• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.179-188
• /
• 2012

PURPOSES: The aim of this study is to analyze overloading control effectiveness of enforcing overweighted vehicles using HS-WIM (High-Speed Weigh-in-Motion) at main lane of expressway. METHODS: To analyze the weight distribution statistically, HS-WIM system should has an appropriate weighing accuracy. Thus, the weighing accuracy of the two HS-WIM systems was estimated by applying European specifications and ASTM (American Standards for Testing and Materials) for WIM in this study. Based on the results of accuracy test, overweight enforcement system has been operated at main lanes of two expressway routes in order to provide weight informations of overweighted vehicle in real time for enforcement squad. To evaluate the overloading control effectiveness with enforcement, traffic volume and axle loads of trucks for two months at the right after beginning of the enforcement were compared with data set for same periods before the enforcement. RESULTS: As the results of weighing accuracy test, both WIM systems were accepted to the most precise type that can be useful to applicate not only statistical purpose but enforcing on overweight vehicles directly. After the enforcement, the rate of overweighted trucks that weighed over enforcement limits had been decreased by 27% compared with the rate before the enforcement. Especially, the rate of overweighted trucks that weighed over 48 tons had been decreased by 91%. On the other hand, in counterpoint to decrease of the overweighted vehicle, the rate of trucks that weighed under enforcement limits had been increased by 7%. CONCLUSIONS: From the results, it is quite clear that overloading has been controlled since the beginning of the enforcement.

• 대기
• /
• 제27권2호
• /
• pp.251-258
• /
• 2017

The standard weighing raingauges have a capacity limit in measuring the amounts of precipitation. Exceptions are those using a siphon to drain the collected water during observations. To reduce the drain time of the siphon type or to overcome the hassles associated with the manual emptying of the bucket for measuring, the most of weighing gauges use a large bucket for storing of rainwater to be measured. To avoid the above-mentioned adverse requirements, we propose a paired barrel for a weighing raingauge. The paired barrel may improve the accuracy of the weighing raingauges by getting rid of their capacity limit and make the gauges smaller in size and lighter in weight than the conventional ones. We showed its proper function and the feasibility of realization by testing a prototype paired barrel.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• 대기
• /
• 제29권3호
• /
• pp.269-282
• /
• 2019

While it is important to obtain the accurate information on snowfall data due to the increase in damage caused by the heavy snowfall in the winter season, it is not easy to observe the snowfall quantitatively. Recently, snow measurements using a weighing precipitation gauge have been carried out, but there is a problem that high snowfall intensity results in low accuracy. Also, the observed snowfall data are sensitive depending on wind speed, temperature, and humidity. In this study, a new process of quality control for snow water equivalent (SWE) data of the weighing precipitation gauge were proposed to cover the low accuracy of snow data and maximize the data utilization. Snowfall data (SWE) observed by Pluvio, Parsivel, snow-depth meter using laser or ultrasonic, and rainfall gauge in Cloud Physics Observation Site (CPOS) were compared and analyzed. Applying the QC algorithm including the use of number of hydrometeor particles as reference, the increased SWE per the unit time was determined and the data noise was removed and marked by flag. The SWE data converted by the number concentration of hydrometeor particles are tested as a method to restore the QC-removed data, and show good agreement with those of the weighing precipitation gauge, though requiring more case studies. The three events data for heavy snowfall disaster in Pyeongchang area was analyzed. The SWE data with improved quality was showed a good correlation with the eye-measured data ($R^2$ > 0.73).

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.21-26
• /
• 2007

In industry, multihead automatic combination weighers are used to provide accurate weights at high speed. To minimize giveaway, greater accuracy is desired, especially for valuable products. This paper describes a combination algorithm based on bit operation. The combination method is simple and saves time, since only the elements to be considered for combination are generated. The total number of combinations from which the desired output weight is chosen can be increased by extending the combination from memory hoppers to include some weighing hoppers. For an eight-channel weigher, three or four combination elements are best. In addition to targeting approximately equal amounts of products in each channel, this study investigated other schemes. Simulation results show that schemes targeting combination elements with an unequal distribution of the output weight are more accurate. The most accurate scheme involves supplying products to all memory and weighing hoppers before commencing the combination operation. However, this scheme takes more time.

