• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.21-24
• /
• 2016

In this study, a optimal design on the hood automotive using eco-friendly natural fiber composites is performed. The hood of an automobile is determined by dividing the Inner panel shape through optimization phase to outer panel and inner panel. It was performed to optimize the size of the thickness of the inner panel and the outer panel by applying a flax/epoxy composite materials. The optimized shape was evaluated for weight-lightening, stability and the pedestrian collision safety. Through the resin flow analysis are confirmed to molding possibility judgment of product.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.43-50
• /
• 2016

In order to suggest the optimal manufacturing technology of composite wings of solar-powered unmanned aerial vehicles, this study compared forming technologies to reduce wing weight for long-endurance flight and to improve the manufacturing process for cost-saving and mass production. It compared the manufacturing time and weight of various composite wing molding technologies, including cocuring, secondary bonding, and manufacturing by balsa. As a result, wing weight was reduced through cocuring methods such as band type composite fiber/tape lamination technology, which enabled prolonged flight duration. In addition, the reduced manufacturing time led to a lower cost, which is a good example of weight lightening for not only small solar-powered UAVs, but also composite aircraft.

• 한국자기학회지
• /
• 제22권3호
• /
• pp.109-115
• /
• 2012

지난 5년간 NdFeB계 이방성 본드자석은 25 MGOe의 높은 자기특성을 강점으로 기존 페라이트 영구자석을 갈음하면서 모터의 경량화라는 새로운 패러다임을 주도했고 자동차용과 전동공구용 모터산업분야에서 두드러진 약진을 보였다. 또한 차체중량감소를 통한 연비향상이라는 자동차산업의 기술동향에 정확히 초점을 두고 기존모터의 50 % 경량화라는 새로운 변혁을 이끌어 냈다. 그러나 2010년 7월에 중국이 희토류원소의 수출규제를 발표함에 따라 2011년 희토류 원자재는 또 한 차례의 폭등을 기록하였고 그 여파는 전방 수요산업에 심각한 충격으로 던져지고 있다. 각 희토류 주요 소비국들은 자원 확보, 희토류 최소사용부품개발 및 희토류 대체 신기술개발 강화에 총력을 다하는 모습이다. 이러한 환경적 변화가 이방성 본드자석 분야에는 중희토류 원소인 Dy의 사용량을 줄이면서 보자력을 향상시키고자하는 기술적 도전을 유발하였고 모터고속화 응용분야에 탐색을 시도하게 하였다. 본 글에서는 희토류 자원문제에 대한 각국 희토류자석산업의 대응과 NdFeB 이방성 본드자석으로 대표되는 Aichi Steel사의 MAGFINE 자성분말에 대해 최근의 개발 동향 및 응용분야에 대해 소개하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• 동력기계공학회지
• /
• 제19권2호
• /
• pp.70-77
• /
• 2015

Nowadays, car manufacturers applied many high strength steels such AHSS or UHSS to car bodies for weight lightening. Therefore, a variety of applied steel sheet to car bodies increased and the needs of simulation to evaluate weldability also increased in order to reduce the cost and time. In this study, resistance spot welding simulations for DP 780 Steel with 1.0 and 1.4 mm thickness were conducted with respect to lobe curve. 2 regression models to estimate tensile shear strength were suggested and they were second order polynomial regression model and optimized second order regression model. The performance of these models was evaluated in terms of the coefficient of determinant and average error rate.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.830-835
• /
• 2012

A research for application of LDSMC(Low Density Sheet Molding Compound) composite is in progress for lightening the weight. This paper has performed fatigue test and simulation of external panel for Korean commercial vehicle. Before the fatigue test, static test was carried out. From the test, the structural safety was investigated using Goodman diagram. After the static test performance, the fatigue test was conducted at a range of load frequency 5Hz, a stress ratio(R) of 0.05 and an endurance limit of $10^6$ to obtain the S-N curve. The S-N curve is applied to the fatigue analysis of the external panel assembly. The result of FEM analysis was in accord with the experimental result within 83% confidence. It showed that the process to set up the safety range of allowable error is required in process of the design and simulation verification.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.171-177
• /
• 2004

일반적으로 압전변압기는 고압을 출력하는 전원장치로 사용되고 있으나, 최근 어댑터와 같은 AC/DC 전원장치에 이를 채용하려는 움직임이 활발히 전개되고 있다. AC/DC 컨버터의 소형 경량화론 위해 기존의 권선형 변압기 대신 압전변압기는 AC/DC 컨버터용이 아닌 LCD 백-라이트구동용으로 제작된 압전변압기(piezoelectric transformer)를 사용하여 AC/DC 컨버터의 기본 특성을 고찰하고자 한다. 압전변압기의 재질, 특성 값으로부터 등가회로의 모델링을 수행하고, 이를 시뮬레이션과 실험을 통하여 검증한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.219-224
• /
• 2000

A research for development of composite body panel is in progress for lightening tare. Low specific weight LPMC (Low pressure molding compound) has advantages such as lightweight and resistance to dent and corrosion. In this study, tensile, bending and impact tests for the LPMC and SPRC35 (High tension steel plate) were carried out and compared. Although mechanical properties of SPRC35 are better than the LPMC, the LPMC satisfies basic requirements for car body panel. The high temperature exposed LPMC were degraded due to fiber-matrix debonding and deterioration of resin.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.69-75
• /
• 2018

Recently, various convergence technologies are attracting attention due to the block chain innovation technology in the M2M environment. Although the block-chain-based technology is known to be secure in its own right, there are various problems such as security and weight reduction in various M2M environments connected with this. In this paper, we propose a new lightweight method for the hash tree generation of block chains to solve the lightweight problem. It is designed considering extensibility without affecting the existing block chain. Performance analysis shows that the computation performance increases with decreasing the existing hash length.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.39-45
• /
• 2014

With recent oil price increases, the fuel efficiency of hydraulic excavators has become a serious issue. Researchers have considered weight lightening by high pressurization in order to improve the efficiency of the excavator and pump controlled actuation (PCA) and to reduce pressure loss of hybrid and valves using mechanical inertia. However, high pressurization is not very effective because the excavator operates at a low speed; a hybrid is inefficient because little accumulated inertial energy is accumulated; and PCA is ineffective because control precision and responsibility are low. In this study, a method to minimize air and gas in hydraulic oil has been presented as a simple and new way to increase hydraulic efficiency.