• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1381-1389
• /
• 2012

The object of this study considers corrosion fatigue improvement of 7075-T6 aluminum by using shot peening treatment on 3.5% NaCl solution at room temperature. Aluminum alloy is generally used in aerospace structural components because of the light weight and high strength characteristics. Many studies have shown that an aluminum alloy can be approximately 50% lighter than other materials. Mostly, corrosion leads to earlier fatigue crack propagation under tensile conditions and severely reduces the life of structures. Therefore, the technique to improve material resistance to corrosion fatigue is required. Shot peening technology is widely used to improve fatigue life and other mechanical properties by induced compressive residual stress. Even the roughness of treated surface causes pitting corrosion, the compressive residual stress, which is induced under the surface layer of material by shot peening, suppresses the corrosion and increases the corrosion resistance. The experimental results for shot peened specimens were compared with previous work for non treated aluminum alloy. The results show that the shot peening treatment affects the corrosion fatigue improvement of aluminum alloys and the induced compressive residual stress by shot peening treatment improves the resistance to corrosion fatigue.

• KOMUNHWA
• /
• no.70
• /
• pp.109-132
• /
• 2007

Taking the Yosu Peninsula where prestige goods were prevalent and more dolmen were excavated and surveyed than other regions as object of the research, this dissertation investigated the hierarchy of dolmen society. The dolmen groups were excavated and surveyed at some 20 positions in Yosu Peninsula Analyzing the number, weight of upper stone, location, the buried relics of dolmen, the hierarchy for each dolmen group can be summarized as follows. It seems that the large group with a lot of dolmen and big upper stone which is located on the plane with stream or on the lower part of hill might be the central group with abundant buried relics. However, the size of individual upper stone does not coincide with buried relics sometimes. Thus, it is required to review the entirety of dolmen group rather than individual upper stone in the relation between the scale of upper stone and buried relics. Then the scale of tomb is proportionate to the prestige goods. Meanwhile, the discrepancy between dolmens can be verified by the difference among upper stone, tomb, burial accessories, etc in the unit dolmen group. Since dolmen is the tomb of some inhabitants in the Bronze Age, the existence of stone coffin tomb with buried bronze sword, jade or stone sword compared to the stone coffin with no relics means that there was powerful representative of one generation even in one kindred group on the basis of wealth or authority. It can be concluded that the upper stone or large tomb or prestige goods among the persons buried in dolmen were fixed as high class, those with relatively small stone coffin with no or scanty burial accessories were fixed as medium class and multitudinous class who were not buried in dolmen were fixed as low class. Therefore, the dolmen society in Yosu Peninsula shows that there was division of class in the unit dolmen group as well as hierarchy in the group.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.166-173
• /
• 2017

Morphological and population characteristics of the Cottus koreanus were investigated at Hoam stream from October 2015 and April 2016. This is the first record on C. koreanus not only from Hoam stream (the upstream region of Daejong stream, Gyeongsangbuk-do Gyeongju-si Yangbuk-myeon Hoam-ri) but also from the stream flowing into the Samcheogosip stream, in the southern part of East Sea, Korea. The distribution of C. koreanus ranged from Girim temple to Yongyeon waterfall, about 1.2 km, and the water surface were about $3,600m^2$. The population size was assumed to 1,656 individual number, 46 object per $100m^2$. The morphometric characteristics of C. koreanus in the Hoam stream and the Han river are very similar except that the population at Hoam stream shorter head length, ventral fin ray length, pectoral fin ray length and mouth width when compared with the population at Han river. Other than that, the two populations showed the same meristic characters. Frequency analysis of total length indicated that the group with 40~59 mm in total length was one year old, the 60~79 mm was two years old, and the group over 80 mm was three years old. The average number of eggs in the ovaries was estimated as 361 (239~468) per matured female. The number of matured eggs size in ovaries was $2.6{\pm}0.21$ (23.~3.1) mm and this species was large eggs type. Calculation of the length-weight relation of C. koreanus showed the value of constant a as 0.00001 and b as 3.01, and the Condition factor (K) was 1.26 an on average.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1097-1107
• /
• 2015

General VTOL aircraft uses gas turbine engine which has high power to weight ratio. However, in the VTOL UAV in small sector, the gas turbine as a prime mover is not adequate because of the limitation of the high fuel consumption ratio of the gas turbine. In this research, The Series Hybrid-Electric Propulsion System(SHEPS) has been proposed and technology survey & comparison analysis has conducted to constitute propulsion system for engine, electric motor and battery. To achieve this object a 65kg-class P-UAV from "Company I" was used. And to estimate the validity of power control algorithm and developed power management control, Matlab/simulink$^{(R)}$ has been used for the simulation. As a result, the developed algorithm worked comparatively well and the research has predicted that SHEPS was satisfied enough for 7 hour of endurance for mission profile.

