• 한국식생활문화학회지
• /
• 제15권4호
• /
• pp.313-323
• /
• 2000

Although it is rapidly increasing the number of day-care centers in Korea, the quality of food and nutrition services is not improved sufficiently. The purpose of this study was to investigate the nutrition and health status of children in day-care center. Menus for lunch of 253 centers were collected and the content of nutrients was analyzed. Nutrient intakes from lunch and snacks of 90 children were investigated using weighing method and those from breakfast and dinner by 24-hour recall method surrogated from their mothers. Anthropometric indices of height, weight, skinfold thickness, the ratio of fat were measured. The lunch menus for children contained $437.0{\pm}138.9\;Kcal$, $17.6{\pm}6.7gr$ protein, $153.9{\pm}87.7mg\;Ca$, $3.63{\pm}1.6mg\;Fe$, $164.5{\pm}158.2RE\;Vit\;A$. and $4.46{\pm}3.04mg\;Vit\;B_1$. Energy, Ca and Fe supplied were below one third of RDAs. Mean daily calorie intake of children aged 3 years was $1303.0{\pm}474.0Kcal/day$, $1322.3{\pm}442.4Kcal$ in aged four, $1307.0{\pm}545.9Kcal$ in aged five and $1497.1{\pm}93.5kcal$ in six year of age. Intake of iron, vitamin A and vitamin $B_1$ were below RDAs.

• Journal of Nutrition and Health
• /
• 제27권8호
• /
• pp.794-804
• /
• 1994

This study was conducted to investigate the relationship between lactational capacity and intakes of energy and energy-yielding nutrients. Food consumption, intakes of carbohydrate, protein, fat and energy and quantity and proximate composition of milk of 11 lactating Korean mothers were determined at 1, 2 and 3 months postpartum longitudinally. Food consumption was estimated using a 24-hour recall method ; intakes of energy and energy-yielding nutrients were calculated according to the Food Composition Table. Daily milk production was estimated using a 72-hour test-weighing method ; protein, fat, lactose and energy concentrations were analyzed. Average intakes of energy and protein were 1974$\pm$386㎉/day and 67.0$\pm$12.3㎉/day, these were 73% and 74% of the Korean Recommended Allowances, respectively. Average milk yield was 720.1$\pm$123.3ml/day containing energy 59.6$\pm$9.5㎉/dl, protein 1.1$\pm$0.1g/dl, fat 2.7$\pm$0.8g/dl, and lactose 6.3$\pm$0.3g/dl. No relationship existed between the intakes of carbohydrate, protein, fat and energy and the quantity and proximate composition of the milk. However, the intakes of energy, carbohydrate and vegetable protein were inversely related to the concentrations of energy and lactose in the milk. This result indicates that lactational capacity may be affected by the other factors excluding intakes of energy and energy-yielding nutrients and a high intake of energy may not guarantee optimal lactational capacity.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.34-42
• /
• 2009

There are many accident causes related to even an accident. As well four(4) stepped causes of one accident at construction sites are analyzed in the study. First, eleven(11) cause factors are set up at each step such as policy level, management, indirect, direct level which are discussed and determined by field experts with 15year experience or more. Therefore, one direct cause occurred in construction site can be connected to the previous cause than in direct and management, and policy problem of previous management. These questionnaires results are analyzed with three different methods such as weighing level by Delphi technique, correlation analysis, critical pass method. Three different methods show their characteristic to see which subcontract work is more dangerous or not. Subcontract or at a construction site can be use the above three different cases as they need at their site in order to make more effective countermeasures.

• Journal of Nutrition and Health
• /
• 제29권8호
• /
• pp.899-907
• /
• 1996

This study was conducted to examine how Korean women mange energy metabolism during lactation. Eighteen women recruited were healthy, had normal pregnancies and were required to breast-feed their babies exclusively for at least 12wks. During the study period, all subjects were visited and interviewed five times : 3d, 9d, 4wk, 8wk, and 12wk lactation. Body composition variables were analyzed by a bioelectrical impedance method, energy intakes were assessed by using the inventory-weighing method, energy expenditure were determined by recording daily activities, and milk energy output was investigated from the amount of milk production and the gross energy content of milk. The subjects consumed less energy than current recommended allowance all over the study period, but compatible with fairly adequate lactational performance. They responded the additional energy stress of lactation by enhancing metabolic efficiency, increasing energy intakes, reduction physical activities and mobilizing body reserves. Another finding in this study was that the reduction in body fat-free mass may be the one way that women meet the energy demands of lactation like the reduction in body fat mass. The results from this study suggest that current recommended additional energy need during lactation, 2.09MJ/d(500kcal/d), is too high for healthy Korean women. Our data also indicate that the changes of body composition and energy balance at earlier postpartum are extremely different from those at later periods.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.549-560
• /
• 1989

본 논문은 광대역 신호처리 DCMP 알고리즘에서 필터로서 동작하는 초기가중치의 설정 방법을 제안하였고 컴퓨터 시뮬레이션을 통해 최적의 Tap 수를 결정하는 방법을 기술하였다. 광대역 비임 형성기를 FiR 필터 개념으로 분석하여 원하는 신호의 입사 방향에 대한 제한 조건을 얻었고 이 제한 조건으로 부터 적응 속도가 빠른 초기 가중치를 설정하였다. 본 논문에서 제안된 초기 가중치를 기존의 DCMP프로세서나 공간 영역 평균법을 수행하는 프로세서에 적용할 때 원하는 신호의 입사 방향과 일치하는 잡음 그리고 Cohenrent Noise를 반복 적용하는 과정에서 동시에 제거할 수 있음을 컴퓨터 시뮬레이션으로 확인 하였다.

