavier and more watertight than with only clay, concrete weight of unit volume was heavier than with expended clay aggregate. But it was regarded that concrete with EAF-dust artificial aggregate was able to field application as light-weight concrete because concrete of the weight of unit volume was lighter and compress strength and workability were similar to normal concrete.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1167-1174
• /
• 2005

This paper describes on the volume change of Sewage Dredged Soils by using laboratory test and volumetric change test. The tremendous change of Moisture Content occured in the Sewage Dredged Soils during the Elapsed Time. The Unit Weight increases during the normally shrinkage limit void ratio and then the unit weight decrease. A volume of Sewage Dredged Soils according to the moisture content is a difference maximum 2.5 times. And there is the difference 3.5 times according to the change of unit weight. Therefore, the moisture content and unit weight computation are very important for the computation on the volume of Sewage Drdeged Soils.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2013

Electric arc furnace oxidizing slag from massively produced steel slag has been used in road bases and subbases, hot mix asphalt, and landfill. Electric arc furnace oxidizing slag contains iron (15%~30%) and has a high density of 3.0~3.7 ton/m3. Depending on the type and amount of concrete aggregates, the radiation-shielding characteristics can vary. Therefore, aggregates of electric arc furnace oxidizing slag can be considered for the production of radiation-shielding concrete. The experimental design of this study is experiments on Compressive strength experiments, X-ray irradiation experiments, and experiments related to the unit volume weight were carried out on hardened concrete. This experiment compared the performance evaluation of radiation shielding of concrete using electric arc furnace oxidizing slag.

• Computers and Concrete
• /
• 제33권4호
• /
• pp.471-479
• /
• 2024

In urban areas, appropriate backfilling design is necessary to prevent surface subsidence and subsurface cavities after excavation. Expandable foam grout (EFG), a mixture of cement, water, and an admixture, can be used for cavity filling because of its high flowability and volume expansion. EFG volume expansion induces a porous structure that can be quantified by the entrapped air content. This study observed the unit weight variations in the EFG before and after expansion depending on the various admixture-cement and water-cement ratios. Subsequently, the air content before and after expansion and the gravimetric expansion ratios were estimated from the measured unit weights. The air content before expansion linearly increased with an increase in the admixture-cement ratio, resulting in a decrease in the unit weight. The air content after the expansion and the expansion ratio increased nonlinearly, and the curves stabilized at a relatively high admixture-cement ratio. In particular, a reduced water-cement ratio limits the air content generation and expansion ratio, primarily because of the short setting time, even at a high admixture-cement ratio. Based on the results, the relationship between the maximum expansion ratio of EFG and the mixture ingredients (water-cement and admixture-cement ratios) was introduced.

• 한국건축시공학회지
• /
• 제24권3호
• /
• pp.319-329
• /
• 2024

본 연구에서는 국내외 단위수량 규정을 조사하고 현장 타설 콘크리트의 단위수량을 평가하였다. 콘크리트 품질을 타이틀로 하여 핵심 단어 시각화했을 때 단위수량이 높은 중요도를 가짐을 확인할 수 있었다. 또한 단위수량 관리 및 단위수량 측정 방법에서 한국과 일본 간 상대적으로 큰 차이가 나타나지 않음을 알 수 있었다. 현장에 반입된 콘크리트의 단위수량을 단위용적질량법을 이용하여 계산한 결과, 현장에서 임의로 채취한 샘플에서 단위수량이 불균일하고 가변적이며, 단위수량이 적정 단위수량 기준을 초과하는 결과를 확인할 수 있었다. 현장 타설 콘크리트의 품질관리를 위해서는 레미콘 업체, 건설업체, 검사관이 단위수량에 대한 엄격한 기준을 준수하는 것이 중요하며, 명확한 단위수량 측정 매뉴얼 제공과 철저한 교육, 주기적인 현장 점검 등 보다 체계적이고 실용적인 시스템 구축이 필요하다고 판단된다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제21권2호
• /
• pp.201-212
• /
• 2002

This paper aims to find out how did elementary students understand scientific units in science textbooks. The subjects were 191 students of the 6th grade from 7 elementary schools in 3 different areas, consisting of 70 from 4 village schools of, 64 from 2 town schools of Gyeongnam province, and 57 from one city school in Ulsan Metro City. A test was developed based on the analysis of scientific units in the science textbooks and teacher's manuals constructed according to the 6th and 7th National Science Curriculum. The understanding of elementary students' on the scientific units(Temperature, Length, Weight, Volume, Speed, Plane Angle) were surveyed. The result are as follows: Regarding the temperature unit, the students generally well understand why to measure and how to read temperature, but had some problem in recording it, in confusion with the plane angle sign. As for the length unit, they obtained high scores in understanding the purpose of measuring length as well as recording and reading it. Which indicates that they are well aware of and use the unit appropriately. With respect to the weight unit, they got high scores in reading and recording weight, which means most students have no problem using the unit. However, it was found that they do not understand why to use the plate balance scale. The volume unit was one in which the students got relatively lower scores. They do not perceive the object of using a scale cylinder and confuse it with a device of length measurement. The unit of speed is the most difficult one for children's of science to understand, presumably, because it is an derived unit from two basic units. It is also assumed that the students got the highest score in the plane angle unit because they studied the unit immediately before the test. From the children's understanding of science units above the teacher's understanding and teaching methods presumed to play a major role for children to understand and use the science units properly.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.10-14
• /
• 2015