• Korean Journal of Health Education and Promotion
• /
• v.17 no.1
• /
• pp.61-79
• /
• 2000

This study to study and analyze the current state of infancy breast-feeding ＆ practice and related factors and to provide basic data for the effective practice of breast-feeding and breast-feeding percentage improvement. For the object, 474 mothers of the infants who were born between Jan. 1, 1998 and Dec. 31, 1998 were selected, and the survey period ＆ method were from Oct. 15, 1999 through Nov. 14, 1999 (1 month period) and telephone interview, respectively. To examine by month breast-feeding type, the average breast-feeding percentage in 1 month after a child's birth was 42.4%, but after 6 month it decreased to 23.0%. To see breast-feeding percentage by academic background, the breast-feeding of elementary school graduated mothers was 33.3%, which was highest, and it decreased as the academic background of mothers went better (p〈0.01). By employment state, the percentage for the mothers who were not employed was higher (24.6%) than that of those who were employed at the time, which was 8.0% (p〈0.001). There was no meaningful difference found in breast-feeding percentage by infant mothers age, delivery place, infant sex, child order in family, weight at the time of birth. To examine breast-feeding percentage by delivery method, natural delivery was 27.0% which was higher than 13.1% of Caesarean section (p〈0.01), and by breast-feeding experience before leaving the hospital, 35.6% of those who have breast-fed were breast-feeding while it was 16.4% for those who never did it while in the hospital (p〈0.001). After conducting logistics multi return analysis having breast-feeding percentage as a variable at the time of 6 months after babys birth, I found that infant mothers employment state, delivery method, and breast-feeding experience before leaving the hospital become meaningful variables. As unemployed mothers (p〈0.05), as chose natural delivery (p〈0.05), as experienced breast-feeding before leaving the hospital (p〈0.001), there was more tendency to do breast-feeding. Summing the above results, I would like to suggest the following to raise breast-feeding percentage. Firstly, systematic education about the importance and advantages of breast-feeding and correct breast-feeding method should be practised for women. Secondly, vacation before and after childbirth for working women should be practised and the support of systems for working womens breast-feeding such as installation of nursery in work place are needed. Thirdly, continuous publicity and education for natural delivery inducement is necessary, and for the ones who chose Caesarean section, recommendation of breast-feeding is also needed. Fourth, for breast-feeding within fastest time after delivery, rooming-in required and legal and systematic support is also needed. Lastly, in the governmental level, publicity for breast-feeding and breast-feeding recommending programs that promotes 10 rules for successful breast-feeding bringing-up, provided by UNISEF and WHO, are to be provided.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.223-233
• /
• 2012

Steel fiber is high stiffness and large weight. So, Pumping hose to rupture of the safety management is difficult. Steel fiber caused by corrosion of the deterioration of durability and high-rebound losses are needed for the improvements. Thus, the revised regulations in 2009 by a steel fiber to reinforce other materials is possible. Variety of fiber reinforcement material for concrete review of applicability is needed. Steel fiber strength than the other fibers is large and by the geometry of the fibers are attached to improve performance. However, compared to steel fiber organic fibers and low modulus of elasticity and tensile strength of fiber and agglomeration occurs in the concrete to be used as reinforcement material is difficult. In this regard, the present study as a single object in the micro-fiber bouquet sharp entanglement through make muck attach surface area, distributed fibers from surfactant of the surface enhanced polyamide fibers, steel fiber and PP fiber reinforced concrete by comparing the scene to provide a basis for the use.