• 한국결정학회지
• /
• 제8권1호
• /
• pp.38-47
• /
• 1997

새로운 방식의 결정성장용 직경 자동제어장치를 개발하였다. 이 장치는 금속선의 장력 변화를 주파수로 변환시켜 감지하는 무게센서로서 신호전달 및 전력공급 체계가 무접촉 방식이므로 노이즈가 극소화되며 따라서 안정성, 정밀성이 종래의 센서에 비해 10배 이상 증대된다. 이 장치에서 무게센서 부분은 1) 금속선, 2) 시그날을 형성하는 Sinusoidal Wave Generator, 3) 형성된 시그날의 진폭을 조정하고 안정화 시켜주는 자동 증폭조절회로, 4) 정류장치 및 신호 변환기, 5) 시그날을 관리, 제어하는 PC 보드 등으로 구성하였고, 그 외에 2개의 검증용, 무게보정용, 성장제어용 등 4개의 프로그램을 작성하였다. 이 장치는 표준편차 값이 $\pm0.10g$(1회/sec 측정 때), 분해능이 $5{\times}10^{-5}$이고, 최대 200kg까지 결정을 성장시킬 수 있으며, 또한 압력조건은 진공조건부터 200 atm 이하, 온도조건은 $350^{\circ}C$ 이하에서 일관성, 재현성 있는 작동이 가능했다. 단결정 자동직 경제어에 필요한 정확도를 확보하기 위해 온도범위 $100^{\circ}C$가 $\pm0.025^{\circ}C$로자동 조절되도록 '시그날 Divider'를 제작하였다. 이 무게 센서를 $Y_3Sc_2Ga_3O_{12},\;Er-Y_3Sc_2Al_3O_{12},\;Bi_{12}GeO_{20}$ 등의 단결정 성장에 응용하였으며 매우 양호한 결정을 성공적으로 성장시킬 수 있었다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.36-43
• /
• 2024

The yield is basic and necessary information in precision agriculture that reduces input resources and enhances productivity. Yield information is important because it can be used to set up farming plans and evaluate farming results. Yield monitoring systems are commercialized in the United States and Japan but not in Korea. Therefore, such a system must be developed. This study was conducted to develop a yield monitoring system that improved performance by correcting a previously developed flow sensor using a grain tank-weighing system. An impact-plated type flow sensor was installed in a grain tank where grains are placed, and grain tank-weighing sensors were installed under the grain tank to estimate the weight of the grain inside the tank. The grain flow rate and grain weight prediction models showed high correlations, with coefficient of determinations (R2) of 0.9979 and 0.9991, respectively. A main controller of the yield monitoring system that calculated the real-time yield using a sensor output value was also developed and installed in a combine harvester. Field tests of the combine harvester yield monitoring system were conducted in a rice paddy field. The developed yield monitoring system showed high accuracy with an error of 0.13%. Therefore, the newly developed yield monitoring system can be used to predict grain weight with high accuracy.

• Journal of Nutrition and Health
• /
• 제23권2호
• /
• pp.93-107
• /
• 1990

The purposes of this investigation were to determine the validity of various methods (available anthropometric equations and near-infrared light interactance) for estimating body fat and to develop multiple regression equations for the prediction of body fat. Thirty-eight healthy males(age: 20.87$\pm$7.17 yrs) and 12 females(19.58$\pm$2.19 yrs) underwent hydrostatic weighing to determine body fat. Anthropometric measurements were taken of height, weight, nin skinfolds and thirteen circumferences. The results obtained are summarized as follows: 1) Relative body fat determined by underwater weighing was 12.08$\pm$5.21% for the males and 17.97$\pm$5.75% for the females. 2) Circumference and skin fold that had the highest correlation with the body fat were waist girth in males and females(r=0.60, r=0.96, respectively), and subscapular in males(r=0.68) and triceps in females(r=0.96). 3) Corss-validation of 18 selected equations on males revealed total errors ranging from 3.76% to 5.06%. Among these equations, M3(Pollock et al.) demonstrated the least total error. Total error of estimation by near-infrared(NIR) was less than that of available anthropometric measurement equations. The results of the cross-validation of 12 equations on females revealed that F3(Sloan et al.) was clearly superior in accuracy of prediction. 4) Correlational analyses showed that estimation of body fat by NIR measurement seemed to be more closely associated with body fat determined by underwater weighing in women than men, in older subjects than younger ones, and in fatter subjects than leaner ones.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.50-55
• /
• 2008

The diverter system is a key component in achieving a high accuracy liquid flow rate standard using a static gravimetric system with a flying start and stop method. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.77-83
• /
• 2015

This paper is a study of the functions required for the system to quantify the closest target weight by combining several random weights such as chips, snacks, fruits, and vegetables. The multi-head weigher is designed for high-performance applications requiring increased production rates and tight accuracy tolerances. This combination system has 12 heads considered in the form of a rectangular array of $2{\times}6$ or $3{\times}4$. Channel combination can usually occur between 1 and n, and the frequency was the highest with two or three combinations. Experimental result of a combination system for a total target weight was measured at the range from 100g to 500g by increments of 50g, and the average success rate was about 70%. The average elapsed time was about 1.7 seconds, which means it can be used for the packaging of agricultural products with a variety of items.