• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.33-40
• /
• 2003

The present study was undertaken to find relationships of plasma insulin-like growth factor (IGF)-I and IGF-II concentrations to litter size and lactation performance. Sixty pure-bred Landrace and Yorkshire pigs having similar farrowing weeks which had been selected from a large number of pregnant gilts and sows were divided into low- (<${\mu}$－0.5SD) and high-litter size (>${\mu}$+0.5 SD) lines under a 2 (breed)${\times}$2 (line) factorial arrange of treatments. After adjusting the litter size to nine piglets per sow at farrowing, total litter weight was measured at three weeks postpartum at weaning as an index of milk yield. Blood samples were obtained from the jugular vein at day (d)-90 pregnancy (Px) and at d-15 postpartum. The litter size or the number of piglets born during the present experiment and the average litter size during the entire parities up to the present one were greater in the high-line than in the low-line by 3.7 and 2.4 piglets, respectively (P<0.01); effect of the breed on litter size was not significant. Plasma IGF-II concentration at d-90 Px was greater in the high-line than in the low-line. Litter size and d-90 Px IGF-I concentration were negatively correlated in Landrace (r=－0.46; P<0.05) and tended to be negatively correlated in Yorkshire (r=－0.31; P=0.09), which resulted in a significant negative correlation between these two variables in total animals (r=－0.35; P<0.01). Litter weight at weaning was not different between the two breeds or lines. Relationships between the litter weight and IGF concentration were not consistent across the breed ${\times}$ physiological stage combinations. Results suggest that d-90 Px IGF concentrations may be indicative of the litter size at impending farrowing.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.44.2-44.2
• /
• 2017

We obtained near-infrared spectra of 26 SDSS quasars at 0.7${\sim}10^{{\wedge}{10}}M{\odot}$ to critically examine the systematic effects involved with their mass estimations. We find that active galactic nuclei (AGNs) heavier than $10^{{\wedge}{10}}M{\odot}$ often display double-peaked $H{\alpha}$ emission, extremely broad FeII complex emission around MgII, and highly blueshifted and broadened CIV emission. The weight of this evidence, combined with previous studies, cautions against the use of MBH values based on any emission line with a width over 8000 km/s. Also, the MBH estimations are not positively biased along the presence of ionized narrow line outflows, anisotropic radiation, or the use of line FWHM instead of ${\sigma}$ for our sample, and unbiased with variability, scatter in broad line equivalent width, or obscuration for general type-1 quasars. Removing the systematically uncertain MBH values, ${\sim}10^{{\wedge}{10}}M{\odot}$ BHs in 1${\sim}10^{{\wedge}{9.5}}M{\odot}$ BHs, although current observations support they are intrinsically most massive, and overmassive to the host's bulge mass.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1001-1006
• /
• 2004

Selection of optimal railway line is taken into consideration include of the purpose of railway, geographical features and facility of management. This study performed opinions of specialists, checking of industrial environment, analysis of bid guideline to select the optimal line and executed AHP method to make quality model and choose weight factors. Therefore, this study executed about six categories which are the efficiency of transportation, facility of planning and construction, economical efficiency, coincidency of planning, the civil appeal and environmental standards, connection with system, and indicated the differences of other method by analyze into specific factors of each categories.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.409-412
• /
• 2001

This paper decides provision of brightness by average value of horizontal pixel, vertical pixel association. Give weight at association value calculation to improve diagonal line characteristics, and applied method to add average of vertical pixel and average of diagonal line pixel at interpolation. Therefore it improves PSNR, and it proposed algorithm that improve horizontal outline and vortical outline characteristics in big area of luminance contrast. It changed scanning line of serial scan based on proposed algorithm and designed variable image system for efficient data transmission through PCI interface circuit.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.192-199
• /
• 2002

In continuous galvanizing process, the mass of zinc deposited and its distribution are controlled by the air pressure, effective distance from the air knife nozzle to the steel strip surface and line speed. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. This paper investigates the main cause of coating deviation and a new air knife system for control of coating thickness was developed. We investigate dynamic pressure variation by air knife types. It is found that the coating deviation is caused by the unbalance of dynamic pressure, the irregularity of strip position, and the strip vibration. Formulating a useful coating model by using present working condition, an optimal working condition is suggested. The productivity and coating quality are improved by applying the result of this research at the shop floor.

• IE interfaces
• /
• v.24 no.3
• /
• pp.258-266
• /
• 2011

In this paper, we deal with a problem improving the productivity of a discrete production line for filling a printer cartridge with toner. We develop a new technology for controlling the weight of toner which must be filled in a cartridge and reform the current line based on our new control technology to result in more than 35% improvement of productivity as well as the control accuracy. In detail, first, we find a bottleneck process, the toner-filling process which gives the current production cycle times. Second, we divide the processing time of the bottleneck into several work elements and find the rotation time of an AC servomotor to be further reduced. Third, in order to reduce the rotation time, we develop a mathematical control-time model for determining the rotation time. Finally, we reform the current line partially as required by the change of the new control method.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.338-341
• /
• 1999

PWM controlled line-side converters of modern ac traction locomotives inject harmonic currents into the feeding overhead line. This causes problem of electromagnetic interference. Passive and Active filters are usually provided for a reduction of the line harmonics. Active filters are more reasonable than passive filters in terms of weight and space of the filters. Successful control of active filters requires an accurate harmonic current reference. A technique to generate the harmonic current reference is proposed in this paper. The analysis is performed in frequency domain and its effectiveness is verified by simulation.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.45-48
• /
• 2002

This paper proposes a grid-connected inverter using the negative conductance of PV power system, which has four IGBTs and simple controller. Most of modern electric loads generate the current harmonics and the line voltage distortion. The new solar-to-ac converter(STAC) provides by emulating a negative conductance load to the line voltage, so the current harmonics from STAC is canceled the effect of the harmonics from other loads. As a result, the line voltage distortion is decreased. The proposed system have low cost, small size, and light weight compared to conventional photovoltaic converter

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1479-1484
• /
• 2011

The existing leg-rest for transmission line construction was established on the ground as a structure. As a result of that, it caused some problems such as, a tremendous forest damage, excessive construction costs and the long time of construction period. In order to solve these problems, we suggest the protective net for an air installation. It is a new method of construction which has a dielectric strength with a light-weight and high-strength. And it's not influenced by a geographical feature. This excellent method doesn't affect a forest and can reduce tremendously the construction cost and period.