• Journal of Gifted/Talented Education
• /
• v.15 no.1
• /
• pp.67-84
• /
• 2005

In this study we investigated the adequacy of tools for distinction gifted students through the comparison these mutual relation on the basis of data, like paper test, the depths interview score, and the rest data((TTCT: Torrance Tests of Creative Thinking, IQ test, FASP: Find A Shape Puzzle, V.T: Visualization Tests and Exp: experimental ability test), and analysis data of EEG test for examining the adequacy of tools for identification gifted students. So, we developed Brain Wave gifted Index(G-Index) for finding another distinction ability as using brain waves data. The standard of index development use gifted brain characteristic in closed-eyes rest state which is judged like that characteristic of distinction between gifted and normal students is the most clear and consistence. That is, the degree of unified pattern between each object and gifted PCA pattern was defined by Pearson method which added spatial mutual index to weight concept. This refer to mean number of spatial PCA pattern. Searching for the possibility of distinction gifted gave distinction effect in 76%. The result of regression analysis on the basis of mutual relation between the rest data is . The probability formula for distinct gifted group is as follow. $$P=\frac 1{1+e^{-[-0.018(TTCT)+0.057(IQ)+1.916(FASP)+0.682(V.T)+0.088(Exp.)+0.034(G-Index)-57.510]}}$$ The result of this calculation showed that probability for distinct in gifted group was very good(95.0%). On the basis of upper result, tools for identification gifted students should be estimated as using many-sided estimation data whatever possible. And following study about development, and operation of tools for distinction suitable to gifted student in science should be progressed.

• Journal of Intelligence and Information Systems
• /
• v.7 no.2
• /
• pp.117-127
• /
• 2001

The Main object of this research is directed to LG Oil company harbor in kwangyang-hang, where various ships ranging from 300 ton to 48000ton DWT use seven berths in the harbor. This harbor suffered from inefficient and unsafe management procedures since it is difficult to set guidelines for arrival and departure of ships according to the weather conditions and the current guidelines dose not offer clear basis of its implications. Therefore, it has long been suggested that these guidelines should be improved. This paper proposes a decision-support system, which can quantitatively decide the possibility of entry or departure on a harbor by analyzing the weather conditions (wind, current, and wave) and taking account of factors such as harbor characteristics, ship characteristics, weight condition, and operator characteristics. This system has been verified using 5$_{th}$ and 7$_{th}$ berth in Kwangyang-hang harbor. Machine learning technique using genetic programming(GP) is introduced to the system to quantitatively decide and produce results about the possibility of entry or arrival, and weighted linear associative memory (WLAM) method is also used to reduce the amount of calculation the GP has to perform. Group of additive genetic programming trees (GAGPT) is also used to improve learning performance by making it easy to find global optimum.mum.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2015

This study was conducted in three years (7-9 years after planting) to investigate vegetative growth, yield, fruit quality, and return bloom for optimum crop load based on different planting densities of adult 'Fuji'/M.9 apple trees. As plant materials, 'Fuji'/M.9 apple trees planted at $3.5{\times}1.5m$ (190 trees per 10 a), $3.5{\times}1.2m$ (238 trees per 10 a), and $3.2{\times}1.2m$ (260 trees per 10 a) spacing and trained as slender spindles were used. The crop load was assigned to five different object ranges as follows: 55-64, 65-74, 75-84, 85-94, and 95-104 fruit per tree. TCA increment, total shoot growth, return bloom, yield per tree, and yield efficiency tended to increase as planting density decreased, and fruit weight and soluble solid content tended to increase as the object range of crop load decreased. Fruit red color tended to increase as shoot growth decreased. For apple trees planted with 238 trees and 260 trees per 10a, biennial bearing occurred when the crop load was over 85-94 and 75-84 fruits, respectively. However, biennial bearing did not occur when the crop load was 95-104 fruits in apple trees planted with 190 trees per 10a. Accumulated yield tended to increase as planting density and crop load increased, but that of biennial bearing did not show such a difference. Based on our results, optimum crop load recommendations are to set 95-104 fruits per tree in 'Fuji'/M.9 mature apple trees planted at 190 trees per 10a, 75-84 fruits per tree at 238 trees per 10a, and 65-74 fruits per tree at 260 trees per 10a.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.91-96
• /
• 2010

The purpose of this study is to find problems about pedestrian road of tourist resort and to make new type of sidewalk pavement with wood chip and binder using urethane resin on the parks and tourist resort. The wood chip pavement has new economics and durability with comfortable texture. Samples of these pavement materials were tested for tensile strength, permeability and ball rebound value. Also, after immersion for 24 hours, tensile strength, samples' thickness and weight were measured and discussed the strength reduction according to the water immersion. Tensile strength experimentation was examined on dry condition and water immersion. The result of examination on dry condition was 1.06MPa and on water immersion was 0.67MPa. The results showed 36.8% decreasing rate of tensile strength. Permeability experiment test based on field permeability method of pavement were conducted as a result, permeability coefficients were in the range of 0.67~0.78mm/s that all exceeds object permeability coefficient. Elasticity experiment was based on elasticity test method of Japan road association. GB coefficient was 21% and SB coefficient was 10%. GB coefficient and SB coefficient increased if fine aggregate were increased.