Due to the characteristics of the vehicle structure, the magnetic levitation train has a confined bottom space thus a study on miniaturization and weight reduction of auxiliary power unit is essential. This auxiliary power unit is an essential device used for illumination, air conditioning, heating and air brake equipment excluding the motor. The previous auxiliary power unit for magnetic levitation train has used the hard switching having a high switching frequency with heavy loss in order to reduce the size of filter reactor and transformer but the reduction in volume was not significant. In this paper, by reducing the loss, reducing the size of the cooling unit and by increasing the switching frequency using the soft switching of resonant converter, it has miniaturized and reduced the weight of filter reactor and transformer which occupy significant space in the auxiliary power unit. This study has verified the performance of 50KVA grade prototype through simulated interpretation and analysis, and compared the size and weight of auxiliary power unit of the previous magnetic levitation train.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제18권2호
• /
• pp.100-107
• /
• 2015

Purpose: We investigated the iron status of very low birth weight infants receiving multiple erythrocyte transfusions during hospitalization in the neonatal intensive care unit (NICU). Methods: We enrolled 46 very low birth weight infants who were admitted to the Kyungpook National University Hospital between January 2012 and December 2013. Serum ferritin was measured on their first day of life and weekly thereafter. We collected individual data of the frequency and volume of erythrocyte transfusion and the amount of iron intake. Results: A total of 38 (82.6%) of very low birth weight infants received a mean volume of $99.3{\pm}93.5mL$ of erythrocyte transfusions in NICU. The minimum and maximum serum ferritin levels during hospitalization were $146.2{\pm}114.9ng/mL$ and $456.7{\pm}361.9ng/mL$, respectively. The total volume of erythrocyte transfusion was not correlated to maximum serum ferritin concentrations after controlling for the amount of iron intake (r=0.012, p=0.945). Non-transfused infants took significantly higher iron intake compared to infants receiving ${\geq}100mL/kg$ erythrocyte transfusion (p<0.001). Minimum and maximum serum ferritin levels of non-transfused infants were higher than those of infants receiving <100 mL/kg erythrocyte transfusions (p=0.026 and p=0.022, respectively). Infants with morbidity including bronchopulmonary dysplasia or retinopathy of prematurity received a significantly higher volume of erythrocyte transfusions compared to infants without morbidity (p<0.001). Conclusion: Very low birth weight infants undergoing multiply erythrocyte transfusions had excessive iron stores and non-transfused infants also might had a risk of iron overload during hospitalization in the NICU.

• 한국지반공학회논문집
• /
• 제32권2호
• /
• pp.53-62
• /
• 2016

흙의 다짐 특성에 영향을 주는 주요인자 중 하나인 온도는 지역과 계절에 따라 다양하게 변화하는 특성을 가진다. 최근 동토지방에서 많은 토목공사가 시행되고 있지만, 온도와 관련된 흙의 다짐기준 및 지침을 정량화할 수 있는 문헌은 미비한 실정이다. 따라서 본 연구는 온도에 따른 흙의 다짐특성을 시험을 통해 평가하고자 하였다. 시험을 위해 러시아 시베리아, 캐나다 앨버타 주 오일 샌드 지역 등에서 자주 쓰이는 성토재료인 모래의 온도별 다짐특성을 나타낼 수 있는 주문진 모래를 사용하였으며, 표준다짐시험을 흙의 다양한 온도조건($-10^{\circ}C$에서 $17^{\circ}C$)에서 수행하였다. 시험 결과 영상 온도에서는 다짐 시 벌킹 효과로 인해 흙 공시체의 부피 팽창이 발생하였으며, 그 범위는 0%~6%이였다. $0^{\circ}C$에서 $17^{\circ}C$까지 온도가 증가하면서 최대 부피(최소 건조단위중량)에 해당하는 함수비는 감소하였고, 최소 부피(최대 건조단위중량)에 해당하는 함수비는 온도가 증가함에 따라 약간 증가하였다. 영하 온도의 경우 함수비가 추가됨에 따라 건조단위중량은 지속적으로 감소하였다. 영하 온도에서는 벌킹이 발생하지 않았으며 물의 단위부피보다 얼음의 단위부피가 더 크기 때문에 흙 공시체의 부피가 증가하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.169-174
• /
• 2003

Design of a rational earth volume conversion coefficient is required as the earth volume conversion coefficient may give great influence on construction work volume and construction costs in the civil engineering works where large-scaled earth volume is excavated. However, there are a great deal of difficulties in the calculation of the exact spoil surface earth and Insufficient earth volume by adopting the figures presented on the generally used design specifications which are not the results obtained from the selection tests in calculating the earth volume conversion coefficient. In this connection, it would be desirable to calculate the earth volume conversion coefficient by carrying out large-scaled site test adequate for the relevant environment. In consequence, this study aims at calculating the exact earth volume conversion coefficient of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative exactness degree of the crossing was calculated at 0.5% in average. The relative exactness degree of 0.5% in the volume may be judged as an exact measurement as it corresponds to 0.17% of the relative exactness degree in the length measurement. We have calculated the exact earth volume conversion coefficient by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with the earth volume conversion coefficient determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of earth volume conversion coefficient, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.