• 대한치과의사협회지
• /
• 제9권5호
• /
• pp.235-239
• /
• 1971

The effects of folic acid on the oral mucosa of albino rats were histochemically studied in the twenty four male rats, weighing abut 100gm. Seven groups of 3 each were injected with 0.2ml folic acid (folic acid 0.5mg. was dissolved in physiological saline 0.2ml) subcutaneously, during 1,2,3,5,7,10 and 14 days respectively. Oral mucosa of rats sere removed from upper molar region and fixed in 10% formalin, cold absolute alcohol, Carnoy's solution and acetone. The serial sections were histochemically stained by McManu's PAS reaction, Mowry's metachromasia, alloxan-Schiff reaction, and azo dye method for alkaline phosphatase. The comparative staining method was hematoxylin-eosin stain. The results were as follows: 1) Alkaline phosphatase reaction of stratum spinosum and stratum granulosum tended to increase after 7 and 10 days of folic acid administration. 2) PAS reactions of basement membrane and lamina propria increased after folic acid administration. 3) Metachromasia of stratum spinosum and stratum granulosum were slightly increased after 3,5 and 7days of folic acid administration and returned to the level of Control after 10 days. 4) In the oral mucosa, alloxan-Schiff reaction increased after 7 days of folic acid administration.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.724-730
• /
• 2010

A load cell is a converter that generates voltage signals when a certain force is effected in a given direction. An essential measurement device for electronic scales that indicate weight by numbers. These load cells are being applied in various areas such as daily life, distribution, laboratory and industrial. Recently the study to manufacture load cells in a more simple method while increasing performance is being persisted. In this study based on the comparison of load cells manufactured through single surface processing using strain gauges. Those manufactured through dual surface processing using strain gauges. Ultimately persist a more simple method of load cell manufacturing while increasing its performance. The elements that were compared were linearity, hysteresis, creep and eccentricity which are short tenn performance factors. The conclusion was that single surface processing showed almost identical data as that of dual surface processing, and the load cell error rate(0.005%) also excess regulation. The manufacturing time was shortened while mass-production was possible. Which indicates a development in the weighing industry.

• 한국국방경영분석학회지
• /
• 제28권2호
• /
• pp.85-94
• /
• 2002

Calculation of proper expenses on acquisition and purchasing defense product is matter of survival and weighing the morality for both defense industry and the national facilities. With this reason, both parties have been a big job to estimate the resonable cost. The cost are composed of many subordinated parts such as material cost, labor cost, and so on. In the compositions of that cost, the most important part in between companies and the government throughout the whole calculating process is to define the proper labor cost. When both parties calculate imported articles or overhead expenses, they can easily calculate and confirm by documented evidences or related materials. In other hand, the labor cost, which can be seen as two absolutely different numbers and opinions can be created, depends on analyzer's point of view. These interpretation and judgment of data cannot avoid analyzer's intention. In accordance with the above matters, defining the reasonable labor cost will be the top priority in order to analyze the proper expenses. This study will provide a method of proper labor cost estimation before starting the actual manufacturing to calculate the rational labor cost.

• 한국토양비료학회지
• /
• 제32권4호
• /
• pp.344-356
• /
• 1999

토양수분 확산계수 추정을 위한 이론식(Mualem's principle)과 실측법(Hopmans' equation)을 제시하여 실험한 결과 실측치와 이론치의 상당한 근접을 보였으므로 Hopmans의 수치해석적 모형을 실측모형으로 재시하고자 한다. 작물계수 측정에 있어서는 생육시기에 따른 모형화보다는 생육온도에 따른 모형화가 함수 관계에 있어서 보다 더 유의성 있는 상관성을 보였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권2호
• /
• pp.24-27
• /
• 2021

This paper presents a design methodology of high-temperature superconducting (HTS) magnets. The magnet consists of several double pancake coils with a variety of wire width. This technique, named Multi-Width, is well known to make efficient use of the superconducting wire. It is common for design of high-temperature superconducting magnets to not only reduce wire consumption used, but also consider the homogeneity of the magnetic field. In this paper, we study a design method that efficiently reduces wire usage while considering magnetic field homogeneity. The design is carried out by calculating the critical current and the critical magnetic field according to the configuration of arranging the thickness of the wire to determine the number of windings. The width of wire comprising the magnet was set to 4 - 12 mm, and the number of double pancake coils was set to an even number to consist of top-down symmetry. To verify the validity of the design, we compared the progress of the design code with a complete enumeration survey. As a case study, we designed a magnet that generates a central magnetic field of 3 T or more in a 240 mm bore in diameter. Optimality can be evaluated by weighing wire consumption and field homogeneity according to the magnet's use or user preference.